Impact of the River Maine Drainage Scheme on Hydro-Power Generation

A comparison is made between pre- and post-drainage scheme river flows recorded on the River Maine, Co. Antrim. A method of using five-year reference periods has been applied to the mean daily flows to smooth and eliminate, as far as possible, variations due to climatic changes.
Any loss of energy production which might have been due to changes in river flow was examined for turbine installations at a factory at Cullybackey. The quantities of usable water, and hence potential energy production, were calculated for each of the post-scheme five-year periods and compared with a pre-scheme five-year reference period. Any potential loss was then represented by a depreciation factor. It was found that no measurable loss of potential energy production has occurred on the River Maine in the post-scheme period.     

Wind loads on attached canopies and their effect on the pressure distribution over arch-roof industrial buildings

Arch-roof industrial buildings are very wind sensitive. The current aerodynamic coefficients in wind codes do not contemplate the possibility of existence of canopies attached to the buildings. This paper presents the results of an investigation on the influence exerted by canopies on the static wind actions on arch-roof industrial buildings. Six scale models of these arch-roof buildings were tested, with five types of canopies attached. Three of these canopies were instrumented and the static wind pressures were measured. The tests were done at the boundary layer wind tunnel of the Universidade Federal do Rio Grande do Sul. The results show that the aerodynamic coefficients for the roof are not affected by the canopies, in the case of axial incidence. However, the influence on the pressure distribution is noticeable for wind incidence perpendicular to the main axis of the arch roofs and for other incidences as well. This influence is discussed in the paper. The aerodynamic coefficients for the design of the arch-roofs, with and without the attached canopies are given. Aerodynamic coefficients for design of the canopies are also suggested. Furthermore, the paper discusses the relation between the magnitude of the canopy design forces and the canopy width, as well as the relation between the canopy height location and the height of the building wall. The results were compared with design recommendations from previous work of Jancauskas and Holmes (in: US National Conference on Wind Engineering, Proceedings, Texas Tech University, Lubbock, 1985) and Jancauskas and Eddleston (in: International Conference on Wind Engineering, Fotodruck J. Mainz, Aachen, 1987).     

Arsenic and heavy metals in soils associated with regional geochemical anomalies in South-West England

Regional geochemical maps have shown extensive anomalies of arsenic, copper and other heavy metals in those parts of South-West England associated with mineralised zones around the granite intrusion. Studies in the vicinity of the River Tamar and of the metamorphic aureole around Dartmoor have confirmed significantly higher concentrations of arsenic and heavy metals in soils contaminated by mining, smelting and mineralisation compared with those from nearby control areas. Arsenic and copper show the greatest degree of enhancement ranging up to 900 ppm As and 2000 ppm Cu in both alluvial and upland topsoils within the Tamar area. Preliminary analyses indicate that the trace metal content of pasture herbage-reflects in part the degree of soil contamination. Maximum concentrations of 35 ppm As and 22 ppm Cu in autumn sampled herbage were found at contaminated sites compared with mean values of less than 0.5 ppm As and 8 ppm Cu in control areas. Geochemical reconnaissance surveys based on stream sediment sampling provide a useful indication of areas wherein widescale soil contamination may occur.     

The creation of the incapable social tenant in Flanders,Belgium. An appraisal

As long as the social rented sector housed traditional families and the allocation procedures were rather loose, there was little commotion about the sector. A combination of a change in family structures, economic changes, and the strengthening of allocation procedures in favour of those most in need did change perceptions. Marginalisation and ghettoisation, especially of high-rise social housing estates, became buzzwords. This paper deals with the causes of these changes and with their implications. The marginalisation discourse calls for enlarging the target groups and estate-specific allocation procedures (to obtain a `social mix'). It illustrates a profound desire to diminish the number of ethnic minorities, single parents, single-person households and all kinds of people with a weak income profile who gain access to social rental housing. Furthermore, this discourse is reaching a crescendo: after it was started in the early 1990s by staff members of local social housing companies, it passed through the union of the social housing companies, the umbrella organisation of the sector, and parliament, reaching its greatest momentum so far in early 2002 when it was adopted by the Flemish housing minister. The counterpoint to this negative discourse is the high degree of satisfaction among social tenants, as observed in a study carried out in 1999. In our paper we will try to explain the background of these opposing trends and the possible consequences for the social rental housing in general and for tenants in particular.     

