Energy efficiency optimization of one-way and two-way DF relaying considering circuit power

In this paper, the energy efficiency (EE) of a decode and forward (DF) relay system is studied, where two sources communicate through a half-duplex relay node in one-way and two-way relaying strategies. Both the circuitry power and the transmission power of all nodes are taken into consideration. In addition, three different coding schemes for two-way DF relaying strategy with two phases and two-way DF relaying with three phases are considered. The aim is to maximize the EE of the system for a constant spectral efficiency (SE). For this purpose, the transmission time and the transmission power of each node are optimized. Simulations are used to compare the EE–SE curve of different DF strategies with one-way and two-way amplify and forward (AF) strategies and direct transmission (DT), to find the best energy efficient strategy in different SE conditions. Analytical and simulation results demonstrate that in low SE conditions, DF relaying strategies are more energy efficient compared to that of AF strategies and DT. However, in high SE conditions, the EE of two-way AF relaying and DT strategy outperform some of the DF relaying strategies. In simulations, the impact of different circuitry power and different channel conditions on the EE–SE curves are also investigated.     

On the modeling of the annual corrosion rate in main cables of suspension bridges using combined soft computing model and a novel nature-inspired algorithm

Neural Computing and Applications - Suspension bridges are critical components of transport infrastructure around the world. Therefore, their operating conditions should be effectively monitored to...     

Preparation and characterisation of hydroxyl-terminated polybutadiene-based polyurethane/graphene nanocomposites

Polyurethane nanocomposites based on hydroxyl-terminated polybutadiene and graphene with different formulations were cured using toluene diisocyanates. The rheological, physical, mechanical, thermal and morphological properties of the nanocomposites were investigated. The viscosity of the samples increased rapidly with graphene content. However, the kinetic rate of the curing process was lower for the nanocomposites in comparison to the neat matrix. The mechanical properties showed a successive increase in the tensile strength and reduction in elongation at break with an increase in graphene content. The highest value of the modulus, density and degradation temperature was obtained for the nanocomposite with 1?wt-% graphene. The hardness properties of the nanocomposites enhanced with curing time. The morphological properties of the nanocomposites are also investigated with the field emission scanning electron microscopy which confirmed the agglomeration occurrence at the high graphene contents.     

Low Temperature Catalytic Oxidation of Binary Mixture of Toluene and Acetone in the Presence of Ozone

This work reports on gas phase catalytic ozonation of a binary mixture of toluene and acetone and compares it with catalytic ozonation of single component acetone and toluene. Catalytic ozonation was conducted at 25–90 °C on MnO_x/γ-Al₂O₃ catalyst. XANES and EXAFS were used to identify formal oxidation state of Mn and local structure of manganese oxide in the catalyst. Absorption energy of Mn K-edge of the catalyst was determined to be 6553.86 eV indicating that the majority of manganese in the catalyst was in 3+ oxidation state. Catalytic ozonation in the mixture was favourable for removal of toluene, and repressive for removal of acetone. This was due to (a) lower apparent activation energy of catalytic ozonation of toluene (E_{a, Toluene}?=?31 kJ mol^?1?<?E_{a, Acetone}?=?40 kJ mol^?1) that led to higher reactivity of toluene with active oxygen species, and (b) inhibitory effect of accumulated carbonaceous byproducts on the acetone removal. Increase of reaction temperature enhanced conversion of both compounds, decreased the gap between toluene and acetone conversions, and improved CO_x yield. Overall degradation pathway of toluene and acetone in the mixture was determined by identifying the reaction intermediates and carbonaceous deposits on the catalyst. The observed mixture effects helped to understand potentials and limitations of catalytic ozonation in treating mixture of VOCs, which will aid in developing commercial air treatment systems.

Graphical Abstract

Open image in new window

     

Synthesis of a novel sulfonated poly(amide‐imide) and its application in preparation of ultrafiltration PES membranes as a modifier

Sulfonated poly(amide‐imide) (SPAI) copolymer was synthesized, characterized, and blended into poly(ether sulfone) (PES)/dimethylacetamide casting solutions to prepare ultrafiltration membranes. Different weight ratios of the copolymer (0–10 wt %) were mixed in the PES casting solution. The analyses of contact angle and attenuated total reflection‐Fourier transform infrared spectra were used to study hydrophilicity and physicochemical properties of the membrane surface, respectively. The membranes were further characterized by scanning electron microscopy images, ultrafiltration performance, and fouling analyses. The outcomes showed that addition of the SPAI in the PES matrix improved considerably the membranes hydrophilicity. Moreover, with increasing SPAI concentration, the porosity, flux recovery ratio, and pure water permeability of the modified membranes were improved. The pure water flux was increased from 3.6 to 12.4 kg/m² h by increasing 2 wt % SPAI. The antifouling property of the modified PES membranes against bovine serum albumin, tested by a dead‐end filtration setup revealed that bovine serum albumin rejection of the obtained membrane was also enhanced and the antifouling properties of the blending membranes were improved. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46477.     

