Spectrally stable Er-fiber laser for application in phase-sensitive optical time-domain reflectometry

A high degree of frequency stability in an Er-fiber laser with the Fabry-Perot configuration was achieved using a long (25-km) optical-feedback loop. The frequency-drift rate was determined to be <1 MHz/min by observing temporal fringes in an unbalanced Mach-Zehnder interferometer. Instantaneous linewidth measured with a delayed self-heterodyne interferometer was less than the 3-kHz resolution limit. The laser was utilized in an optical time-domain reflectometry experiment to detect and locate a time-varying phase perturbation applied to an optical fiber.     

Parasitic-aware RF circuit design and optimization

RF circuit synthesis techniques based on particle swarm optimization and adaptive simulated annealing with tunneling are described, and comparisons of parasitic-aware designs of an RF distributed amplifier and a nonlinear power amplifier are presented. Synthesized in 0.35-/spl mu/m digital CMOS using a single 3.3-V power supply, the designs provide an 8-dB gain and 8-GHz bandwidth for a four-stage distributed amplifier, and 1.2-W output power with 55% drain efficiency at 900 MHz for a three-stage power amplifier. A standard circuit simulator, HSPICE or SPECTRE, embedded in an optimization loop is used to evaluate cost functions. The proposed design and optimization methodology is computationally efficient and robust in searching complex multidimensional design spaces.     

Over GHz electrical circuit model of a high-density multiple line grid array (MLGA) interposer

The multiple line grid array (MLGA) interposer was recently introduced as a future high-density high-speed bonding method. In this paper, we introduce an electrical model and high-frequency characteristics of the MLGA interposer. The high-frequency electrical model was extracted from microwave S-parameter measurements up to 20 GHz as well as from fundamental microwave network analysis. For the parameter fitting process during model extraction, an optimization method was used. Several different types of MLGA interposers were designed, assembled and tested. The test vehicles contained coplanar waveguides, probing pads and an MLGA interposer structure. The height of the MLGA, the conductor shape inside the MLGA, and the dielectric insulator of the MLGA were varied. From the model, an MLGA with a height of 0.4 mm and a polymer dielectric insulator was found to have 203 pH of self inductance, 49 pH of mutual inductance with the nearest ground conductor line, and 186 fF of mutual capacitance. By reducing the height of the MLGA and by using an insulator with a lower dielectric constant, parasitic inductance and capacitance is further reduced. TDR/TDT simulation and measurement showed the validity of the extracted model parameters of the MLGA interposer. Circuit simulation based on the extracted model revealed that the MLGA interposer could be successfully used for microwave device packages up to 20 GHz and for high-speed digital device packages with a clock cycle up to 5 GHz.     

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO2 for no reduction by NH3

Deactivation of copper-ion-exchanged hydrogen-mordenite-type zeolite catalyst by SO₂ for NO reduction by NH₃ was examined in a fixed-bed flow reactor. The deactivation of the catalyst was strongly dependent on reaction temperature. At high reaction temperatures over 300°C, the catalyst did not lose its initial activity up to 50 h of operation, regardless of SO₂ feed concentration from 500 to 20,000 ppm. However, at low reaction temperatures near 250°C, apparent deactivation did occur. Changes in the physicochemical properties such as surface area and sulfur content of deactivated catalyst well correlated with catalyst activity, depending upon reaction temperatures. The deactivation was due to pore blocking and/or filling by deactivating agents, which plugged and/or filled the pores of catalyst. The deactivating agents deposited on the catalyst surface were presumed to be (NH₄)₂SO₄ and/or (NH₄)HSO₄ from the results of TGA and ion-chromatography measurement.     

Parathion degradation and toxicity reduction in solar photocatalysis and photolysis.

The solar photocatalytic degradation of methyl parathion was investigated using a circulating TiO2/solar light reactor. Under solar photocatalysis condition, parathion was more effectively degraded than solar photolysis and TiO2-only conditions. With solar photocatalysis, 20 mg/L of parathion was completely degraded within 60 min with a TOC decrease of 63% after 150 min. The main ionic byproducts during photocatalysis recovered from parathion degradation were mainly as NO3-, NO2- and NH4+, 80% of the sulphur as SO4(2-), and 5% of phosphorus as PO4(3-). The organic intermediates 4-nitrophenol and methyl paraoxon were also identified, and these were further degraded in solar photocatalytic condition. Two different bioassays (Vibrio fischeri and Daphnia magna) were used to test the acute toxicity of solutions treated by solar photocatalysis and photolysis. The Microtox test using V. fischeri showed that the toxicity expressed as EC50 (%) value increased from 5.5% to >82% in solar photocatalysis, indicating that the treated solution is non-toxic, but only increased from 4.9 to 20.5% after 150 min in solar photolysis. The acute toxicity test using D. magna showed that EC50 (%) increased from 0.05 to 1.08% under solar photocatalysis, but only increased to 0.12% after 150 min with solar photolysis, indicating the solution is still toxic. The pattern of toxicity reduction parallels the decrease in TOC and the parathion concentrations.     

Fabrication and performance of parallel-addressed InGaN micro-LED arrays

High-performance, two-dimensional arrays of parallel-addressed InGaN blue micro-light-emitting diodes (LEDs) with individual element diameters of 8, 12, and 20 /spl mu/m, respectively, and overall dimensions 490 /spl times/490 /spl mu/m, have been fabricated. In order to overcome the difficulty of interconnecting multiple device elements with sufficient step-height coverage for contact metallization, a novel scheme involving the etching of sloped-sidewalls has been developed. The devices have current-voltage (I-V) characteristics approaching those of broad-area reference LEDs fabricated from the same wafer, and give comparable (3-mW) light output in the forward direction to the reference LEDs, despite much lower active area. The external efficiencies of the micro-LED arrays improve as the dimensions of the individual elements are scaled down. This is attributed to scattering at the etched sidewalls of in-plane propagating photons into the forward direction.     

共面转换液晶显示器中获得对比度高于1:600的新技术

薄膜晶体管液晶电视(TFT-LCD TV)因为具有薄、轻、紧凑和可随意放置的特点，已经占据了大部分电视机市场。除了这些物理特性以外，最重要的特性是已具有了良好像质的对比度。为了将对比度提高到1：600以上，对偏振片膜、背光源板、滤色片树脂、电极锥角和摩擦条件等都进行了研究。优化的背光板组合，光滑的电极锥角和摩擦方法的控制是提高对比度的主要控制因素。应用新开发的滤色片树脂，对获得高对比度最为有效。