铸件曲面及其模型曲面逆向工程并行设计技术

研究目的是通过逆向工程方法实现铸件曲面及其模型曲面的并行设计。已知与铸件安装配合的曲面数据及铸件各截面厚度,确定铸件的加工变形和加工余量后,分别求出铸件曲面和模型曲面的离散有序数据作为神经网络的样本数据。建立RBF神经网络拓扑结构,利用神经网络拟合铸件曲面和模型曲面,实现两种曲面的并行设计,曲面精度高,计算速度快。通过实例证明该方法可以实现曲面的并行设计,缩短研制和设计周期,提高效率。     

Fluorescence enhancement and cofluorescence in complexes of terbium(III) with trimellitic acid

1. Introduction Rare earth elements have an important function inlife process. The fluorescence enhancement of lan-thanides in aqueous solutions has therefore becomean area of active study in trace-level estimation oflanthanides using spectrofluorimetry [1]. Its possiblemechanism and application as fluorescence probesin biological systems have also attracted attention inrecent years [2]. Generally, fluorescence enhance-ment can be achieved through ligand sensitization.Various ligands have bee…     

数控机床远程故障诊断技术研究

本文介绍了数控机床远程故障诊断系统的结构与功能,论述了系统的构成、实现方法以及所涉及的主要技术。     

Fluorescence enhancement and cofluorescence in complexes of terbium(Ⅲ) with trimellitic acid

The fluorescence of terbium (Ⅲ) was enhanced by about three orders of magnitude in the presence of trimellitic acid (benzene-l, 2, 4-tricarboxylic acid (TLA)) in aqueous solution at pH 6. The fluorescence intensity could be greatly increased when the system of Tb3+-TLA was treated with La3+ (or Gd3+) and TritonX- 100. The addition of La3+ (or Gd3+) enhances the fluorescence of the system by about two orders of magnitude due to cofluorescence, and the TritonX-100 micellar medium plays an important role for stabilization of the system. Both the intermolecular energy transfer mode and intramolecular energy transfer mode are responsible for the mechanism of fluorescence enhancement. In the optimum conditions, the fluorescence intensity is a linear function of Tb3+ concentration in the range of 7.8 × 10-9-3.6 × 10-6 mol/L for the system Tb3+-La3+-TLA and 1.0 × 10-8-4.7 × 10-6 mol/L for the system Tb3+-Gd3+-TLA, and the limits of detection are 4.6 ×10-10 mol/L and 6.0 × 10-10 mol/L, respectively.     

200kA预焙槽强化电流过程中发生电解质粘度增加的实践探讨

通过分析200kA预焙槽在强化电流条件下电解质粘度增大的原因及对电解生产的影响,提出了规范电解生产作业制度及处理电解质粘度过大的建议,以实现降低工人劳动强度,达到工艺参数优化和提高电流效率的目的。     

加电弧推力的多功能逆变焊机

通过控制电路的巧妙设计改变弧焊电源外特性（即静特性），给出了多功能焊机手工焊接时加电弧推力的一种方法及其电路原理。     

K/Na-RE复合变质对辊环用高速钢组织及力学性能的影响

在辊环用高速钢中添加不同含量的K／Na-RE复合变质剂，对试样分别进行HSVM及力学性能测试。结果表明，随着复合变质剂含量的增加，并进行适当的热处理，高速钢中铸态碳化物趋于断网，奥氏体晶粒急剧变小，由大的枝晶变为小的等轴晶，分布趋于均匀，且高速钢的强度和韧性明显提高。当复合变质剂的加入量为1．0％时，高速钢的组织及力学性能较好。     

钛合金的表面渗氧强化研究进展

一种简单而有效的被称之为钛合金表面渗氧强化处理的技术在最近几年得到发展。介绍了渗氧强化机理及几种渗氧强化处理技术,包括氧扩散（OD）、热氧化（TO）等离子体渗氧和激光渗氧;最后对渗氧强化处理的前景作了展望。     

液压流体脉动主动控制研究现状与展望

液压流体脉动对液压系统的性能与可靠性影响很大。为了减小甚至消除液压流体脉动,各国学者在这方面做了大量工作,提出了各种主动及被动消振策略,取得了很好的消振效果。本文介绍液压流体脉动产生机理及危害、主动消振策略、目前的研究现状以及主要控制算法,提出了可能的研究方向,并对应用前景进行展望。     

Laser Cladding of an Al-11.7Wt%Si Alloy on ZM5 Magnesium Alloy to Enhance the Corrosion Resistance

MG and its alloys are widely used in aerospace andautomotive in industry.Its poor corrosion resistancerestricts application of Mg alloy.Laser cladding andlaser surface melting are advantageous processes forimprovement of the corrosion resistance of themagnesium alloy[1-2].In the present study,lasercladding of an Al-11.7Wt%Si alloy with two differentthickness on ZM5die cast alloy was performed withCC>2laser with different powder thickness.1.Experimental ProcedureDie cast plates of ZM5Mg a…