Nanoscale structural characteristics and electron field emission properties of transition metal–fullerene compound TiC60 films

Transition-metal compound TiC₆₀ thin films were grown by co-deposition from two separated sources of fullerene C₆₀ powder and titanium. Study of structural properties of the films, by Raman spectroscopy, atomic force microscopy, and scanning tunneling spectroscopy reveals that the films have a deformed C₆₀ structure with certain amount of sp³ bonds and a rough surface with a large number of nanoclusters. z–V tunnelling spectroscopic measurements suggest that several charge transport mechanisms are involved in as the tip penetrates into the thin film. Conventional field electron emission (FEE) measurements show a high emission current density of 10 mA/cm² and a low turn-on field less than 8 V/μm, with the field enhancement factors being 659 and 1947 for low-field region and high-field region, respectively. By exploiting STM tunneling spectroscopy, local FEE on nanometer scale has also been characterized in comparison with the conventional FEE. The respective field enhancement factors are estimated to be 99–355 for a gap varying from 36 to 6 nm. The enhanced FEE of TiC₆₀ thin films can be ascribed to structural variation of C₆₀ in the films and the electrical conducting paths formed by titanium nanocrystallites embedded in C₆₀ matrix.     

Remotely powered addressable UHF RFID integrated system

This paper presents a fully integrated remotely powered and addressable radio frequency identification (RFID) transponder working at 2.45 GHz. The achieved operating range at 4 W effective isotropically radiated power (EIRP) base-station transmit power is 12 m. The integrated circuit (IC) is implemented in a 0.5 /spl mu/m silicon-on-sapphire technology. A state-of-the-art rectifier design achieving 37% of global efficiency is embedded to supply energy to the transponder. The necessary input power to operate the transponder is about 2.7 /spl mu/W. Reader to transponder communication is obtained using on-off keying (OOK) modulation while transponder to reader communication is ensured using the amplitude shift keying (ASK) backscattering modulation technique. Inductive matching between the antenna and the transponder IC is used to further optimize the operating range.     

Video Compression - From Concepts to the H.264/AVC Standard

Over the last one and a half decades, digital video compression technologies have become an integral part of the way we create, communicate, and consume visual information. In this paper, techniques for video compression are reviewed, starting from basic concepts. The rate-distortion performance of modern video compression schemes is the result of an interaction between motion representation techniques, intra-picture prediction techniques, waveform coding of differences, and waveform coding of various refreshed regions. The paper starts with an explanation of the basic concepts of video codec design and then explains how these various features have been integrated into international standards, up to and including the most recent such standard, known as H.264/AVC.     

High Pressure Conductivity and Photoconductivity of Polyveratrole

Summary Electropolymerization of o-(CH₃O)₂C₆H₄ (Veratrole) in dry acetonitrile/tetrabutylammonium tetrafluoroborate at platinum electrode, yields a green polymeric conducting solid. As the pressure is increased, the material becomes more conductive, but sharp changes towards lower conductivity occur at 4.2 and 6.2 metric tons pressure, probably due to phase transitions. The photoconductivity shows an exponential increase as temperature is increased, but it shows reversible changes at 200 K, 225 K and 250 K during slow warming, also attributable to phase transitions. Photoconductivity of Polyveratrole increases with the radiation frequency, being higher under blue light than under red of infrared radiation and there is a linear increase of photoconductivity with radiation density. Conductivity transients show that the conductivity increases exponentially with time to the saturation point within few minutes, and it also decreases exponentially when the light is turned off and the circuit is open. This behaviour can be explained by formation and encounter of electron and hole as current carriers. A preliminary study indicates a piezoelectric effect for the material. absorption spectroscopy allowed the measurements of the material band gap.     