The potential use of <Emphasis Type="Italic">Fabaceae</Emphasis> lianas fibers in papermaking

The objective of this study was to anatomically characterize the fibers of nine species of Fabaceae lianas, to determine their potential in papermaking and to define which biometric parameters can be used to distinguish and identify individuals. The species presented average values of 76.81, 57.45, 42.55, and 1.81 for the felting index, wall fraction, coefficient of flexibility, and Runkel index, respectively. It is concluded that only M. ferox and M. madeirense can be recommended for papermaking.     

The impact of natural and artificial weathering on the visual,colour and structural changes of seven tropical woods

This study investigates the effects of wood weathering on changes in its macroscopic and colour characteristics in connection with changes in its molecular and anatomical structure. Seven hardwoods suitable for outdoor architecture—bangkirai, cumaru, cumaru rosa, ipé, jatobá, kusia, and massaranduba—were exposed to the exterior out of ground contact for 1–36 months according to EN 927-3, and for 1–12 weeks in Xenotest with water spraying according to partly modified EN 927-6. With prolonged weathering, the following changes occurred in the top surfaces of all tropical woods: (1) visual—creation of longitudinal macro-cracks, (2) spectrophotometry and CIE-L ^? a ^? b ^? —darkening in exterior exposure mainly due to pollutants, except for ipé, and vice versa lightening in Xenotest, as well as greening and blueing in both modes of exposure, (3) FTIR—faster decrease of guaiacyl than syringyl lignin, absolute decrease of conjugated and unconjugated carbonyl groups in the newly formed lignin-polysaccharide-extractive substrate in the photo-oxidized and washed-out cell walls, and decrease of cellulose crystallinity, (4) SEM—damaging of cell-walls by micro-cracks, and their degradation by thinning. Connections between changes of the individual characteristics of weathered woods, for example, between the colour (ΔE*, etc.) and the molecular structure (carbonyls, etc.), were also determined.     

Characteristics of cricket (<Emphasis Type="Italic">Gryllus bimaculatus</Emphasis>) chitosan and chitosan-based nanoparticles

The field cricket (Gryllus bimaculatus) is commonly consumed as food in different parts of the world. This study was performed to characterize the chitosan extracted from crickets and to assess its potential use to the growing functional market. The degree of deacetylation (DA), Fourier-transform infrared spectra, X-ray diffraction patterns, molecular mass, scanning electron microscopy spectra, and color were measured. Cricket chitosan nanoparticles were prepared, and the optimal conditions were identified. The molecular mass of the cricket chitosan was lower than that of commercial chitosan; however, the DA, FTIR, and XRD spectra were similar. The particle size (208.27 ± 3.47 nm), zeta potential (35.72 ± 1.29 mV), and polydispersity index (PDI: 0.27 ± 0.03) of the cricket chitosan NPs were superior to the commercial. Addition of NaCl reduced the cricket chitosan NPs size up to 15.5%. This finding is a novel trial to prove the availability of the insect chitosan with a low molecular mass as an active carrier source.     

The centralization index: A measure of local spatial segregation

Segregated areas may occur around an attractive park or a waste incinerator, but the magnitude and group membership of the people in closest proximity will likely be difierent. We therefore introduce a local segregation measure that can be applied to any location within a metropolitan area, and that can identify the group that is relatively more concentrated around that reference location. We further introduce an inference approach to identify the statistical significance of a particular segregation value. In an exploratory setting the index can be used to generate a map of hot spots, and seed the question: “why is this group significantly concentrated around that location?”     

A hybrid approach to detect crack parameters using measured natural frequencies in thin walled angle section steel beams

Present study outlines a hybrid approach using Finite Element Method (FEM)–Response Surface Method (RSM)–Genetic Algorithm (GA) to predict the crack parameters, namely crack position and crack depth ratio with the help of only the measured natural frequencies of cracked thin walled beams. Numerical experimental trials of cracked beams have been conducted based on design of experiment (DOE) approach using an improved Finite element model. The improvement has been achieved by consideration of warping stiffness in cracked angle section beam. Thereafter, regression analysis has been conducted to construct Response Surface Function (RSF). Optimum crack parameters were then calculated using GA by minimizing an objective function which has been formed as the root mean square (RMS) of the residuals between RSFs and measured frequencies. Results of the study indicate that, the proposed approach performs with excellent accuracy and it does not require the response of an uncracked beam as benchmark information.