Slowly moving hull forms in short waves

The purpose of this paper is to provide a mathematical tool to improve the optimal design of ship forms. It is common practice that hull forms are designed such that they have minimum wave resistance in calm water. In this paper a theory is described by which the effect of short waves may be incorporated.The basic tool we use is the ray theory. First, the appropriate free-surface condition is shown. Then, the standard ray method, well-known in geometric optics, is formulated in the fluid region and at the free surface. After an elimination process the eiconal equation and the transport equation are obtained. The characteristic equation for the nonlinear eiconal equation is derived, keeping in mind that the characteristics are not perpendicular to the wave fronts, due to the effect of the double-body potential due to the forward speed of the ship, which is assumed to be a good approximation for the steady potential.Numerical computations are carried out by means of the RK4 method to obtain the ray pattern. After some manipulations the amplitude may be computed just as well. Finally, the nonlinear added-resistance force is calculated. Pictures of ray patterns for several angles of incidence are shown. Also the forces are shown.     

Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry     

Nucleation of solidification in liquid droplets

Analytical and numerical methods have been developed to analyze the solidification kinetics of a mass of liquid droplets dispersed in a fluid or solid matrix using classical nucleation theory. The resulting analytical expressions and numerical calculations can be compared directly with calorimetric measurements of the droplet solidification exotherms to obtain information about the nucleation mechanism. With increasing contact angle at the solid-liquid-matrix triple point, the solidification onset, peak, and end temperatures and exothermic peak height all decrease sharply and the droplet solidification exotherms become broader. Decreasing either the droplet radius or the number of potential catalytic nucleation sites produces a similar but smaller effect. Distributions in droplet radius, contact angle, and nucleation sites have no effect on the solidification peak temperature, but the droplet solidification exotherms become broader and more symmetric. The solidification onset temperature is independent of cooling rate in the calorimeter, but the solidification peak and end temperatures decrease and the exothermic peak height increases with increasing cooling rate. Predicted droplet solidification exotherms are in excellent agreement with detailed experimental measurements on 10-nm-radius Cd droplets embedded in a solid Al matrix. Analytical predictions give best-fit values of 43 deg and 430 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively; numerical predictions give best-fit values of 43 deg and 750 for the contact angle and the number of potential catalytic nucleation sites per droplet, respectively.     

Materials technology for aerospace applications

Modern helicopter design depends on the successful combination of materials to fulfil a very wide range of critical functions. In the past few years demands from the aerospace industry have caused considerable enhancement in the favourable properties of both polymer based materials and metals. These are discussed in connection with the progressive technical evolution of helicopters and other advanced technological products from the Westland Group.     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

Empirical equations for the perforation of mild steel plates

The experimental results for the perforation energy of mild steel plate struck by flat-ended, non-deforming, cylindrical penetrators have been correlated using the principles of dimensional analysis. A correlation is presented for long penetrators. It is shown that for short penetrators a different response of the target is observed and that, at present, there are insufficient published data to produce a unifying correlation.     

Optimal power control for Rayleigh-faded multiuser systems with outage constraints

How can we achieve the conflicting goals of reduced transmission power and increased capacity in a wireless network, without attempting to follow the instantaneous state of a fading channel? In this paper, we address this problem by jointly considering power control and multiuser detection (MUD) with outage-probability constraints in a Rayleigh fast-fading environment. The resulting power-control algorithms (PCAs) utilize the statistics of the channel and operate on a much slower timescale than traditional schemes. We propose an optimal iterative solution that is conceptually simple and finds the minimum sum power of all users while meeting their outage targets. Using a derived bound on outage probability, we introduce a mapping from outage to average signal-to-interference ratio (SIR) constraints. This allows us to propose a suboptimal iterative scheme that is a variation of an existing solution to a joint power control and MUD problem involving SIR constraints. We further use a recent result that transforms complex SIR expressions into a compact and decoupled form, to develop a noniterative and computationally inexpensive PCA for large systems of users. Simulation results are presented showing the closeness of the optimal and mapped schemes, speed of convergence, and performance comparisons.     

Comparison of nutrient cycling in a surface-flow constructed wetland and in a facultative pond treating secondary effluent.

There is a growing interest in the possibilities offered by combinations of waste stabilisation ponds (WSP) and constructed wetlands (CW). The purpose of our study was to compare treatment performances and nutrient cycling in a surface-flow wetland (SFW) and in a WSP treating secondary effluent. In the period between 2000 and 2003, a pilot SFW and a pilot WSP were constructed at the outlet of the wastewater treatment plant and their performance monitored while both were active under the same conditions. The SFW was planted with Phragmites australis and Eichhornia crassipes, while in the WSP development of algae was spontaneous. Performance efficiency was monitored by means of evaluation of physical and chemical parameters in water, by measurement of plant productivity and by analysis of N and P contents in biomass. The SFW with macrophytes proved more efficient in decreasing the suspended solids (64.6%), settleable solids (91.8%), organic N (59.3%), total N (38%), COD (67.2%) and BOD5 (72.1%) than the WSP. The WSP with algae was more efficient in treatment of ammonia nitrogen (48.9%) and ortho-phosphate (43.9%). The results of this study provide data that are of help in optimising combinations of SFW and WSP.     

Compact implementation of high-performance CMOS current mirror

A high-performance compact current mirror implementation with very low input resistance, very high output resistance, high copying accuracy, low input and output voltage supply requirements and high bandwidth is proposed. The circuit characteristics are validated with simulations in 0.5 /spl mu/m CMOS technology and with experimental results.