Optimal design and manufacture of thin‐walled polystyrene structures

In this study, we investigated the implementation of an automatic procedure for optimizing thermoformed thin‐walled structures. Such objects are created in great numbers, especially in the food packaging industry. The methodology for the optimal design of such structures is based on the use of a parameterized geometry model created within an interactive design environment. By varying the parameters associated with the computer‐aided design (CAD) model, one can create a rich variety of possible designs. One can then subject these designs to physical analysis to calculate their physical properties, and thus select an optimal design. The two distinct stages of this process—the prediction of the shape of the thermoformed structure, and the physical behavior of the structure—were validated by experiments. This article reports the experimental investigation of the deformation behavior of polystyrene, the mechanical behavior of specially prepared deformed polystyrene sheets, and the response to loading of a hemispherical structure (used in the validation). POLYM. ENG. SCI., 45:694–703, 2005. © 2005 Society of Plastics Engineers     

Ozonation Impact on Degradation and Toxicity of Non-Ionic Surfactants

Aqueous solutions of five selected non-ionic surfactants: Triton (i-octylphenolethoxylates), Tergitol (2,6,8-trimethyl-4-nonanoloxethylates), Symperonic (n-nonylphenol-oxethylates) and Brij (fatty alcohol ethoxylates) were investigated in this study. Using the bioluminescent bacteria Vibrio fischeri the toxicity of the surfactants solutions were determined. An attempt was made to relate rather low biodegradability of nonionic surfactant solutions measured by the BOD₅/COD ratio (ranging from 1 to 17%) to their toxicity. The ozonation process was carried out in a 1.5 dm³ stirred cell reactor equipped with two ozone detectors. The following parameters were analyzed: pH, COD, BOD₅, DOC, TOC, polarography as well as UV spectrum. The positive effect of ozonation, represented by decay of UV absorption, was visible in almost complete destruction of the surfactants, with exception of Triton X-705 (only 65% degradation after absorption of 2000 mgO₃/dm³). The most striking results were obtained in toxicity tests for ozonated solutions of the non-ionic surfactants – an increase of the bacterial growth inhibition (1.5 to 4 times increase in toxicity due to ozonation). The obtained results were discussed taking into account the literature and our own experimental data on mechanisms of ozonation and biodegradation of non-ionic surfactants of the Triton-type and similar chemical structures.     

Reaction scheme and kinetic modelling for the MTO process over a SAPO-18 catalyst

A kinetic model for simulation of the MTO process over SAPO-18 catalyst in a wide range of operating conditions has been proposed. The kinetic model predicts the experimental evolution of reaction products with time on stream, which follows three consecutive periods: initiation (where olefin production increases), a period of maximum olefin production and a period in which this production decreases. The kinetic scheme takes into account these three steps that evolve with time on stream: formation of active intermediate compounds, an step where olefins are formed by reaction of oxygenates (methanol/DME) with these intermediates and deactivation of intermediates by degradation to coke. The presence of water in the reaction medium attenuates the reaction rate of these steps. Discrimination of kinetic equations and calculation of the parameters of best fit have been carried out by solving the mass conservation equations of the individual components of the kinetic scheme together with the kinetic equation for deactivation and taking into account the effect of water on the kinetics of each step.     

On the learning control of a robot manipulator

This paper derives a learning control law to achieve trajectory following for a robot manipulator. The controller consists of two parts, a computed torque servo for the rigid body terms that can be modelled and a learning law for the unmodelled dynamics. An advantage of this method is that bounds can be assigned to the position and velocity tracking errors.     

Computerized conferencing for knowledge acquisition from multiple experts

The increasing complecity of many expert system application areas calls for the integration of the knowledge of multiple experts. The use of multiple experts introduces some interesting new problems during the process of knowledge acquisition. The problems are further complicated when the experts are geographically dispersed or unavailable for face-to-face interactions.

This article discusses the motivations for acquiring the knowledge of multiple experts, the problems related to knowledge acquisition, new issues that arise whens multiple experts interact, solutions that can be brought to bear in building multiple expert systems (particularly when experts are geographically dispersed), and new tools for knowledge engineers to use when dealing with multiple experts.     

PROMOT: a FORTRAN program to scan protein sequences against a library of known motifs

Information about the three-dimensional structure or function of a newly determined protein sequence can be obtained if the protein is found to contain a characterized motif or pattern of residues. Recently a database (PROSITE) has been established that contains 337 known motifs encoded as a list of allowed residue types at specific positions along the sequence. PROMOT is a FORTRAN computer program that takes a protein sequence and examines if it contains any of the motifs in PROSITE. The program also extends the definitions of patterns beyond those used in PROSITE to provide a simple, yet flexible, method to scan either a PROSITE or a user-defined pattern against a protein sequence database.