Synchrotron radiation investigations of the Sr2MgSi2OT：Eu^2＋,R^3＋ persistent luminescence materials

The electronic and defect energy level structure of polycrystalline Sr₂MgSi₂O₇:Eu²⁺,R³⁺ persistent luminescence materials were studied with thermoluminescence and different synchrotron radiation spectroscopies (UV-VUV emission and excitation, X-ray absorption near-edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS)). Special attention was paid on the effect of the R³⁺ co-dopants on the persistent luminescence properties of the materials. Theoretical calculations using the density functional theory (DFT) were carried out simultaneously with the experimental work. The experimental band gap energy (E_g) value of ca. 7.1 eV agreed very well with the DFT value of 6.7 eV. The variation of the E_g value was attempted to relate with the trap structure as well as with the different properties of the R³⁺ co-dopants. The trap level energy distribution depended strongly on the R³⁺ co-dopant except for the shallowest trap energy above the room temperature remaining practically the same, however. The different processes in the mechanism of persistent luminescence from Sr₂MgSi₂O₇:Eu²⁺,R³⁺ were assembled and their contributions discussed.     

Properties and Stability of Mining-Induced Meromixis in Two Small Boreal Lakes in Eastern Finland

Mine waters are a significant point source stressor for aquatic environments, not only due to their acidity and high metal concentrations, but also because of their high electrolyte concentrations. Ion-rich mine waters can disturb the seasonal mixing of lake waters, even leading to permanent stratification, i.e. meromixis. In this study, we investigated two small natural lakes receiving waters from closed Ni-Cu mines. To characterize the present chemical and physical conditions of these two boreal lakes, we collected water samples and in-situ water column measurements seasonally in 2017 and 2018. We modelled the stability of meromixis in the lakes under varying physico-chemical and meteorological conditions with the MATLAB-based open-source model code, MyLake. Chemical analyses and water column measurements show that both lakes are currently meromictic with a chemocline separating the circulating, well-oxygenated upper water from the non-circulating, hypoxic bottom water. The main anion was SO₄ in both lakes, while the main cations were Ca, Mg, Na, and K. Elevated concentrations of conservative elements flowing from the mine areas are crucial in maintaining the meromixis. Modelling scenarios suggest that the meromixis would be sustained for several decades even if the external load ceased completely. Lake morphology and sheltered surroundings also seem to contribute to maintaining the meromixis in these lakes. Consequently, our results indicate that small headwaters are sensitive to persistent meromixis even when external loading is mild.

     

Miscibility,morphology and mechanical properties of rubber‐modified biodegradable poly(ester‐urethanes)

Biodegradable, lactic acid based amorphous poly(ester‐urethane)s (PEU) were modified with poly(L‐lactic acid‐co‐ϵ‐caprolactone‐urethane) elastomer (P[LA/CL]U) by melt blending. The phase separation of P(LA/CL)U elastomer with three different ϵ‐caprolactone (CL) compositions (CL content 30, 50, and 70 mol %) and the mechanical properties of the resulting impact‐modified linear and branched PEU were investigated. The amounts of P(LA/CL)U elastomer in the PEU blends were 10, 15, 20, and 30 wt %. Dynamic mechanical thermal analysis (DMTA) of the blends with P(LA50/CL50)U and P(LA30/CL70)U elastomers revealed separate glass transition temperatures for rubber and matrix, indicating phase separation. No phase separation was found for P(LA70/CL30)U elastomer. The effect of mixing rate and temperature during processing on composite properties was tested by blending P(LA30/CL70)U rubber with PEU under various processing conditions. Impact modification studies were also made with two P(LA30/CL70)U elastomers having different amounts of functional groups. The influence of end‐functionalization and cross‐linking on mechanical properties was investigated in blends containing PEU and 15 wt % of these elastomers. Scanning electron microscopy (SEM) showed the morphology to change dramatically with increase in the degree of cross‐linking in the rubber. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1074–1084, 2000     

Prevalence and genetic diversity of Listeria monocytogenes in the tonsils of pigs

This study was set up to establish the prevalence of Listeria monocytogenes in the tonsils of sows and fattening pigs from five Finnish slaughterhouses and to evaluate the genetic similarity of L. monocytogenes strains isolated from the tonsils. A total of 271 pig tonsils (132 tonsils from fattening pigs and 139 from sows) from five different slaughterhouses in various parts of Finland were studied from June 1999 to March 2000. Overall, 14 and 4% of pig tonsils harbored L. monocytogenes and Listeria innocua, respectively. The prevalence of L. monocytogenes in tonsils of fattening pigs (22%) was significantly higher than in sows (6%). The isolates (n = 38) recovered from tonsils showed a wide genetic diversity by means of 24 different pulsed-field gel electrophoresis (PFGE) types presented by the strains. Moreover, in numerical analyses of restriction patterns, no association was found between the clustering of strains and the slaughterhouses, and strains showing a similar PFGE type were recovered from pigs of different slaughterhouses. The high prevalence of L. monocytogenes showing various PFGE types in the tonsils of pigs could indicate a potential source of contamination of pluck sets, carcasses, and the slaughterhouse environment and of subsequent processing steps.     

