Gas-phase synthesis of l-leucine-coated micrometer-sized salbutamol sulphate and sodium chloride particles

Coating of micrometer-sized particles of salbutamol sulphate or sodium chloride with the amino acid l-leucine in the gas phase is described. A novel method to synthesize core particles and coat them with l-leucine simultaneously was carried out in an aerosol flow reactor. The coating was prepared via temperature-induced heterogeneous nucleation of l-leucine vapor on the 0.6-1.0 µm core particles, and subsequent growth of l-leucine crystals by physical vapor deposition. The core salbutamol particles were amorphous, whereas the NaCl core particles were crystalline. The l-leucine sublimation that took place at 140-195 °C depended on the identity of the core material due to (i) molecular interaction and (ii) phase mixing. The former was dominant with salbutamol/l-leucine particles and the latter was dominant with NaCl/l-leucine particles. During the vapor deposition, l-leucine formed a discontinuous coating layer of leafy-looking crystallites, with sizes from a few nanometers to hundreds of nanometers, pointing out from the core particle surface. The l-leucine deposition properties depended on the core morphology: l-leucine crystallites were distributed more evenly on salbutamol core surfaces than on salt core surfaces, where the crystallites were localized mainly on edges. The stability of coated salbutamol particles was retained during storage under humid conditions.     

Atomistic modelling of the Fe-Cr-C system

For the purpose of modelling the impact of carbon on radiation damage phenomena in steels, we have performed an extensive set of first principle calculations on the Fe-Cr-C system. The calculated solution and diffusion enthalpies of carbon in iron and in chromium agree well with experimental data, as do the relative formation energies of mono-carbides, cementite, Hägg and M₂₃C₆ carbides. Our data further indicate that interstitial carbon is attracted to a solute iron atom in bcc chromium, while the reaction between carbon and a solute chromium atom in bcc iron is repulsive. An empirical potential fitted to data for iron carbides is capable of reproducing melting behaviour of cementite, while the predicted interaction with point defects agrees less well with DFT data than a potential recently published by Hepburn and Ackland.     

Chemical and physical properties of short rotation tree species

The European Union’s growth strategy (Europe 2020) requires reductions in greenhouse gas (GHG) emissions and increases in both renewable energy sources and energy efficiency. Short rotation forestry (SRF) has achieved greater awareness due to these targets. Short rotations (1–12 years), rapid growth and the ability to coppice are typical for SRF. Salix, Populus, Alnus and Betula have smaller GHG emissions of biomass production than annual agricultural plant species, since management and harvesting are not needed every year. Physicochemical properties of these species must be known when their utilisation is planned and optimised. Seven tree species were studied: three willows (Salix myrsinifolia, Salix schwerinii and Klara), one aspen (Populus tremula), one alder (Alnus glutinosa) and two birches (Betula pendula and Betula pubescens). One stem wood (S) sample and one stem wood and bark (SB) sample of each tree were investigated. Furthermore, seven surface soil samples and four incineration ash samples (two S. myrsinifolia and two S. schwerinii) were also studied. Heating values, densities, ash contents as well as carbon, hydrogen and nitrogen contents of all short rotation biomass samples were usually quite typical for the corresponding tree species. Additional observations included the accumulation of cadmium in willow and aspen samples, small chloride content values, and higher ash- and element contents in SB samples than in the corresponding S samples. Nutrient content of ash was usually higher in the S sample, contradictory to biomass samples, and finally the cadmium content of the ash samples was very high.     

Performance analysis of power generating sludge combustion plant and comparison against other sludge treatment technologies

Expectations on wastewater sludge treatment and recovery of its energy and material contents are increasing because of the tightening legislation and the obligation to reduce environmental impacts of sludge disposal. The objective of this study was to analyze the performance of a heat and power generating sludge combustion plant from technical and economical viewpoints and to compare the studied concept to optional sludge treatment technologies. The plant performance was modeled for sewage sludge produced by approximately 200,000 inhabitants. Two plant sizes below 1000 kWe range were investigated, the smaller plant using sludge as the only fuel and the larger plant with wood chips as the additional fuel. The plants were compared with heat-only plants of similar size. The payback periods for heat-only plants are typically shorter than with the cogenerating plants because the changes in plant investment affect stronger the economy than do the revenues from selling electricity. The gate fee of sludge treatment has the strongest effect on the payback period. The selection of the plant concept (cogeneration, heat only or pure electricity generation) is, however, affected more by the local demand of heat and electricity than pure economy. The selection of the optimal technology for sludge treatment is a complicated task. The studied concept can be the optimal choice, for example, if there is no cement kiln or co-combustion possibility near the source of sludge, if there is no land enhancement demand for the digested sludge, or if the energy surplus from combustion compared to anaerobic digestion is considered more valuable than nutrient recovery possibility from digestion. If the new technology concept is found competitive, it still has to meet the challenge of acceptability from the business, social and cultural points of view.     

