The impact of agricultural management practices on nutrient losses to water: data on the effects of soil drainage characteristics.

Against the background of increasing nutrient concentrations in Irish water bodies, this study set out to gain information on the potential of agricultural grassland to lose nutrients to water. Overland flow, flow from artificial subsurface drains and stream flow were gauged and sampled during heavy rainfall events. Dissolved reactive phosphorus (DRP), potassium (K), total ammonia (TA), and total oxidised nitrogen (TON) were measured in water samples. When the nutrient concentrations in water were examined in relation to the grassland management practices of the study catchments it emerged that soil P levels, the application of organic and inorganic fertilisers before heavy rainfall and the presence of grazing animals could all influence nutrient concentrations in surface and subsurface drainage water. Overall, the drainage characteristics of soil were found to have a considerable influence on the potential of land to lose nutrients to water.     

The Effect of Nucleators on the Quality of the Surface of Glass-Ceramic Denture Coatings

The effect of nucleator additives on the surface relief and the degree of crystallization of material intended for the dentine and enamel layers of artificial denture is considered. It is established that hydroxyapatite additive is optimal for producing the required relief in the prime and dentine layers.     

Simulation and experimental analyses of electromagnetic transients behaviors of lightning surge on vertical conductors

Simulation of very fast surge phenomena in a three-dimensional (3-D) structure requires a method based on Maxwell's equations, such as the finite-difference time-domain (FDTD) method or the method of moments, because circuit-equation-based methods cannot handle the phenomena. This paper uses a method of thin-wire representation of the vertical conductor system for the FDTD method which is suitable for the 3-D surge simulation. The thin-wire representation is indispensable to simulate electromagnetic surges on wires or steel frames in which the radius is smaller than a discretized space step used in the FDTD simulation. In this paper, a general surge analysis program named the virtual surge test lab based on the Maxwell's equations formulated by the FDTD method, is used to simulate the surge phenomena of a vertical conductor, including the effects of horizontal wave incidence and vertical wave incidence. Experimental results on the reduced scale model have been presented in order to compare among the simulation results by the FDTD method and the results using numerical electromagnetic code based on the MoM.     

A brief introduction to functional MRI.

IEEE Engineering in Medicine and Biology Magazine focuses on modern methods for the analysis of data from functional magnetic resonance imaging (fMRI) studies. Accordingly, the guest editors have seen fit to begin with a brief article on the history, mechanisms and methods behind fMRI. This is followed by the presentation of recent significant progress in paradigm design for fMRI as well as development of other methods for assessing the functional anatomy of the human brain, such as diffusion tensor imaging, for mapping white matter fiber tracts. Thus, the future appears to promise a more integrative approach to functional brain imaging, in which data from multiple modalities are entered into comprehensive analyses of brain function and connectivity.     

Solution-Processed n-Type Organic Field-Effect Transistors With High on /off Current Ratios Based on Fullerene Derivatives

Solution-processed n-type organic field-effect transistors (OFETs) based on the fullerene derivative {6}-1-(3-(2- thienylethoxycarbonyl)-propyl)-{5}-l-phenyl-[5,6]-C61 (TEPP) and phenyl-C61-butyric acid methyl ester (PCBM) in a multiring source/drain structure are reported. Devices with TEPP show high electron mobility up to 7.8 x 10^-2 cm²/Vs in the saturation regime for bottom-contact OFETs with Au S/D electrodes with a solution-processed fullerene derivative. The ON/OFF ratios reported in this letter, which are in the range of 10⁵ -10⁶, are among the highest values reported for such devices. This mobility is always higher compared to PCBM devices prepared in identical conditions. The mobility of TEPP and PCBM increased with increasing temperatures in the range of 100-300 K with activation energy of 78 and 113 meV, respectively, which suggests that the thermally activated hopping of electrons is dominant in TEPP.     

Performance of space-time codes for a large number of antennas

We study the asymptotic behavior of space-time codes when the number of transmit and receive antennas grows to infinity. Specifically, we determine the behavior of pairwise error probabilities with maximum-likelihood (ML) decoding and with three types of receiver interfaces: the ML interface, the linear zero-forcing (ZF) interface, and the linear minimum-mean-square-error (MMSE) interface. Two situations are studied: when the number of receiving antennas grows to infinity while the number of transmitting antennas is finite, and when both numbers grow to infinity but their ratio remains constant. We show that with ML or linear interfaces the asymptotic performance of space-time codes is determined by the Euclidean distances between codewords. Moreover, with the two linear interfaces examined here the number r of receive antennas must be much larger than the number t of transmit antennas to avoid a sizeable loss of performance; on the other hand, when r ≫ t, the performance of these linear interfaces comes close to that of ML. The dependence of error probabilities on Euclidean distance is valid for intermediate signal-to-noise ratios (SNRs) even when the number of antennas is small. Simulations validate our theoretical findings, and show how asymptotic results may be substantially valid even in a nonasymptotic regime: thus, even for few antennas, off-the-shelf codes may outperform space-time codes designed ad hoc     

The radiation crosslinking and scission of ethylene-propylene copolymers studied by solid-state nuclear magnetic resonance

Methyl groups from chain scission and H-crosslinks have been identified by solid-state nuclear magnetic resonance in amorphous ethylene-propylene copolymers containing 23 and 36 mole % propylene after γ-irradiation to 10 MGy at 30°C. G (scission) and G (crosslink) values determined from the n.m.r. spectra and by extraction are in agreement, which suggests that the crosslinks are not clustered. This may differ from the situation in polyethylene where there is a substantial crystalline content. G(S). G(X) and the ratio G(S)/G(X) increase with increasing propylene content of the copolymers.     

Randomized unbiased design of regression experiments on functionals in a Hilbert space

Translated from Kibernetika, No. 2, pp. 58–66, March–April, 1991.     

Processing of engineering ceramics with high power CO2 lasers

The hardness and brittleness of high performance engineering ceramics such as zirconia, aluminia, silicon carbide and silicon nitride makes traditional processing very expensive and time consuming. Efforts have been made to cut thick commercial ceramics with a continuous wave CO₂ laser. The results obtained so far are very promising and materials up to 10 mm in thickness have been cut successfully.