Polyurethane–poly(methyl methacrylate) block copolymer dispersions through polyurethane macroiniferters

Polyurethane macroiniferter/poly(methyl methacrylate) block copolymer dispersions with inverse core‐shell morphologies were obtained from 1,1,2,2,‐tetraphenylethane‐1,2‐diol, dimethylol propionic acid, 4,4′‐diphenylmethane diisocyanate, and poly(propylene glycol) via a living radical mechanism. Molecular weight, particle size and dispersion viscosity, and thermal, mechanical, and dynamic mechanical properties of the dispersion cast films are reported as a function of copolymerization time. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1971–1975, 2003     

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups with reduced environmental impact

A water‐developable negative photoresist based on the photocrosslinking of N‐phenylamide groups was prepared by the copolymerization of 4‐styrenesulfonic acid sodium salts (SSS) with N‐phenylmethacrylamide (copolymer A) or p‐hydroxy‐N‐phenylmethacrylamide (copolymer B), and its properties such as solubility changes, photochemical reaction, and photoresist characteristics were studied. The copolymer containing a relatively higher amount of SSS units was soluble in water. Solubility changes of the copolymers in the various buffer solutions of pH 4 ～ 11 and in water upon irradiation were observed by the measurement of insoluble fraction. The copolymers were soluble in water before irradiation, whereas they became insoluble upon irradiation with the UV light of 254 nm. The photochemical reaction of the copolymer studied by the UV and IR absorption spectroscopies indicated that a photo‐Fries rearrangement was favored for copolymer A, whereas a photocrosslinking reaction was predominate for copolymer B. Resist properties of the copolymers were studied by measurement of the normalized thickness and by development of the micropattern. Negative tone images with a resolution of 1 μm were obtained with these materials that have a sensitivity (D) of ～ 1100 mJ/cm² with an aqueous developing process.© 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1172–1180, 2002     

Parameters determining the agglomeration behavior of anhydrous L-ornithine-L-aspartate (LOLA) crystals prepared by drowning out crystallization

Crystallization of L-ornithine-L-aspartate (LOLA) by drowning out was performed for the production of the anhydrous form of LOLA. The needle-like LOLA crystals were formed and spherically agglomerated during precipitation in a semibatch crystallizer. The primary crystal size in the agglomerate remains unchanged after completion of the crystallization. Therefore, the agglomeration process of primary crystals played an important role for controlling LOLA crystal size. The agglomeration of LOLA crystals was governed by not only the physico-chemical parameters such as the temperature and feed concentration, but also the hydrodynamic parameters such as agitation speed and feeding rate. The crystal size and the shape have been shown to be important factors in product impurity and flowability. Thus, the optimum condition of LOLA crystallization process by drowning-out could be obtained.     

Exploration of unknown object by active touch of robot hand

This paper proposes a method of exploring the local shape of an unknown object using the force and torque information obtained from active touch. In the first, we present a method to estimate an unknown curvature, using rolling and sliding motion with a force/torque sensor attached to the fingertip of the hand. Then, the normal curvature equation from 2D curvatures is obtained. Finally we present a reconstruction algorithm of local geometry by using a normal curvature equation, which is composed of principal curvatures and principal directions. The method is tested by using a hand-arm system consisting of an industrial robot arm and an anthropomorphic robot hand with 6-axis force/torque sensor. The feasibility of the proposed method is experimentally validated for objects with simple geometries such as cylinder, spheres etc.     

Developmental variations in plasma leptin,leptin soluble receptor and their molar ratio in healthy infants

Background  

Leptin and its soluble receptor (sOB-R) are important to regulation of body composition but there are no data on the developmental variations in these plasma variables and their relationship with body composition measurements,     

Chemiresistor sensor using elastomer-functionalized carbon nanotube nanocomposites for the detection of gasoline spills

