Interference of salt and moisture on soil reflectance spectra

This article portrays the effects of salt and moisture on soil reflectance spectra and their consequent influences on the estimation of soil salinity and soil moisture contents (SMC). It is amid to demonstrate and discuss how the interference of salt and moisture, as soil constituents, on soil spectra can affect the estimation of either soil salinity or SMC when spectral variabilities are used as predictive variables. To achieve this objective, a data set was obtained from a test area where soil salinity and SMC were largely varied. Furthermore, the Inverted Gaussian (IG) modelling approach, which has been successfully used for the estimation of soil salinity under laboratory conditions and for the estimation of SMC for non-saline soil, is used in this study. Using the IG function, the near-infrared (NIR) and the shortwave infrared (SWIR) regions of the salt-affected soil spectra, with various amount of moisture, were fitted to an IG curve. Parameters of the fitted curve such as functional depth, distance to the inflection point and area under the curve were then used as predictors in a multi-regression analysis to quantify the effect of soil salinity and SMC on soil spectra. The results suggest that a combination of salt and moisture in soil causes anomalies and therefore variations in neither salt nor moisture contents can be modelled accurately on the basis of quantification of soil reflectance. These results suggest that further studies are required to determine a set of calibrating coefficients that can be used to eliminate the background spectral effects caused by either soil salinity or SMC.     

Recent Developments for Prediction of Power of Aromatic and Non‐Aromatic Energetic Materials along with a Novel Computer Code for Prediction of Their Power

The explosive power or strength of an energetic material shows its capacity for doing useful work. This work reviews recent developments for prediction of power of energetic compounds. A new user‐friendly computer code is also introduced to predict the relative power of a desired energetic compound as compared to 2,4,6‐trinitrotoluene (TNT). It is based on the best available methods, which can be used for different types of energetic compounds including nitroaromatics, nitroaliphatics, nitramines, and nitrate esters. The computed relative powers are consistent with the measured data for some new materials containing complex molecular structures.     

Modeling of modified airlift loop reactor with a concentric double-draft tube

In this work, mathematical modeling based on the tanks-in-series model was employed to characterize the performance of a novel modified airlift loop reactor. Liquid mixing characteristics, i.e., mixing time and circulation time, were employed to describe the performance of the proposed reactor. These values were determined by using the classical tracer response technique in a column 18.5 cm in diameter and 90 cm in height, and two concentric draft tubes 14 and 8.5 cm in diameter and 80 cm in height. Matlab 7.1 software was used to solve the model equations in the Laplace domain and determine the model parameter. A comparison between the numerical solution and experimental data showed that the applied model can accurately describe the behavior of a modified airlift reactor. Experimental results in the homogeneous bubble flow regime showed that the proposed airlift reactor configuration with a double-draft tube significantly improves the liquid mixing quality compared to a conventional concentric-tube airlift reactor with an identical operating volume. By using this high-performance reactor, the mixing and circulation times can be reduced by up to 48.3% and 35.5%, respectively.     

Studies of carbonaceous species in alkali promoted iron catalysts during Fischer–Tropsch synthesis

The effects of La, Mg and Ca promoters on carbonaceous surface and bulk iron carbide species formed in the alkali promoted iron catalysts are studied under realistic Fischer–Tropsch synthesis (FTS) conditions. Compositions of bulk iron phase and phase transformations of carbonaceous species during pretreatment and FTS reaction were characterized using the temperature-programmed surface reaction with hydrogen (TPSR-H₂) and XRD techniques. Many carbonaceous species on surface and bulk were qualitatively and quantitatively identified by combined TPSR-H₂ and XRD spectra of the alkali promoted iron catalyst. These species, sorted by the their reactivity with H₂ from high to low, were recognized as (a) adsorbed, atomic carbon; (b) amorphous, lightly polymerized hydrocarbon or carbon surface species; (c) bulk carbides and (d) disordered and moderately ordered graphitic surface carbons. The results revealed that while the surface basicity of the iron catalyst increased the CO dissociation proceeds faster than carbon hydrogenation. This phenomenon leads to excessive carbon deposition and formation of inactive iron carbide phases and graphitic type carbonaceous surface species, and consequently leads to catalyst deactivation.     

