Galanin Receptors (GalR1, GalR2, and GalR3) Expression in Colorectal Cancer Tissue and Correlations to the Overall Survival and Poor Prognosis of CRC Patients

Colorectal cancer (CRC) is the second most common cause of cancer in women and the third in men. The postoperative pathomorphological evaluation of patients with CRC is extremely important for future therapeutic decisions. Although our previous studies demonstrated high galanin (GAL) presence within tumor tissue and an elevated concentration of GAL in the serum of CRC patients, to date, there is a lack of data regarding GAL receptor (GalR) protein expression in CRC cells. Therefore, the aim of this study was to evaluate the presence of all three types of GalRs (GalR1, GalR2 and GalR3) within epithelial cells of the human colon and CRC tissue with the use of the immunohistochemical method and to correlate the results with the clinical-pathological data. We found stronger immunoreactivity of GalR1 and GalR3 in CRC cells compared to epithelial cells of the unchanged mucosa of the large intestine. No differences in the GalR2 protein immunoreactivity between the studied tissues were noted. We also found that the increased immunoexpression of the GalR3 in CRC tissue correlated with the better prognosis and longer survival (p < 0.0079) of CRC patients (n = 55). The obtained results suggest that GalR3 may play the role of a prognostic factor for CRC patients. Based on data from the TCGA-COAD project deposited in the GDC Data Portal, we also found that GalR mRNA in cancer samples and the adjacent normal tissue did not correlate with immunoexpression of the GalR proteins in CRC cells and epithelial cells of the unchanged mucosa.     

Investigating the Potential Use of Chemical Biopsy Devices to Characterize Brain Tumor Lipidomes

The development of a fast and accurate intraoperative method that enables the differentiation and stratification of cancerous lesions is still a challenging problem in laboratory medicine. Therefore, it is important to find and optimize a simple and effective analytical method of enabling the selection of distinctive metabolites. This study aims to assess the usefulness of solid-phase microextraction (SPME) probes as a sampling method for the lipidomic analysis of brain tumors. To this end, SPME was applied to sample brain tumors immediately after excision, followed by lipidomic analysis via liquid chromatography-high resolution mass spectrometry (LC-HRMS). The results showed that long fibers were a good option for extracting analytes from an entire lesion to obtain an average lipidomic profile. Moreover, significant differences between tumors of different histological origin were observed. In-depth investigation of the glioma samples revealed that malignancy grade and isocitrate dehydrogenase (IDH) mutation status impact the lipidomic composition of the tumor, whereas 1p/19q co-deletion did not appear to alter the lipid profile. This first on-site lipidomic analysis of intact tumors proved that chemical biopsy with SPME is a promising tool for the simple and fast extraction of lipid markers in neurooncology.     

Study of the reaction of cokes with KOH under nitrogen

Five cokes of increasing content of anisotropic carbon were prepared. Polished surfaces of these cokes were characterized by optical microscopy in terms of components of optical texture. These surfaces were reacted with KOH at 873, 1073 and 1273 K in an inert atmosphere for 2 h and the resultant topography monitored by scanning electron microscopy (SEM). The extent of potassium take-up by coke particles was measured and the diffusion of potassium was detected by EDAX. Microstrength testing was made on the cokes before and after reaction with the alkali. Coke reactivity measurements were obtained for untreated and treated cokes. Results indicate that in an inert atmosphere the alkali reacts preferentially on the prismatic edges of anisotropic carbon and that the rates of reaction increase with increasing temperature. Potassium is able to diffuse into the interior of the more anisotropic coke particles and this casues weakening of the coke. The reactivity measurements indicate that for the more anisotropic cokes the effect of potassium as a catalyst in the solution-loss reaction is more pronounced than for the least anisotropic coke. These conclusions suggest that metallurgical coke in the blast furnace in the presence of alkali materials can lose strength by direct reaction over and above considerations of gasification processes.     

