The use of uric acid as a method of tracing domestic sewage discharges in riverine, estuarine and coastal water environments

The chemical tracking of sewage effluents discharged into fresh and saline waters presents difficulties, especially in estuaries. The main difficulty is caused by the dissolved constituents being used to monitor the effluent also occurring naturally at similar levels. Uric acid is present at significant levels in untreated sewage and is not normally found in unpolluted waters. Until now no suitable routine method has been available for uric acid estimation in fresh and saline waters at levels normally encountered in the environment. In this paper we describe a recently developed technique using high-performance liquid chromatography which estimates uric acid in both fresh and saline waters in the range 1–10,000 μg l⁻¹ with a precision (2σ) of ±20% at 2 μg l⁻¹, ±4% at 40 μg l⁻¹ and ±2% at 10 mg l⁻¹.     

On the presence of iron(II) in oxygenated surface waters: analytical implications

Iron(II) analyses using bathophenanthroline are shown to be characterized by an inherent, small positive interference when the pH of analysis is below 6.5 and iron(III) is present. The interference, which is due to a colored complex formed in the presence of FeOH²⁺ and bathophenanthroline, varies in magnitude according to the presence or generation of FeOH²⁺ during analysis. This interference necessitates reconsideration of published claims that low levels of stable iron(II) exist in oxygenated natural waters, particularly the surface layers of lakes.     

Electrohydrodynamic Augmentation of Forced Convection Heat Transfer

Augmentation of heat transfer due to injection of an ion flux through a thermal boundary layer is measured in a forced convection heat transfer apparatus. A nickel mesh injection grid is used to minimize the effect of the ``corona wind' associated with point discharges and thus to isolate an electrohydrodynamic (EHD) instability mechanism. The EHD instability is shown to be a viable mechanism in augmenting forced convection heat transfer. Change in the Nusselt number is documented as a function of an EHD instability interaction parameter, Reynolds number, and temperature gradient.     

Combination of hot-water surface pasteurization of whole fruit and low-dose gamma irradiation of fresh-cut cantaloupe

Improvements in methods for disinfecting fresh-cut cantaloupe could reduce spoilage losses and reduce the risk of foodborne illness from human pathogen contamination. The objective of this study was to investigate the feasibility of using hot-water treatment in combination with low-dose irradiation to reduce native microbial populations while maintaining the quality of fresh-cut cantaloupe. Whole cantaloupes were washed in tap water at 20 or 76 degrees C for 3 min. Fresh-cut cantaloupe cubes, prepared from the washed fruit, were then packaged in clamshell containers, and half the samples were exposed to 0.5 kGy of gamma radiation. Native microflora populations and sensory qualities were evaluated during the subsequent 7 days of storage at 4 degrees C. The hot-water surface pasteurization reduced the microflora population by 3.3 log on the surface of whole fruits, resulting in a lower microbial load on the fresh-cut cubes compared with cubes cut from fruit treated with cold water. Irradiation of cubes prepared from untreated fruit to an absorbed dose of 0.5 kGy achieved a low microbial load similar to that of cubes prepared from hot-water-treated fruit. The combination of the two treatments was able to further reduce the microflora population. During storage, the headspace atmosphere of the packages was not significantly influenced by any of the treatments. Color, titratable acidity, pH, ascorbic acid, firmness, and drip loss were not consistently affected by treatment with irradiation, hot water, or the combination of the two. Cubes prepared from hot-water-treated whole fruit had slightly lower soluble solids content. The combination of hot-water pasteurization of whole cantaloupe and low-dose irradiation of packaged fresh-cut melon can reduce the population of native microflora while maintaining the quality of this product.     

Luteinization of porcine preovulatory follicles leads to systematic changes in follicular gene expression

The LH surge initiates the luteinization of preovulatory follicles and causes hormonal and structural changes that ultimately lead to ovulation and the formation of corpora lutea. The objective of the study was to examine gene expression in ovarian follicles (n = 11) collected from pigs (Sus scrofa domestica) approaching estrus (estrogenic preovulatory follicle; n = 6 follicles from two sows) and in ovarian follicles collected from pigs on the second day of estrus (preovulatory follicles that were luteinized but had not ovulated; n = 5 follicles from two sows). The follicular status within each follicle was confirmed by follicular fluid analyses of estradiol and progesterone ratios. Microarrays were made from expressed sequence tags that were isolated from cDNA libraries of porcine ovary. Gene expression was measured by hybridization of fluorescently labeled cDNA (preovulatory estrogenic or -luteinized) to the microarray. Microarray analyses detected 107 and 43 genes whose expression was decreased or increased (respectively) during the transition from preovulatory estrogenic to -luteinized (P<0.01). Cells within preovulatory estrogenic follicles had a gene-expression profile of proliferative and metabolically active cells that were responding to oxidative stress. Cells within preovulatory luteinized follicles had a gene-expression profile of nonproliferative and migratory cells with angiogenic properties. Approximately, 40% of the discovered genes had unknown function.     