Single-machine earliness–tardiness scheduling with two competing agents and idle time

Two-agent scheduling has gained a lot of research attention recently. Two competing agents who have their own objective functions have to perform their respective set of jobs on one or more shared machines. This study considers a two-agent single-machine earliness and tardiness scheduling problem where jobs have distinct due dates and unforced idleness in between any two consecutive jobs is allowed. The objective is to minimize the total earliness and tardiness of jobs from one agent given that the maximum earliness–tardiness of jobs from the other agent cannot exceed an upper bound. In other words, each job from the second agent has a hard due window, whereas each job from the first agent will incur a penalty if completed either before or after its due date. Two mathematical models of the problem are presented, and several necessary optimality conditions are derived. By exploiting the established dominance properties, heuristic algorithms are developed for the problem. Finally, computational experiments are conducted to assess the models and heuristic procedures.     

A novel polyurethane modified with biomacromolecules for small-diameter vascular graft applications

There is a growing demand for small-caliber tissue-engineered vascular grafts to replace damaged vessels. Fabricated scaffolds are unable to precisely mimic the mechanical properties of native vessels, provide long-term patency and support cell adhesion and growth, in particular support endothelialization. In this study, a new biodegradable poly(ether ester urethane) urea (PEEUU) was synthesized. The synthesized polyurethane was then functionalized by introducing free amino groups through aminolysis for further surface modification by immobilization of biomacromolecules on the surface of vascular grafts. The modified surfaces were then characterized using attenuated total reflectance-Fourier transform infrared spectroscopy, water contact angle measurement and atomic force microscopy. The mechanical properties of the fabricated scaffolds were analyzed, revealing mechanical properties close to that of the natural vessels. Surface modifications led to improved cell–scaffold interactions, showing appropriate cell attachment and function on the scaffolds. A confluent layer of endothelial cells was formed on biomacromolecule-immobilized PEEUU vascular grafts. The preliminary results of this study demonstrated that the new polyurethane modified with biomacromolecules can be considered as a candidate material for vascular tissue engineering application with capability to support endothelialization of fabricated vascular grafts.     

An enhanced possibilistic programming approach for reliable closed-loop supply chain network design

Most of current logistics network design models in the literature typically assume that facilities are always available and absolutely reliable while in practice, they are always subject to several operational and disruption risks. This paper proposes a reliable closed-loop supply chain network design model, which accounts for both partial and complete facility disruptions as well as the uncertainty in the critical input data. The proposed model is of mixed integer possibilistic linear programming type that aims to minimise simultaneously the total cost of opening new facilities and the expected cost of disruption scenarios. An enhanced possibilistic programming approach is proposed to deal with the epistemic uncertainty in input data. Furthermore, the p-robustness criterion is used to limit the cost of disruption scenarios and protect the designed network against random facility disruptions. Several numerical experiments along with sensitivity analyses on uncertain parameters are conducted to illustrate the significance and applicability of the developed model as well as the effectiveness of the proposed solution approach. Our results demonstrate that operational and disruption risks considerably affect the whole structure of the designed network and they must be taken into account when designing a reliable closed-loop logistics network.     

Enhancement of Critical Current Density of MgB<Subscript>2</Subscript> by Glutaric Acid Doping: a Simultaneous Improvement on the Intrinsic and Extrinsic Properties

In this study, we report an enhancement of critical current density of bulk MgB₂ superconductors by glutaric acid (C₅H₈O₄) doping. The effects of glutaric acid doping on MgB₂ lattice resulted in a record self-field J _c of the order of 10⁶ A/cm². A simultaneous improvement in the connectivity, pinning force, and H _c2 is the major factor that determined excellent J _c performance. X-ray diffraction analysis showed that samples were single-phase MgB₂ with a minor trace of impurities. A dramatic change in grain morphology and homogeneity in grain distribution was found in the SEM images of doped samples. We observed that homogeneity in grain distribution played a crucial role in the connectivity and the upper critical field (H _c2) of the doped samples. We were able to introduce a new dopant through a two-step mixing approach which is suitable to overcome the degradation of low field and self-field J _c reported for carbon-doped MgB₂ superconductor samples.