Secondary bioreceptivity of granite: effect of salt weathering on subaerial biofilm growth

Salt crystallisation is a very common and powerful weathering agent that can modify the petrophysical properties of building stone such as granite. In addition, the weathering can affect the susceptibility of the stone to biological colonisation. The aims of the present study were to examine the properties of a granite weathered by sodium chloride crystallisation and to evaluate the effects of the weathering on the secondary bioreceptivity of the stone to subaerial phototrophic biofilms. For this purpose, granite samples were subjected to a laboratory-based accelerated salt weathering test, and changes in weight, open porosity, bulk density, capillary water content, abrasion pH and surface roughness of the samples were determined. Samples of both weathered and non-weathered granite were then inoculated with a multi-species phototrophic culture derived from a natural subaerial biofilm and incubated under standardised laboratory conditions for 3 months. The weight loss produced by the weathering process was consistent with significant changes in abrasion pH and surface roughness. The bioreceptivity of the stone was also altered. According to the bioreceptivity index, the granite under study was characterised by ‘mild primary bioreceptivity’, but ‘high secondary bioreceptivity’ after the salt weathering process. Study of the secondary bioreceptivity of stone materials can provide very useful information about response to weathering effects, and the findings can be used to improve the selection of materials for building purposes.     

Development and validation of a high-performance liquid chromatography-mass spectrometry assay for determination of amphetamine, methamphetamine, and methylenedioxy derivatives in meconium

A procedure based on liquid chromatography-mass spectrometry (LC-MS) is described for determination of amphetamine, methamphetamine, and methylendioxy derivatives in meconium, using 3,4-methylendioxypropylamphetamine as internal standard. The analytes were initially extracted from the matrix by 17 mM methanolic HCl. Subsequently, a solid-phase extraction with Bondelut Certify columns was applied. Chromatography was performed on a C(18) reversed-phase column using a linear gradient of 10 mM ammonium bicarbonate, pH 9.0-methanol as a mobile phase. Analytes were determined in LC-MS single ion monitoring mode with an atmospheric pressure ionization-electrospray interface. The method was validated in the range 0.005-1.00 microg/g using 1 g of meconium per assay. Mean recoveries ranged between 61.1 and 87.2% for different analytes. The quantification limits were 0.005 microg/g meconium for amphetamine, methamphetamine, and 4-hydroxy-3-methoxymethamphetamine and 0.004 microg/g meconium for 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxyethylamphetamine, and N-methyl-1-(3,4-methylenedioxyphenyl)-2-butanamine. The method was applied to analysis of meconium in newborns to assess eventual fetal exposure to amphetamine derivatives.     

Bond calibration method for Young’s modulus determination in the discrete element method framework

A new methodology for the calibration of bond microparameters in rocks represented by a package of joined random spherical particles in the discrete element method (DEM) framework is presented. Typically, calibration is achieved through a trial-and-error procedure using several DEM simulations of uniaxial compressive tests (UCTs). The bond calibration model (BCM) does not need a time-dependent UCT-DEM simulation to establish the relation between the microproperties of the bond and the macroproperties of the rock specimen. The BCM uses matrices to describe the interaction forces exerted by bonds and, by means of an assembly process similar to the finite element method, it can describe the complex network of bonds, enabling the model to capture small variations in particle size and bond distribution as demonstrated in this work. In this work, the BCM is presented and compared with UCT simulations performed using Esys Particle software. Multiple simulations are done with constant bond properties and different particle size ratios (\(D_{MAX}/D_{MIN})\) that cause small variations in the specimen’s Young’s modulus; these variations are well captured by the BCM with an error of <10%.     

Karl Eugen Dühring: Scientist and political extremist

Eugen Dühring was a controversial political scientist that constructed a socialist metaphysical system uniting naturalism with a priori principles. His political views were characterized by extremism; he was racist, chauvinist, antiSemitic, and antiacademic institutions. Although his major activities were in politics, he did contribute some important works in physics and thermodynamics and left us with the well-known Dühring’s rule correlating the boiling point of a solution with that of the pure solvent.     

Historical development of the vapor pressure equation from dalton to antoine

The vapor pressure of a pure liquid or of a solution is a property that has been observed since antiquity. Here, we trace the different equations that have been suggested to describe the variation of the vapor pressure with the temperature, until the time when Antoine proposed his equation, a functionality that has survived the test of time and is the one mostly widely used today.     

Biomodulation of Fluorouracil in colorectal cancer

5-Fluorouracil (5-FU) remains the agent of choice for the treatment of colorectal cancer. Research has focused on the biomodulation of 5-FU in order to attempt to improve the cytotoxity and therapeutic effectiveness of this drug in the treatment of advanced colorectal cancer. Modulation of 5-FU by methotrexate (MTX), trimetrexate (TMTX), interferon-alpha (IFN-alpha), leucovorin (LV), or N-(phosphonacetyl)-L-asparte acid (PALA) has produced higher response rates than those observed with 5-FU alone. Methotrexate may improve the durability of response to or survival with 5-FU, but with inferior results compared with those in trials of 5-FU and leucovorin. Trimetrexate produces a number of responses, and further phase III trials are in progress to confirm the results of promising phase II trials with this drug. IFN-alpha has shown therapeutic efficiency when combined with 5-FU alone or with 5-FU and leucovorin, but latest studies with these combinations have shown increased toxicity. Initial single-institution phase I trials with 5-FU and PALA reported promising responses, but the latter responses with PALA were not substantiated in randomized multicenter trials. Leucovorin enhances the cytotoxic activity of 5-FU in vitro and in vivo, and several clinical trials have shown improved response rates and possible trends in improved survival when such therapy is compared with the use of 5-FU as a single-agent. More recent randomized trials have focused their attention on determining the optimal dose and schedule with this combination for producing a better clinical response with minimal toxicity. Schedules using infusional 5-FU appear to be the most active regimens when 5-FU is used as a single agent, as demonstrated by recent randomized trials. The Southwest Oncology Group (SWOG) and the Eastern Cooperative Oncology Group (ECOG) have performed separate randomized trials and have shown that the optimal regimens employ infusional 5-FU as a single agent, and that these are the least toxic regimens, perhaps more effective, and associated with a better quality of life. Future studies will focus on infusional regimens involving either short-term, high-dose protracted or long-term, low-dose protracted infusion of 5-FU, since these regimens have shown the most favorable toxicity spectrum and produced the longest survival times. Future research will also focus on the evaluation of various methods of delivery of 5-FU, including oral administration of the drug in combination with compounds that can modify its catabolism.     