Two types of multi-walled carbon nanotube (MWNT)-based elastomer nanocomposites are used as a sensor material for the detection of gasoline spills by applying the interdigitated electrode (IDE) device. MWNT-g-polyisoprene (PI) and Si-MWNT/natural rubber (NR) are prepared by applying “grafting-from” and “grafting-to” process, respectively. When compared based on the identical condition of gasoline sensing test, the maximum response value to the exposure of gasoline is 17.5 for MWNT-g-PI sensor and 12.9 for Si-MWNT/NR sensor, which reach the maximum in less than 3 min. The MWNT-g-PI sensor selectively detects gasoline, and its response is completely reversible. It shows that the longer chain length of PI brings about the larger response of MWNT-g-PI sensor to gasoline. The sensitivity of MWNT-g-PI sensor highly depends on both how much gasoline is exposed to the sensor and what bias voltage is applied to the IDE device. The IDE sensor using MWNT-g-PI nanocomposites effectively detects gasoline spills.     

Temperature and grain size dependence of superplasticity in a Zn−0.3wt.%Al alloy

The superplastic deformation behavior of quasi-single phase Zn-0.3 wt. %Al was investigated. A series of load relaxation and tensile tests was conducted at various temperatures ranging from RT (20 °C) to 200 °C. The recently proposed internal variable theory of structural superplasticity was applied. The flow curves obtained from load relaxation tests were shown to consist of contributions from interface sliding (IS) and accommodating plastic deformation. In the case of quasi-single phase Zn-0.3 wt.% Al alloy with an average agrain size of 1 μm, the IS behavior could be described as a viscous flow process characterized by a power index of M_g=0.5. A large elongation of about 1400% was obtained at room temperature and the strain rate sensitivity parameter was about 0.4. Although relatively large-grained (10 μm) single phase alloy showed a high value of strain rate sensitivity comparable to that of fine-grained alloy at very low strain rate range, IS was not expected from the analysis based on the internal variable theory of structural superplasticity at room temperature. As the temperature increased above 100 °C, however, the contribution from IS was observed at a very low strain rate range. A high elongation of ∼400% was obtained in a specimen of 10-μm-grain-size at 200 °C under a strain rate of 2×10⁻⁴/sec. Jointly appointed at Center for Advanced Aerospace Materials (CAAM)     

Suppressing harmonic vibrations of a miniature cryogenic cooler using an adaptive tunable vibration absorber based on magneto-rheological elastomers

This paper presents dynamic performances of an adaptive tunable vibration absorber (TVA) designed to suppress the main harmonic disturbance of a miniature linear cryogenic cooler, which is being used in space applications such as an observation satellite. The adaptive TVA employs a magneto-rheological elastomer (MRE) for a variable stiffness element. This study first investigates the shear modulus change of MRE samples with respect to the magnetic flux density, which varies through the alignment of particle chains. The MRE with the maximal shear modulus change is mounted for the TVA on a prototype cooler, which emulates the characteristics of a miniature cryogenic cooler. Using the test setup, a series of vibration tests are performed to evaluate the performance and efficacy of the MRE TVA and its re-tuning ability. The experimental results show that the MRE TVA is able to robustly suppress the vibration of the cooler even when the frequency of resonant vibration is changed up to 87% from its initial frequency.     

Green practices-IS alignment and environmental performance: The mediating effects of coordination

The problem of environmental sustainability has been growing in recent years with an interest from both researchers and practitioners. A major gap that exists is the absence of empirical studies that addressed business value of green IS (information systems). Thus, drawing on the resource-based view of the firm and IT (information technology) business value literature, this study aims to develop a comprehensive research model of green practice-IS alignment, the key cross-functional coordination of green practices with manufacturing and marketing functions, and firm performance. The study provides a better understanding of the relationship between green practice-manufacturing coordination and green practice-marketing coordination, and how both variables mediated the relationship between green practices-IS alignment and environmental performance. The data used in this study were collected from manufacturing firms. The results show that a firm’s green practices-IS alignment had a positive effect on both green practices-manufacturing coordination and green practices-marketing coordination. In turn, both green practices-manufacturing coordination and green practices-marketing coordination are the significant predictors of environmental performance. Meanwhile, green practices-IS alignment had an indirect effect on environmental performance via both green practices-manufacturing coordination and green practices-marketing coordination. Moreover, the findings of this study show that environmental performance is an important predictor of economic performance.