AZ31-O镁合金和6061-T6铝合金搅拌摩擦焊接头的显微组织和力学性能(英文)

对3 mm厚的AZ31-O镁合金板和6061-T6铝合金板进行异种材料搅拌摩擦焊。实验中搅拌针的旋转速度为600~1400 r/min,前进速度为20~60 mm/min。结果表明,在旋转速度1000 r/min、前进速度40 mm/min的工艺条件下,可以获得无缺陷的焊接接头。组织观察发现搅拌区的晶粒尺寸要比基材区的明显小很多。在搅拌区形成了复杂的金属流动。显微硬度测试表明搅拌区的硬度分别是不均匀的。拉伸实验结果表明,接头的拉伸强度约为基材AZ31镁合金的76%,或6061铝合金的60%。接头拉伸断口SEM形貌观察表明为脆性断裂。     

A comparative study using direct hydrothermal and indirect fusion methods to produce zeolites from coal fly ash utilizing single-mode microwave energy

This paper investigates the effects of microwave irradiation on the synthesis of zeolite Na-A from coal fly ash at atmospheric pressure. Microwave irradiation has shown to accelerate zeolitization from several hours to several minutes. A single-mode laboratory-scale microwave was employed, which enabled control of irradiated power and temperature of the reaction mixture, while the pressure was controlled by affixing a condenser on the 40 mL Teflon reactor vessel with a working volume 20 mL. Design of Experiment was used to compare two methods of converting CFA to zeolite-A, direct hydrothermal method and indirect fusion method. Experiments conducted were two level four factorial designs. The first factor considered was the categorical factor of conversion method (hydrothermal vs fusion), while the other three factors investigated were power (P), time (θ), and aluminate concentration (δ). Zeolite produced from CFA (CFAZA) was characterized using XRD, FTIR, SEM, TGA, BET, and cation exchange capacity. It was observed that the crystallinity of the product was influenced by factors such as, conversion method, power, time, and aluminate concentration. The hydrothermal and fusion products were comparable to each other in their characteristics, however, hydrothermal CFAZA performed better at immobilizing heavy metal ions and showed better crystalline structure, whereas fusion CFAZA had a higher BET surface area and a slightly higher CEC. Regardless of the performance of the categorical factors the other factors, i.e., power, time, and aluminate concentration followed the same trend for both types of CFAZA.     

Analytical modeling of strength in randomly oriented PP and PPTA short fiber reinforced gypsum composites

Fiber reinforced gypsum are prevalent building materials in which short fibers with high tensile strength are embedded into a gypsum matrix to produce supplemental strong and lightweight construction materials. Due to confrontation to a rising risk of death and economic disaster in earthquake-prone areas, quake-resistant materials and structures should be employed for building constructions. Gypsum based composites as a unique candidate for this purpose reduce the risks and produce much confident construction materials for residential buildings. In this work tensile strength of gypsum composites with different volume fraction of polypropylene (PP) and poly-paraphenylene terephthalamide (PPTA) fibers up to 15% were studied. Stress transfer ability from matrix to fibers were analyzed using theoretical shear lag analyses, scanning electron microscope, and pull out tests. The interfacial characteristics were also studied by scanning electron microscope (SEM). The ability of the composites to withstand against longitudinal tensile load was also studied by tensile tests of dog-bone shaped, random oriented fiber reinforced gypsum. Tensile strength of randomly oriented short fiber reinforced gypsum was evaluated by a mathematical model. The obtained results from the model and experimental results have been compared and discussed.     

Formulation and Characterization of Human Milk Fat Substitutes Made from Blends of Refined Palm Olein,and Soybean,Olive, Fish,and Virgin Coconut Oils

The simplest and the most cost-effective way of human milk fat substitute (HMFS) production is formulating of suitable vegetable oils at proper ratios. To do this, the D-optimal mixture design was used to optimize the HMFS formulation. The design included 25 formulations made from refined palm olein (35–55%), soybean oil (5–25%), olive oil (5–20%), virgin coconut oil (5–15%), and fish oil (0–10%). Samples were produced in laboratory and characterized in terms of fatty acid and triacylglycerol (TAG) compositions, free fatty acid content, peroxide value, iodine value, and oxidative stability index (OSI). HMFS samples were also compared with Codex Alimentarius (CA) and Iran National Standards Organization (INSO) standards. Each characteristic of HMFS samples was then expressed as a function of ingredient ratio using regression models. Finally, using numerical optimization, four optimized blends (PB₁-PB₄) were selected, made in the laboratory (HMFS₁-HMFS₄), characterized, and compared with CA and INSO standards. The properties of all the optimized blends (except the palmitic acid content of HMFS₂ and the monounsaturated fatty acid [MUFA] content of HMFS₃) met the standards. HMFS₄ showed the highest OSI in Rancimat and the lowest oxidation rate in Schaal oven tests. POL (19.53–21.73%), PPO (20.77–21.73%), OOO (9.11–11.16%), and OPO (8.84–9.46%) were the main (totally about 60%) TAG species found in HMFS samples. In conclusion, the HMFS₄ formula (55% palm olein, 13.5% soybean oil, 16% refined olive oil, 15% virgin coconut oil, and 0.5% fish oil) was suggested as the best formula for HMFS production.