Effects of silane and the lowering of pH on the properties of phenol–formaldehyde resol resins and resin coatings

Phenol–formaldehyde resol resins were modified by the addition of silane (3‐aminopropyltriethoxysilane) and the lowering of pH (formic acid). The effects of the modifications on the properties of the resins during storage were studied through comparison with the parent resins and by viscosity measurements, NMR spectroscopy, ultraviolet–visible spectroscopy, and differential scanning calorimetry. Resin coatings on paper were prepared to determine the influence of discoloration of the resin solution on the color of the cured resin. A decrease in the pH of the NaOH‐catalyzed resin solutions lightened the color of the solutions and corresponding coatings, whereas silane additions made the coatings slightly more yellow. The lowering of pH increased the viscosities and decreased the reactivities of the resin solutions compared with the unmodified reference resins during storage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1933–1941, 2007     

Coherent Out‐of‐Core Point‐Based Global Illumination

We describe a new technique for coherent out‐of‐core point‐based global illumination and ambient occlusion. Point‐based global illumination (PBGI) is used in production to render tremendously complex scenes, so in‐core storage of point and octree data structures quickly becomes a problem. However, a simple out‐of‐core extension of a classical top‐down octree building algorithm would be extremely inefficient due to large amount of I/O required. Our method extends previous PBGI algorithms with an out‐of‐core technique that uses minimal I/O and stores data on disk compactly and in coherent chunks for later access during shading. Using properties of a space‐filling Z‐curve, we are able to preprocess the data in two passes: an external ID‐sort and an octree construction pass.     

Publication patterns in the social sciences and humanities: evidence from eight European countries

Scientometrics - The increasing number of open-access full-text scientific documents promotes the transformation from metadata- to content-based studies, which is more detailed and semantic. Along...     

Oxidation of accident tolerant fuel candidates

In this study, the oxidation of various accident tolerant fuel candidates produced under different conditions have been evaluated and compared relative to the reference standard – UO₂. The candidates considered in this study were UN, U₃Si₂, U₃Si₅, and a composite material composed of UN–U₃Si₂. With the spark plasma sintering (SPS) method, it was possible to fabricate samples of UN with varying porosity, as well as a high-density composite of UN–U₃Si₂?(10%). Using thermogravimetry in air, the oxidation behaviors of each material and the various microstructures of UN were assessed. These results reveal that it is possible to fabricate UN to very high densities using the SPS method, such that its resistance to oxidation can be improved compared to U₃Si₅ and UO₂, and compete favorably with the principal ATF candidates, U₃Si₂, which shows a particularly violent reaction under the conditions of this study, and the UN–U₃Si₂?(10%) composite.     

Unruly Representation: Materiality,indexicality and agency of the photographic trace

This article examines photographic representation as a material and indexical trace caused by photons reflected and/or emitted from the photographed objects. It argues that the contested idea of indexicality remains relevant to the photograph despite the digitalization of the photographic process. It also suggests that the trace works as an affordance which renders ambiguous the photographic representation as re-presentation. The material trace provides an anchorage point for the presence of the photographed objects. However, the very same presence destabilizes the photograph’s function as a representation and renders its status controversial. Therefore, the photograph both is and is not a representation. As a much-celebrated guarantee of photographic truth, the trace works, in fact, as an element of perpetual epistemological controversy and also as an affordance for philosophical, ontological and poetic analysis.     

Stable linker peptides for a cellulose-binding domain-lipase fusion protein expressed in Pichia pastoris

Fusion proteins composed of a cellulose-binding domain fromNeocallimastix patriciarum cellulase A and Candida antarcticalipase B were constructed using different linker peptides. Theaim was to create proteolytically stable linkers that were ableto join the functional modules without disrupting their function.Six fusion variants containing linkers of 4–44 residueswere expressed in Pichia pastoris and analysed. Three variantswere found to be stable throughout 7-day cultivations. The cellulose-bindingcapacities of fusion proteins containing short linkers wereslightly lower compared with those containing long linkers.The lipase-specific activities of all variants, in solutionor immobilized on to cellulose, were equal to that of the wild-typelipase.     

Effect of structure modification on rheological properties of biodegradable poly(ester‐urethane)

Biodegradable lactic acid based poly(ester‐urethanes) (PEU) were polymerized and their structure and rheological properties were characterized. The polymerization process comprised two steps: lactic acid monomer was oligomerized to low molecular weight prepolymer, and this was then linked to high molecular weight PEU with chain extender, 1,6‐hexamethylene diisocyanate. The properties of PEU were modified by varying the amount of chain extender from 1.05:1 to 1.35:1 (NCO/OH ratio). The modification was mostly seen in the molecular weight distribution of the polymers, which was broadened from 2.2 to 3.5 as the amount of chain extender was increased. The telechelicity of the prepolymer was found to play an essential role in successful linking of the prepolymer units. In addition, the rheological properties of poly(ester‐urethane) were determined with capillary and dynamic rheometers. All PEU samples were pseudoplastic and broadening of their molecular weight distribution was accompanied by increased viscosity and complex viscosity at low shear rates and increased shear thinning. The temperature dependency of the measurement was pronounced. Rheological measurements also showed that PEU starts to degrade at 100°C and further rise in temperature increases the rate of degradation significantly.     

Wetting behaviour and direct observation of thermally responsive polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene electrospun fibres in aqueous environment

Electrospun fibres of thermally responsive triblock copolymer polystyrene‐block‐poly(N‐isopropylacrylamide)‐block‐polystyrene were prepared. Fibre morphology and swelling were studied below and above the lower critical solution temperature of poly(N‐isopropylacrylamide) (PNIPAM) using cryo‐electron microscopy. Cryo‐transmission electron microscopy showed that the fibre diameter increased up to 150% after immersion in water at 20 °C. In contrast, at 45 °C the fibre diameter increased considerably less. The sessile drop technique was used to characterize temperature‐dependent wetting of fibre mats. Contact angle (θ_CA) measurements revealed that a block copolymer fibre mat changed from hydrophobic (θ_CA > 90°) to hydrophilic (θ_CA < 90°) state within seconds after applying a water droplet on it at 20 °C. At 40 °C the initial contact angle was measured to be higher (135°) and it decreased much less than at 20 °C during the first minute of measurement. We observed using scanning electron microscopy that the electrospun fibres of the block copolymer having 77 wt% of PNIPAM lost their cylindrical shape and changed from fibres to thin sheets at both 20 and 40 °C within seconds after applying water on the fibres. Fibres having 55 wt% of PNIPAM were observed to be stable in water at both 20 and 40 °C, which resulted, surprisingly, in fibre mats with the strongest effects on thermally sensitive wetting. We discuss the surprising results and the implications that the evolution of fibre surface roughness has on the long‐term wetting behaviour, demonstrating a self‐adaptable hydrophilicity/hydrophobicity nature of the fibre mats. © 2013 Society of Chemical Industry     

Novel two‐stage phenol–formaldehyde resol resin synthesis

The synthesis of phenol–formaldehyde resol resins was carried out in two stages to facilitate the start of a conventional batch process. In the first stage, the starting material solution was preprocessed in a continuous‐flow stirred‐tank reactor with a 5‐min residence time. In the second stage, synthesis was continued in a batch reactor. Samples were analyzed by titrimetric methods, gas chromatography, nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. Most of the starting materials were consumed in the preprocessing reactor, which allowed better control of the reactivity of the prepolymer solution in the second stage. The methylolation and condensation reactions proceeded steadily during the production process in the batch reactor. The results of the study indicated that dividing a conventional one‐stage batch process into two stages could facilitate the control of the initial stages of resol production. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:371–379, 2007