离子束混合工艺对材料抗蚀性能的影响

本文介绍了离子束混合工艺方法。与直接注入相比较,离子束混合所使用的设备造价低1/4—1/2,而生产效率可提高1—2个数量级,因而使生产成本大幅度降低,这无疑对离子束工艺的实际应用将产生巨大的促进作用。 通过对轴承材料(GCr15和Cr4Mo4V)经Cr、N、Ta不同元素的混合处理后,在0.5M H_2SO_4和0.1M NaCl的缓冲溶液中的阳极极化曲线表明经混合处理后的两种材料试样,其抗蚀能力和抗点蚀能力均大大提高,这与直接注入的试样效果是一致的。 通过俄歇谱仪和透射电镜的分析结果表明混合是成功的,且在一定的条件下,形成非晶组织。 本文的结论是,无论是离子的直接注入还是离子束混合,对提高轴承材料的抗腐蚀性能都是有效的方法,特别是离子束混合技术具有更大的应用前景。     

GaN材料系列的研究进展

ＧａＮ及其合金作为第三代半导体材料具有一系列优异的物理和化学性质，在光电子器件，高温大功率电子器件及高频微波器件应用方面具有广阔的前景，已成为当前高科技领域的研究重点，论述了这种材料的研究历史与发展现状，物理与化学性质，薄膜的生长方法及在光学电子和微电子器件应用于方面的研究进展。     

职工医院中青年技术人才流失问题及对策

文章对职工医院中青年技术人才流失的现象进行了剖析，指出了职工医院中青年技术人才流失的原因，提出解决人才流失的对策。     

^60Coγ射线对刚地弓形虫缓殖子感染性的影响

应用不同剂量的~(60)Coγ射线照射含NT株弓形虫包囊的鼠脑匀浆后,以0.4％胰蛋白酶液消化,使弓形虫缓殖子从包囊中释放出来,并用生理盐水作连续10倍稀释,使成为含不同数量缓殖子的悬液,将此悬液接种小鼠,用生物检测方法确定其感染性。另设未经照射处理的缓殖子悬液感染小鼠的对照组。结果表明,γ射线0.55kGy剂量为控制鼠脑中NT株弓形虫感染性的最小有效剂量。γ射线0.1kGy剂量对弓形虫缓殖子感染性无明显影响,而0.45kGy照射后,其感染性较前者下降了10~4倍。     

Non-steady-state model for kinetics of free radical polymerization, 4. Direct thermal initiation

This paper deals with the non-steady-state kinetics of direct thermal initiated polymerization. The initiation is assumed to be a bimolecular reaction of the monomer. The relationship between the radical concentration and the monomer conversion is rigorously derived. In further treatment a few very close approximations are introduced based on the fact that the number of monomer molecules reacting in the initiation step is much less than that consumed in the propagation step for a process producing high polymer, and the value of the rate constant for propagation or chain transfer is much lower than that for chain termination. Expressions for various molecular parameters, such as molecular weight distribution, number-average and weight-average degrees of polymerization, and dispersity, are given. Several numerical examples are provided.     

Nitrone spin-traps block calcium channels and induce pulmonary artery relaxation independent of free radicals

Free radicals react with nitrones to form stable nitroxides which can be identified by ESR spectroscopy. Unfortunately, little is known regarding the pharmacological properties of these compounds. In this study, three commonly used nitrones, 5,5-dimethylpyrroline-N-oxide (DMPO), alpha-phenyl-tert-butylnitrone (PBN), and alpha-(4-pyridyl 1-oxide)-N-tert-butylnitrone (POBN), were found to induce relaxation of preconstricted isolated rat pulmonary artery rings. Additional experiments with PBN indicated that vasorelaxation could not be attributed to production of endothelial derived factors, prostaglandins, or free radicals. Patch-clamp techniques revealed reversible calcium channel blockade with PBN at a concentration below that needed to detect free radicals. Calcium channel blockade probably accounts for the vasorelaxation observed in the isolated ring preparations described here, and should be considered when using nitrone spin-traps both in in vivo and clinical studies.     

混合集成电路激光功能调值技术

本文提出了激光功能微调技术在高精度混合集成电路上的应用，讨论了关键技术问题，并以实例具体说明。该技术的应用为研制高精度混合集成电路开辟了新途径。     

努力攀登科技高峰 为把石化工业建成支柱产业多做贡献

概述中国石化总公司成立以来所取得的重大科技成果。     

The preparation and magnetic properties of Fe-Ag granular solid using a sol-gel method

The Fe-Ag granular metal solid samples with 10% and 30% weight iron have been successfully fabricated using a sol-gel method, which are characterized by X-ray diffraction and transmission electron micrography. The average diameters of iron particles are from about a few nanometres to a few tens of nanometres controlled by the reducing temperature. The evolution of magnetic properties and microstructure during heat treating are described in detail and explained by using the superparamagnetism, single domain and multi domain theories. The magnetic anisotropy of the Fe-Ag granular solid is studied by using the law of approach to saturation. It is found that the magnetic anisotropy constant is in the order of 10⁵ J m^–3 which is higher than the value of the bulk iron and increases with the increase of reducing temperature.     

The geometry effects for stress intensity factor of sandwich specimen for measuring interfacial fracture toughness

The interfacial stress intensity factors for three types of sandwich specimens: the single edge crack tensile specimen, the three point bend specimen and the four point shear specimen were obtained by the finite element analysis and compared with the asymptotic solutions. The results show that the geometric effect for mode II specimen is larger than mode I specimen. The limit curves for geometry factor equal to 1.05 were obtained to indicate the usable range of validity of the asymptotic solution.