Functional Properties of Gelatin/Polyvinyl Alcohol Films Containing Black Cumin Cake Extract and Zinc Oxide Nanoparticles Produced via Casting Technique

This study aimed to develop and characterize gelatin/polyvinyl alcohol (G/PVA) films loaded with black cumin cake extract (BCCE) and zinc oxide nanoparticles (ZnONPs). The BCCE was also applied for the green synthesis of ZnONPs with an average size of less than 100 nm. The active films were produced by a solvent-casting technique, and their physicochemical and antibacterial properties were investigated. Supplementation of G/PVA film in ZnONPs decreased the tensile strength (TS) from 2.97 MPa to 1.69 MPa. The addition of BCCE and ZnONPs increased the elongation at the break (EAB) of the enriched film by about 3%. The G/PVA/BCCE/ZnONPs film revealed the lowest water vapor permeability (WVP = 1.14 × 10⁻⁹ g·mm·Pa⁻¹·h⁻¹·mm⁻²) and the highest opacity (3.41 mm⁻¹). The QUick, Easy, New, CHEap and Reproducible (QUENCHER) methodologies using 2,2-diphenyl-1-picrylhydrazyl (DPPH), 2,2′-azino-bis(3-ethylbenzothiazoline-6- sulfonic acid) (ABTS) and cupric ion reducing antioxidant capacity (CUPRAC) were applied to measure antioxidant capacity (AC) of the prepared films. The incorporation of BCCE and ZnONPs into G/PVA films enhanced the AC by 8–144%. The films containing ZnONPs and a mixture of BCCE and ZnONPs inhibited the growth of three Gram-positive bacterial strains. These nanocomposite films with desired functional properties can be recommended to inhibit microbial spoilage and oxidative rancidity of packaged food.     

Seed Quantity or Quality?—Reproductive Responses of Females of Two Dioecious Woody Species to Long-Term Fertilisation

Although seed quality and quantity, as well as reproductive performance are important life history stages of plants, little is known about the reproductive responses of trees to environmental changes such as increased anthropogenic deposition of nitrogen (N) and phosphorus (P). Dioecious plants are good models with which to test the environmental impact on female or male reproductive responses individually. We analysed effects of different long-term nutritional availability on the reproductive performance of two dioecious species (Taxus baccata L. and Juniperus communis L.) characterised by different life histories. By using pot experiments with vegetatively propagated plants grown in different fertilisation conditions, we observed an increase in plant growth and strobili production but a decrease in seed efficiency. Seeds produced by fertilised plants had greater seed mass. Fertiliser addition did not change C or N content nor the C/N ratio of T. baccata seeds, but increased N content and the N/P ratio; however, it did lower the C/N ratio in J. communis. Fertilisation did not change the metabolite profile in T. baccata but 18 metabolites were changed in J. communis. The study revealed new links between species life history, environmental changes, and reproduction. The findings imply that future environmental conditions may alter both seed productivity, and quality, as well as plant reproductive behaviour.     

The Numerical Comparison of Heat Transfer in a Coated and Fixed Bed of an Adsorption Chiller

Ecological adsorption technology is becoming a focus of attention by industry due to the utilization of low grade thermal energy sources for cooling production. It can be a promising part of sustainable development concept of the global economy. Therefore, research aiming at improving their performance i.e. Coefficient of Performance (COP) by optimizing the construction of sorption beds with a built in heat exchanger system is crucial. The heat transfer characteristics between the bed of porous media (sorbent) and surface of the heat exchanger system determine the heating power of an adsorption chiller. The HP increase can be obtained by heat transfer intensification due to the increase in the thermal conductivity of the sorbent layer in the vicinity of the heat exchanger’s surface. The novel modification of the sorbent layer structure is proposed in the paper in order to improve the heat transfer processes in the heat exchanger boundary layer. The analysis of desorption process conditions in the parametric model of a coated and fixed adsorption bed design is presented in the paper. The computational fluid dynamics (CFD) with conjugate heat transfer analysis is used to determine the crucial input parameters (temperature distribution in the sorbent bed) for further analytical calculations. The commercial code Ansys Fluent was used to perform numerical simulations. The developed computational model consisted of three subdomains representing heating water, heat exchanger material (copper) and sorbent (silica gel). The comparison of a novel coated design and a conventional fixed bed is discussed in the paper. The numerical analysis is based on experimental thermal conductivity measurements of the sorbent layer in different configurations, which were performed using Laser Flash Method.     

Evaluation of a pressure head and pressure zones in water distribution systems by artificial neural networks

Neural Computing and Applications - Water distribution system design is inherently associated with hydraulic calculations that require thorough evaluation of obtained results and accuracy of the...