Biological reduction of nanoengineered iron(III) oxide sculptured thin films

Sculptured thin films (STFs) are assemblies of nominally identical, parallel nanowires with tailored shapes such as chevrons and spirals. A series of iron(lll) STFs were produced with varied crystallinity (from hematite toferrihydrite) and nanowire shapes (slanted columnar, clockwise helical, and counterclockwise helical). When the dissimilatory metal-reducing bacterium Shewanella putrefaciens CN32 was used to measure their bioreducibility, it was found that bioreduction was controlled primarily by oxide crystallinity. STFs were characterized by scanning electron microscopy, atomic force microscopy, and grazing incidence small-angle X-ray scattering. Postbioreduction characterizations determined that mineralogy of the film materials did not change, but surface roughness generally increased. Changes caused by bioreduction were assessed in terms of both transmittance and reflectance of light incident normal to the STFs. The greatest optical changes were obtained with crystalline hematite films. These results underscore the feasibility of an STF-based fiber optic iron(lll) reduction sensor for in situ subsurface deployment.     

Multi-element including rare earth content of lichens, bark, soils, and waste following industrial closure

The fate of rare earth and other rare elements entering the environment is largely unknown. The lichen Hypogymnia physodes was transplanted over a 40 km long transect centered on a major metallurgical waste dump close to the Zlatna town center two weeks after smelter closure. Lichens, bark, soil, and waste dump materials were analyzed for 56 elements (including REE). Lichen and bark multi-element compositions were alike, reflecting fixation of elements of environmental concern and the ability for tree canopies to concentrate substances leading to enhanced deposition to both lichens and bark. Higher REE enrichment in lichens than in soil confirm efficient fixation in lichens. The negative europium anomaly in lichens and soil, similar to that in upper crust, confirm a strong crustal influence on lichen signatures across the transect area. Multi-element analysis supports the view that epiphytic lichens, unlike trees, are not influenced by lower groundwater, and they are excellent indicators for REE and other rare elements entering the surface environment, difficult to detect by conventional means.     

Modeling ozone and aerosol formation and transport in the pacific northwest with the community Multi-Scale Air Quality (CMAQ) modeling system

The Community Multi-Scale Air Quality (CMAQ) modeling system was used to investigate ozone and aerosol concentrations in the Pacific Northwest (PNW) during hot summertime conditions during July 1-15, 1996. Two emission inventories (El) were developed: emissions for the first El were based upon the National Emission Trend 1996 (NET96) database and the BEIS2 biogenic emission model, and emissions for the second El were developed through a "bottom up" approach that included biogenic emissions obtained from the GLOBEIS model. The two simulations showed that elevated PM2.5 concentrations occurred near and downwind of the Interstate-5 corridor along the foothills of the Cascade Mountains and in forested areas of central Idaho. The relative contributions of organic and inorganic aerosols varied by region, but generally organic aerosols constituted the largest fraction of PM2.5. In wilderness areas near the 1-5 corridor, organic carbon from anthropogenic sources contributed approximately 50% of the total organic carbon with the remainder from biogenic precursors, while in wilderness areas in Idaho, biogenic organic carbon accounted for 80% of the total organic aerosol. Regional analysis of the secondary organic aerosol formation in the Columbia River Gorge, Central Idaho, and the Olympics/Puget Sound showed that the production rate of secondary organic carbon depends on local terpene concentrations and the local oxidizing capacity of the atmosphere, which was strongly influenced by anthropogenic emissions. Comparison with observations from 12 IMPROVE sites and 21 ozone monitoring sites showed that results from the two El simulations generally bracketed the average observed PM parameters and that errors calculated for the model results were within acceptable bounds. Analysis across all statistical parameters indicated that the NW-AIRQUEST El solution performed better at predicting PM2.5, PM1, and beta(ext) even though organic carbon PM was over-predicted, and the NET96 El solution performed better with regard to the inorganic aerosols. For the NW-AIRQUEST El solution, the normalized bias was 30% and the normalized absolute error was 49% for PM2.5 mass. The NW-AIRQUEST solution slightly overestimated peak hourly ozone downwind of urban areas, while the NET96 solution slightly underestimated peak values, and both solutions over-predicted average 03 concentrations across the domain by approximately 6 ppb.