Slowly moving hull forms in short waves

The purpose of this paper is to provide a mathematical tool to improve the optimal design of ship forms. It is common practice that hull forms are designed such that they have minimum wave resistance in calm water. In this paper a theory is described by which the effect of short waves may be incorporated.The basic tool we use is the ray theory. First, the appropriate free-surface condition is shown. Then, the standard ray method, well-known in geometric optics, is formulated in the fluid region and at the free surface. After an elimination process the eiconal equation and the transport equation are obtained. The characteristic equation for the nonlinear eiconal equation is derived, keeping in mind that the characteristics are not perpendicular to the wave fronts, due to the effect of the double-body potential due to the forward speed of the ship, which is assumed to be a good approximation for the steady potential.Numerical computations are carried out by means of the RK4 method to obtain the ray pattern. After some manipulations the amplitude may be computed just as well. Finally, the nonlinear added-resistance force is calculated. Pictures of ray patterns for several angles of incidence are shown. Also the forces are shown.     

Comparison between photocatalytic ozonation and other oxidation processes for the removal of phenols from water

Photocatalytic ozonation (1O₃ + VUV + TiO₂), ozonation (O₃), catalytic ozonation (O₃ + TiO₂), ozone photolysis (O₃ + VUV), photocatalysis (TiO₂ + VUV) and photolysis (VUV) have been compared in terms of formation of intermediates, extent of, mineralization (TOC, COD, chloride, nitrate) and kinetics in the aqueous treatment of three phenols (phenol, p‐chlorophenol and p‐nitrophenol). In all cases, photocatalytic ozonation led to lower degradation times for chemical oxygen demand and total organic carbon removal. Intermediates formed were similar in the different oxidation systems with some exceptions. They can be classified into three different types: polyphenols (resorcinol, catechol, hydroquinone), unsaturated carboxylic acids (maleic and fumaric acids) and saturated carboxylic acids (glyoxylic, formic and oxalic acids). First order kinetic equations have been checked for the oxidation processes studied in the case of the parent compound. Rate constants of these systems have also been calculated. Copyright © 2005 Society of Chemical Industry     

Modelling and analysis of 3-D arrangements of particles by point processes with examples of application to biological data obtained by confocal scanning light microscopy

Within the concept of point processes, a review is presented of quantities which can be used in studies of three-dimensional (3-D) aggregates of particles. Suitable characteristics and estimators are given for both unmarked and marked point processes. To demonstrate the feasibility of such quantitative approaches, an application in histology, dealing with 3-D arrangements of cell nuclei in rat liver, is described. Using a confocal scanning light microscope, 3-D images are recorded and image analysis used to obtain the coordinates of the centroid, together with the volume and DNA content, of each cell nucleus. Examples of results are given, using both unmarked and marked point processes. In the latter case, cell type, nuclear volume and ploidy group are suitable marks.     

Empirical equations for the perforation of mild steel plates

The experimental results for the perforation energy of mild steel plate struck by flat-ended, non-deforming, cylindrical penetrators have been correlated using the principles of dimensional analysis. A correlation is presented for long penetrators. It is shown that for short penetrators a different response of the target is observed and that, at present, there are insufficient published data to produce a unifying correlation.     

Optimal power control for Rayleigh-faded multiuser systems with outage constraints

How can we achieve the conflicting goals of reduced transmission power and increased capacity in a wireless network, without attempting to follow the instantaneous state of a fading channel? In this paper, we address this problem by jointly considering power control and multiuser detection (MUD) with outage-probability constraints in a Rayleigh fast-fading environment. The resulting power-control algorithms (PCAs) utilize the statistics of the channel and operate on a much slower timescale than traditional schemes. We propose an optimal iterative solution that is conceptually simple and finds the minimum sum power of all users while meeting their outage targets. Using a derived bound on outage probability, we introduce a mapping from outage to average signal-to-interference ratio (SIR) constraints. This allows us to propose a suboptimal iterative scheme that is a variation of an existing solution to a joint power control and MUD problem involving SIR constraints. We further use a recent result that transforms complex SIR expressions into a compact and decoupled form, to develop a noniterative and computationally inexpensive PCA for large systems of users. Simulation results are presented showing the closeness of the optimal and mapped schemes, speed of convergence, and performance comparisons.     

Compact implementation of high-performance CMOS current mirror

A high-performance compact current mirror implementation with very low input resistance, very high output resistance, high copying accuracy, low input and output voltage supply requirements and high bandwidth is proposed. The circuit characteristics are validated with simulations in 0.5 /spl mu/m CMOS technology and with experimental results.     

Architecture and algorithms for tracking football players with multiple cameras

A system architecture and method for tracking people is presented for a sports application. The system input is video data from static cameras with overlapping fields-of-view at a football stadium. The output is the real-world, real-time positions of football players during a match. The system comprises two processing stages, operating on data from first a single camera and then multiple cameras. The organisation of processing is designed to achieve sufficient synchronisation between cameras, using a request-response pattern, invoked by the second stage multi-camera tracker. The single-view processing includes change detection against an adaptive background and image-plane tracking to improve the reliability of measurements of occluded players. The multiview process uses Kalman trackers to model the player position and velocity, to which the multiple measurements input from the single-view stage are associated. Results are demonstrated on real data.     

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

Silver and copper nanowires have been synthesized using a scalable method of AC electrodeposition into porous aluminum oxide templates, which produces gram quantities of metal nanowires ca. 25 nm in diameter and up to 5 and 10 μm in length for Ag and Cu, respectively. The nanowires have been used to prepare polystyrene nanocomposites by solution processing. Electrical resistivity measurements performed on polymer nanocomposites containing different volume fractions of metal indicate that low percolation thresholds of nanowires are attained between compositions of 0.25 and 0.75 vol %.     

Improve the quality of vaginal delivery]

Between 1990 and 1992, external sphincter repair was performed in 20 patients rendered faecally incontinent after earlier fistula surgery. All were improved, 13 (65%) achieving Grade 1 or 2 continence. Postoperative ultrasound was useful in explaining the sub-optimal outcome of 3 patients who still had defects. Clinical outcome in female patients was better than in male patients. Clinical outcome was not related to the results of preoperative manometry, the site of external sphincter damage, the use of a stoma, or the occurrence of wound complications. External sphincter repair for faecal incontinence after fistula surgery achieves good results in the majority of patients.     

Modulation of cAMP-dependent protein kinase by derivatives of chondroitin sulfate

Here, we report investigations about the direct effect of glycosaminoglycans, such as dermatan sulfate, chondroitin 4- and 6-sulfate upon cAMP-dependent protein kinase activity. The results indicate that glycosaminoglycans strongly influence the phosphorylation activity of this enzyme against histone type IIa and [Val6, Ala7]-kemptide. While chondroitin 4-sulfate and dermatan sulfate exhibit inhibitory effects, chondroitin 6-sulfate shows a stimulating effect. In addition, the chondroitin 6-sulfate is also able to reduce the chondroitin 4-sulfate and dermatan sulfate specific inhibition.