Susceptibility of Listeria monocytogenes strains to disinfectants and chlorinated alkaline cleaners at cold temperatures

Minimal inhibitory concentration (MIC), suspension and biofilm tests were used in evaluating the disinfecting efficacy of eight commercially available disinfectants and four chlorinated alkaline cleaners against 10 strains of Listeria monocytogenes at refrigerated temperatures. The adaptive response and cross-adaptation of L. monocytogenes to the disinfectants and chlorinated alkaline cleaners were investigated. The bactericidal components in the agents used were chlorine, quaternary ammonium compound (QAC), peracetic acid, ethanol and isopropanol. With some exceptions the disinfectants were efficient against the L. monocytogenes strains. One alkaline hypochlorite containing disinfectant was not efficient in the suspension and MIC tests at the lowest concentration recommended by the manufacturer. The chlorinated alkaline cleaners were effective against L. monocytogenes. A QAC-based disinfectant was found to be the least-effective agent on both glass bead-blasted polyethylene and stainless-steel surfaces. Adaptive and cross-adaptive responses of L. monocytogenes strains were observed towards the QAC-based agent, but over 2-fold increases to other agents were not observed. These results suggest that the adaptive responses of L. monocytogenes to disinfectants or chlorinated alkaline cleaners are of a minor concern.     

Ultrasonic assessment of cortical bone thickness in vitro and in vivo

In osteoporosis, total bone mass decreases and the thickness of the cortical layer diminishes in the shafts of the long bones. In this study, a simple ultrasonic in vivo method for determining the thickness of the cortical bone layer was applied, and the suitability of two different signal analysis techniques, i.e., envelope and cepstral methods, for measuring cortical thickness was compared. The values of cortical thickness, as determined with both techniques, showed high linear correlations (r ges 0.95) with the thickness values obtained from in vitro measurements with a caliper or in vivo measurements by peripheral quantitative CT (pQCT). No systematic errors that could be related to the cortical thickness were found. The in vivo accuracy of the measurements was 6.6% and 7.0% for the envelope and cepstral methods, respectively. Further, the in vivo precision for the envelope and cepstral methods was 0.26 mm and 0.28 mm, respectively. Although the results are similar for both of the techniques, the simplicity of the envelope method makes it more attractive for clinical applications. In conclusion, a simple ultrasound measurement provides an accurate estimate of the cortical bone thickness. The techniques investigated may have clinical potential for osteoporosis screening and therefore warrant more extensive clinical investigations with healthy and osteoporotic individuals.     

Low temperature thermoluminescence properties of Eu and R doped CaAl2O4

The thermoluminescence (TL) of calcium aluminate persistent luminescence materials doped with Eu²⁺ and co-doped with R³⁺ ions were studied between 20 and 325 K. The basic material, CaAl₂O₄:Eu²⁺, showed three TL bands between 150 and 300 K in the glow curve. Changing the R³⁺ co-dopant to the adjacent element in the rare earth series affects significantly the thermoluminescence intensity and even the position of the glow curve maximum. The physical effect seemed to be removing the traps since the La³⁺, Y³⁺, and Lu³⁺ ions suppressed the thermoluminescence. The Pr³⁺, Ho³⁺, and Dy³⁺ co-doping enhanced mainly the low temperature traps and these materials have an intense but relatively short persistent luminescence at room temperature. The Nd³⁺ and Tm³⁺ ions enhanced the TL bands close to room temperature and are thus the most suitable co-dopants to induce intense and long persistent luminescence. The quenching of the thermoluminescence by Sm³⁺ was concluded to be due to the presence of Sm²⁺ that removes totally the traps.     

Variation among and within mountain birch trees in foliage phenols,carbohydrates, and amino acids,and in growth ofEpirrita autumnata larvae

Leaf quality of the mountain birch (Betula pubescens ssp.tortuosa) for herbivores was studied at several hierarchical levels: among trees, among ramets within trees, among branches within ramets, and among short shoots within branches. The experimental units at each level were chosen randomly. The indices of leaf quality were the growth rate of the larvae of a geometrid,Epirrita autumnata, and certain biochemical traits of the leaves (total phenolics and individual phenolic compounds, total carbohydrates and individual sugars, free and protein-bound amino acids). We also discuss relationships between larval growth rate and biochemical foliage traits. Larval growth rates during two successive years correlated positively at the level of tree, the ramet, and the branch, indicating that the relationships in leaf quality remained constant between seasons both among and within trees. The distribution of variation at different hierarchical levels depended on the trait in question. In the case of larval growth rate, ramets and short shoots accounted for most of the explained variation. In the case of biochemical compounds, trees accounted for most of the variance in the content of total phenolics and individual low-molecular-weight phenolics. In the content of carbohydrates (total carbohydrates, starch, fructose, glucose, and sucrose) and amino acids, variation among branches was generally larger than variation among trees. Variation among ramets was low for most compounds. No single leaf trait played a paramount role in larval growth. Secondary compounds, represented by phenolic compounds, or primary metabolites, particularly sugars, may both be important in determining the suitability of birch leaves for larvae. If phenols are causally more important, genet-specific analyses of foliage chemistry are needed. If sugars are of primary importance, within-genet sampling and analysis of foliage chemistry are necessary.