Fatty Acid Fingerprints and Hyaluronic Acid in Extracellular Vesicles from Proliferating Human Fibroblast-like Synoviocytes

Extracellular vesicles (EVs) function as conveyors of fatty acids (FAs) and other bioactive lipids and can modulate the gene expression and behavior of target cells. EV lipid composition influences the fluidity and stability of EV membranes and reflects the availability of lipid mediator precursors. Fibroblast-like synoviocytes (FLSs) secrete EVs that transport hyaluronic acid (HA). FLSs play a central role in inflammation, pannus formation, and cartilage degradation in joint diseases, and EVs have recently emerged as potential mediators of these effects. The aim of the present study was to follow temporal changes in HA and EV secretion by normal FLSs, and to characterize the FA profiles of FLSs and EVs during proliferation. The methods used included nanoparticle tracking analysis, confocal laser scanning microscopy, sandwich-type enzyme-linked sorbent assay, quantitative PCR, and gas chromatography. The expression of hyaluronan synthases 1–3 in FLSs and HA concentrations in conditioned media decreased during cell proliferation. This was associated with elevated proportions of 20:4n-6 and total n-6 polyunsaturated FAs (PUFAs) in high-density cells, reductions in n-3/n-6 PUFA ratios, and up-regulation of cluster of differentiation 44, tumor necrosis factor α, peroxisome proliferator-activated receptor (PPAR)-α, and PPAR-γ. Compared to the parent FLSs, 16:0, 18:0, and 18:1n-9 were enriched in the EV fraction. EV counts decreased during cell growth, and 18:2n-6 in EVs correlated with the cell count. To conclude, FLS proliferation was featured by increased 20:4n-6 proportions and reduced n-3/n-6 PUFA ratios, and FAs with a low degree of unsaturation were selectively transferred from FLSs into EVs. These FA modifications have the potential to affect membrane fluidity, biosynthesis of lipid mediators, and inflammatory processes in joints, and could eventually provide tools for translational studies to counteract cartilage degradation in inflammatory joint diseases.     

Development of separation technology for the removal of radium-223 from targeted thorium conjugate formulations. Part II: purification of targeted thorium conjugates on cation exchange columns

Tumor targeting pharmaceuticals will play a crucial role in future pharma pipelines. The targeted thorium conjugate (TTC) therapeutic platform could provide real benefit to patients, whereby targeting moieties like monoclonal antibodies are radiolabelled with the alpha-emitting radionuclide thorium-227 (²²⁷Th, t_1/2?=?18.7?days). A potential problem could be the accumulation of the long-lived daughter nuclide radium-223 (²²³Ra, t_1/2?=?11.4?days) in the drug product during manufacturing and distribution. Therefore, the level of ²²³Ra must be standardized before administration to the patient. The focus in this study has been the removal of ²²³Ra, as the other progenies will have a very limited stay in the formulation. In this study, the purification of TTCs labeled with decayed ²²⁷Th has been explored. Columns packed with a strong cation exchange resin have been used to sequester ²²³Ra. The separation of TTC from ²²³Ra has been evaluated as influenced by both formulation and process parameters with a design of experiments (DOE) study; including citrate or acetate buffer, pH, buffer concentration, presence or absence of pABA?+?EDTA, resin amount and sodium chloride concentration. The aim was to achieve a separation with high sorption of ²²³Ra and accompanying low TTC sorption. The results were analyzed by multivariate analysis. Four regression models of TTC and ²²³Ra sorption from citrate and acetate buffered formulations were developed. The predictive accuracy of sorption in the four statistical models was given by standard deviations and confidence intervals. The TTC sorption in citrate and acetate buffered formulations was affected by the identical variables and the variation in TTC sorption was comparable for the two models. However, the DOE variables had a significantly stronger impact on the ²²³Ra sorption in citrate buffered formulations than the ²²³Ra sorption in acetate buffer. An optimal separation with a TTC sorption below 25% and ²²³Ra sorption above 90% can be achieved in both citrate and acetate buffered formulations. Stability studies of radiochemical purity (RCP) indicated that the measured ²²⁷Th values may be partly due to free ²²⁷Th and not TTC, but the results indicate that TTC stability may be controlled by optimizing formulation parameters. Hence, the sorption data and the regression models presented must be reviewed and further explored with regard to what is known about the stability of the TTC in the different buffered formulations.     

Frequency-converted dilute nitride laser diodes for mobile display applications

We demonstrate a 1240-nm GaInNAs multi-quantum well laser diode with an integrated saturable electro-absorber whose wavelength is converted to 620 nm. For conversion, we used a MgO:LN nonlinear waveguide crystal with an integrated Bragg grating in direct coupling configuration. Broadened visible spectral width and reduced speckle as well as a high extinction ratio between the below and above threshold powers were observed in passively triggered pulsed operation with smooth direct current modulation characteristics. The demonstration opens a new avenue for developing 620-nm semiconductor lasers required for emerging projection applications.     

Corpus-based vocabulary lists for language learners for nine languages

We present the KELLY project and its work on developing monolingual and bilingual word lists for language learning, using corpus methods, for nine languages and thirty-six language pairs. We describe the method and discuss the many challenges encountered. We have loaded the data into an online database to make it accessible for anyone to explore and we present our own first explorations of it. The focus of the paper is thus twofold, covering pedagogical and methodological aspects of the lists’ construction, and linguistic aspects of the by-product of the project, the KELLY database.