A comparison of the performance of lightweight glass containers manufactured by the P&B and B&B processes

The mechanical performance of lightweight glass packages produced by the NNPB (narrow neck press and blow) process was evaluated by comparison with the same glass packages (regular weight) produced by the conventional process (blow and blow). The temper number (annealing process evaluation), thickness distribution behaviour and mechanical performance (impact, vertical load and thermal shock strength) were analysed before and after line simulation, applied in optimized conditions in the laboratory. The performance of lightweight glass packages under transport simulation (truck envelope) in relation to the regular weight bottles was also evaluated. Both bottles presented residual stress values within the specified limits. The lightweight glass bottles had a more homogenous thickness distribution in comparison with the regular weight bottles and a better performance (about 33% improvement) in relation to the impact strength, especially in the heel, even when evaluated after line simulation. As to the vertical load strength, the lightweight glass bottle also indicated a superior performance to the regular weight bottle, both before and after line simulation. Both bottles withstood the temperature difference of 42°C that such packages are supposed to resist according to thermal shock specification. Due to the better thickness distribution of lightweight glass packages, they withstood a maximum temperature difference (progressive thermal shock) of 5–10°C higher than the regular weight bottles. No restrictions of the lightweight glass packages submitted to the transport simulation were found. Copyright © 2002 John Wiley & Sons, Ltd.     

Medical therapy of Graves' disease: does thyroxine prevent recurrence of hyperthyroidism?

Sixty patients with Graves' disease (GD) hyperthyroidism were distributed in two randomized groups. Patients in group A (n = 30) received carbimazole by a titration regimen, and patients in group B (n = 30) were treated with higher doses of carbimazole plus T4. Clinical and analytical evaluations were done at baseline, during treatment (18.4 +/- 2.6 months), and after, until the relapse of hyperthyroidism, or for 4.98 +/- 1.6 yr in patients who did not relapse. There were no differences in clinical parameters, thyroid hormones, or TSH binding inhibitory immunoglobulins (TBII) levels between the two groups, either at baseline or at the end of treatment. Serum TSH persisted undetectable in 16 out of 60 patients (group A: 9; group B: 7), after treatment. Relapse occurred in 38 patients (63.3%), (group A: 18 (60%) vs. group B: 20 (66.7%)). Patients who relapsed had bigger goiters at baseline (P = 0.02) and at the end of treatment (P = 0.03). Eighty-seven percent (14/16) of patients with undetectable TSH after therapy relapsed, vs. 54.5% (24/44) of those with normal TSH (P = 0.01). Undetectable TSH at the end of treatment was the only independent variable in the logistic analysis to predict relapse. Treatment modality did not influence the relapse rate. This study has found that, in Spanish patients, the use of high doses of carbimazole with T4 offers no advantages in the treatment of GD hyperthyroidism.     

A combinatorial auction improves school meals in Chile: a case of OR in developing countries

The Chilean State delivers essential meal services at schools for low‐income students. Junta Nacional de Auxilio Escolar y Becas, the institution in charge of covering 1,300,000 children, leases the meal service to private enterprises. We developed an integer linear programming model to assign the meal contracts, in a process known as combinatorial auctions. The resulting model, which is NP‐hard, led to significant improvements in efficiency and also contributed to making the process more transparent. The results are apparent in substantial improvements in quality and coverage of the service, and important savings to the country, which are equivalent to feeding 300,000 children in addition. We developed techniques to solve the combinatorial models and also to analyze and compare multiple scenarios to find robust solutions. For the objective function of this problem, we analyzed several options to consider different kinds of social benefits. In this paper, we describe the problem, the methodology and the results. We also present empirical results based on 6 years of experience. Finally, we discuss the relevance and impact of using operations research in these central issues in developing countries.     

Observations on the synthesis and structure of wide pore aluminum phosphate molecular sieves

The synthesis of wide pore 18-ring aluminum phosphates has been explored using several amines as templates. The systems studied in more detail involve the use of dipentylamine (DPTA), a combination of tributylamine (TBA) and dipentylamine and dipropylamine (DPA). In the latter two systems a thermally unstable phase with an XRD pattern similar to VPI-5 was obtained which has been identified as the H1 phase. In the DPTA system both thermally stable and unstable phases can be formed, depending on the reaction conditions used. By controlling the gel formation in the DPA system ALPO₄-8 was synthesized by hydrothermal methods. The products in the first two cases contain significantly higher amounts of the amine than has been reported in the synthesis of VPI-5. The structure of the thermally unstable H1 phase has been solved from X-ray powder data collected using a synchrotron X-ray source and shown to contain 6-coordinate aluminum in the 4-rings.