Demagnetization-free longitudinal recording on flexible thin film metal media

The variation of demagnetization effects with media parameters for longitudinal contact recording has been investigated. Co-Re thin film metal media were sputtered onto flexible polyimide substrates. It was found that when the film thickness δ and demagnetizaton parameterB_{r}delta/H_{c}were less than 2 μ inch and 15 μinch, respectively, demagnetization-free longitudinal recording was obtained up to the recording density of 75 KFRPI at the head-to-medium spacing of 3 μ inch. As a result, recording densities of D50over 50 KFRPI were achieved with a 20 μinch gap head. For thicker films with larger demagnetization parameters, i.e.,delta geq 4 muinch andB_{r}delta/H_{c} geq 40 muinch, the longitudinal recording process approached the demagnetization limit. The results show that (with existing head field gradients) improvement in linear density of thin metal media can be obtained by an approximate factor of two before the demagnetization limit is reached.     

Remeshing for metal forming simulations—Part I: Two‐dimensional quadrilateral remeshing

In this paper, a general framework of practical two‐dimensional quadrilateral remeshing, which includes the determination of remeshing time, automatic quadrilateral mesh generation, and data transfer process, will be formulated. In particular, the current work contains new algorithms of mesh density specification according to the distribution of effective strain‐rate gradients, mesh density smoothing by fast Fourier transform (FFT) and low‐pass filtering techniques, coarsening it by node placement scheme, and a modified Laplacian mesh smoothing technique. The efficiency of the developed remeshing scheme was tested through three practical two‐dimensional metal forming simulations. The results clearly indicate that the algorithms proposed in this study make it possible to simulate two‐dimensional metal forming problems efficiently and automatically. Copyright © 2002 John Wiley & Sons, Ltd.     

A systematic approach to analysing errors of commission from diagnosis failure in accident progression

The accident scenarios of a nuclear power plant are composed of an initiating event (IE), additional events/failures and human inappropriate actions, the combinations of which lead to irreversible consequences. In such a dynamic situation, operators should diagnose the occurring events/failures (including an initiating event and additional events) and assess the related situations utilising the available resources such as operating procedures or human–machine systems to control and maintain the plant in a stable condition. The misdiagnosis or diagnosis failure of the occurring events could cause critical human inappropriate actions that aggravate the plant condition, which is termed as errors of commission (EOCs). This paper presents a methodology for analysing the potential for diagnosis failure of the initiating and additional events and the consequent EOC events, based on the operating procedures, in the accident scenarios of nuclear power plants. The method to be presented categorizes the diagnostic situations in the accident scenarios into three cases according to the structure of the emergency operating procedures (EOPs) and the time of the occurring events: (1) the diagnosis of an initiating event, (2) the diagnosis of both an initiating event and an additional event when an additional event occurs prior to the performance of the diagnosis procedure, and (3) the diagnosis of an additional event when an additional events occurs after the performance of the diagnosis procedure. The application of the method is illustrated through three case example scenarios: (1) the power-operated relief valve (PORV) or the pressurizer safety valve (PSV) LOCA, (2) the loss of all feedwater (LOAF) event (loss of main feedwater*loss of auxiliary feedwater), (3) the sequence of<the station blackout (SBO)*loss of turbine-driven (or diesel-driven) auxiliary feedwater*PSV stuck-open*recovery of AC power>.     

A reconfigurable microstrip antenna for switchable polarization

A novel reconfigurable microstrip antenna with switchable polarization sense is proposed. The proposed antenna has a simple structure, consisting of a corner-truncated square radiating patch, four small triangular conductors, and a microstrip line feed. Using independently biased PIN diodes on the patch, it can produce linear polarization, or left- or right-hand circular polarization according to bias voltages. From the measured results, low cross-polarization levels when operated in the linear state and good axial ratios in the circular state are observed.     

Fixed Point Implementation of the QCELP Speech Coder

The Qualcomm code excited linear prediction (QCELP) speech coder was adopted to increase the capacity of the CDMA Mobile System (CMS). In this paper, we implemented the QCELP speech coding algorithm by using TMS320C50 fixed point DSP chip. Also the fixed point simulation was done with C language. The computation complexity of QCELP on TMS320C50 was about 33 MIPS and program size was 10k words and data memory was 4k words. In the normal call test on the CMS, where mobile to mobile call test was done in the bypass mode without double vocoding, mean opinion score for the speech quality was 3.11.     

Enhancement of electron emission efficiency and stability ofmolybdenum-tip field emitter array by diamond like carbon coating

The effect of diamond like carbon (DLC) films, coated by a layer-by-layer technique using PECVD (plasma enhanced chemical vapor deposition) on the electron emission characteristics of molybdenum (Mo)-tip field emitter array (FEA) is examined. The turn-on voltage was lowered from 80 V for the Mo-tip to 65 V for the DLC-coated Mo-tip FEA while the maximum emission current was increased from 140 μA for the Mo-tip to 320 μA for the DLC-coated Mo-tip FEA composed of 900 emitters. For an anode current of 0.1 (μA/emitter) the gate voltage for the DLC-coated Mo-tip FEA and Mo-tip FEA was about 87 and 107 V, respectively. It was also confirmed that the emission current of a DLC-coated Mo-tip FEA was more stable than that of a Mo-tip FEA     

Realization of 2-D Variable IIR Digital Filter Structures with a Small Amount of Calculations for Coefficient Update

This paper proposes 2-D variable IIR digital filter structures with a small amount of calculations for coefficient update. The proposed realization method uses the 2-D parallel allpass structure derived from the separable denominator 2-D filter as the prototype structure for 2-D variable digital filters. In order to reduce the amount of calculations, all the redundant first-order complex allpass sections are combined by modularization of the variable structure. Furthermore, we can realize a very compact variable structure with a minimal number of first-order complex allpass sections by combining complex allpass sections with their complex conjugate allpass sections. Comparison of the calculation loads of the variable structures is presented to demonstrate that the amount of calculations for coefficient update of the proposed variable structure is far less than that of the original and the modular variable structure.     

A new three-level soft-switched converter

A three-level, constant-frequency, isolated converter which employs a coupled inductor to achieve zero-voltage switching of the primary switches in the entire line and load range is described. Because the coupled inductor does not appear as a series inductance in the load current path, it does not cause a loss of duty cycle or severe voltage ringing across the output rectifiers. The operation and performance of the proposed converter was verified on a 1-kW prototype.     

A kinetic study on thermal chlorination of l-chloro-2,2,2-trifluoroethane

HCFC-133a (l-chloro-2,2,2-trifluoroethane) was thermally chlorinated in an integral reactor under atmospheric pressure in a temperature range between 573 and 723 K. From the analysis of the data it was confirmed that the reaction was a two-step series-parallel reaction and each step was a second-order reaction. The ratio of the second-step rate constant to the first-step rate constant did not change with temperature and its value was 1.13. The activation energy was 106 kJ/g-mol. These results indicate that the product distribution is the sole function of conversion of HCFC-133a.