Unilateral digital clubbing in a hemodialysis patient

We present an unusual case of a chronic hemodialysis patient with moderate diffuse acrocyanosis and prominent unilateral clubbing of his right hand fingers, with classic physical features of hypertrophic osteoarthropathy. The patient's left hand, which had a functioning arteriovenous fistula, did not show any evidence of clubbing. We briefly discuss the different theories in regards to the pathogenesis of clubbing, and the potential role of arteriovenous fistula in preventing its occurrence.     

Effect of lignin removal on mechanical,thermal, and morphological properties of polylactide/starch/rice husk blend used in food packaging

The aim of this work was to investigate the possibility of using cost‐effective natural filler in a biodegradable polymer and find new set of materials for green biocomposites to be used in food packaging. In this regard, rice husk (RH) and bleached rice husk (BRH) have been used in the form of powder and the effect of lignin removal on mechanical and thermal properties of prepared composites with poly(l ‐lactide) and starch were studied. Using FTIR technique, the lignin removal from RH has been approved. The tensile, charpy impact, and hardness tests were implemented to investigate the mechanical properties. It was concluded that filler caused increase both in the toughness and the Young modulus of samples. It was also found that the lack of lignin in BRH samples improves the mechanical properties. It was clearly observed that the BRH samples show larger modulus, charpy impact strength, and hardness compared to those filled with RH. Despite larger values for the elongations at break of RH samples, the mechanical properties showed a significant improvement (between 25 and 50% improvements) on lignin removal. The differential scanning calorimetry thermograms revealed an improvement in crystallization behavior and reduction of T_g from 47 to 31°C in the case of BRH‐filled samples. Finally, due to the removal of toxic lignin in the samples and modification of mechanical properties by this method, the BRH could have the ability of wide use in the bioplastics and food packaging industries. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41095.     

Simulation of Construction of Cable-Stayed Bridges

Construction of cable-stayed bridges involves major changes in configuration of the structure with the addition and removal of structural components to the partially constructed structure. At every stage of construction, it is necessary to have sufficient information about the existing partial structure as-built, to verify the requirements called for in the construction guidelines and to investigate the effects of possible modifications in the construction procedures. The final stresses and deformations in the completed structure are strongly dependent on the sequence of events during the construction and the erection procedure used. Therefore, analysis of the actual construction sequence is an important first step in any analysis of the performance of the bridge under external loads. In this paper a general methodology for construction sequence simulation of cable-stayed bridges is presented, and stage-by-stage construction of an actual bridge is simulated. The objective of the simulation is to evaluate short-term and long-term influences of the construction sequence on the structural integrity of the cable-stayed bridge. Comparisons are presented between results from the present analysis, conventional procedures, and the actual field measurements.     

Effect of ultrasound radiation on the size and size distribution of synthesized copper particles

The effect of ultrasound radiation on the size and size distribution of synthesized copper particles was investigated under various concentrations of ethylene glycol (E.G.) as a capping agent. Monodispersed copper particles were produced by the reduction of an aqueous copper (II) sulfate solution at the presence of hydrazine monohydrate. X-ray diffraction and scanning electron microscopy analysis revealed that the morphology, size, and size distribution of produced particles were influenced by the reducing agent injection rate, capping agent concentration, and sonication. Increasing the injection rate of reducing agent to an amount higher than a critical value decreases the size of copper particles and also converts the monodispersed particles to polydispersed particles. Results of using a sonifier at the reduction stage revealed that finer monodispersed copper particles can be achieved at higher injection rates related to the critical value. Increasing the concentration of E.G. as a capping agent decreases the size of copper particles, while applying ultrasound radiation along with increasing the concentration of E.G. increases the size of copper particles. Morphology of particles varies by the concentration and type of the capping agent. Higher reducing agent injection rates and the application of a sonifier at the instance of reduction result in smaller spherical particles at various capping agent concentrations.     

A new empirical model for quiescent annealing of binary co-continuous polymer blends

The high sensitivity of the morphology and final properties of co-continuous polymer blends to thermal annealing has motivated many researchers to study the evolution of their morphology during thermal annealing process. In this work, phase coarsening of a low interfacial tension polylactic acid/polycaprolactone blend and a medium interfacial tension polylactic acid/polyethylene blend during quiescent annealing was studied in detail. To this aim, characteristic length scale of the microstructure of the polymer blends was determined at different annealing times. It was found that the phase size in both blends increased linearly by time at the early stage of the annealing and then the phase coarsening rate gradually decreased at longer times. Finally, the phase size of the blends approached a finite size. The mechanisms involved in the observed phase coarsening behavior were discussed in detail. Linear and exponential phase coarsening models in the literature could not explain the observed phase coarsening behavior in the studied blends. A new empirical model was presented which showed a very good agreement with both the obtained results in this work and the previous experimental data in the literature. The obtained results indicate the significant potential of the new model in analyzing phase coarsening behavior of co-continuous polymer blends.

     

The creation of a novel fluorescent protein by guided consensus engineering

Consensus engineering has been used to increase the stability of a number of different proteins, either by creating consensus proteins from scratch or by modifying existing proteins so that their sequences more closely match a consensus sequence. In this paper we describe the first application of consensus engineering to the ab initio creation of a novel fluorescent protein. This was based on the alignment of 31 fluorescent proteins with >62% homology to monomeric Azami green (mAG) protein, and used the sequence of mAG to guide amino acid selection at positions of ambiguity. This consensus green protein is extremely well expressed, monomeric and fluorescent with red shifted absorption and emission characteristics compared to mAG. Although slightly less stable than mAG, it is better expressed and brighter under the excitation conditions typically used in single molecule fluorescence spectroscopy or confocal microscopy. This study illustrates the power of consensus engineering to create stable proteins using the subtle information embedded in the alignment of similar proteins and shows that the benefits of this approach may extend beyond stability.     

Analysis of Partial Volume Effects on Accurate Measurement of the Hippocampus Volume

Hippocampal volume loss is an important biomarker in distinguishing subjects with Alzheimer’s disease(AD)and its measurement in magnetic resonance images(MRI)is influenced by partial volume effects(PVE).This paper describes a post-processing approach to quantify PVE for correction of the hippocampal volume by using a spatial fuzzy C-means(SFCM)method.The algorithm is evaluated on a dataset of 20 T1-weighted MRI scans sampled at two different resolutions.The corrected volumes for left and right hippocampus(HC)which are 23%and 18%for the low resolution and 6%and 5%for the high resolution datasets,respectively are lower than hippocampal volume results from manual segmentation.Results show the importance of applying this technique in AD detection with low resolution datasets.     

Beam shaping design for coupling high power diode laser stack to fiber

A beam shaping technique that rearranges the beam for improving the beam symmetry and power density of a ten-bar high power diode laser stack is simulated considering a stripe mirror plate and a V-Stack mirror in the beam shaping system. In this technique, the beam of a high power diode laser stack is effectively coupled into a standard 550 μm core diameter and a NA=0.22 fiber. By this technique, compactness, higher efficiency, and lower cost production of the diode are possible.