Maltose hydrolysis kinetics with glucoamylase immobilized in porous glass fibers in a tubular flow reactor

Glucoamylase has been covalently immobilized in controlled pore glass fibers packed parallel to the axis of a tubular reactor. Flow kinetic studies have been carried out for a range of flow rates and substrate concentrations at 50°C and pH 4.5. Diffusion control has been found negligible with high flow rates and substrate concentrations. The apparent Michaelis constant was three orders of magnitude higher than that of the free enzyme. As flow rate and substrate concentration decrease, the extent of diffusion control increased up to a moderate degree. The immobilized glucoamylase was more stable than the free enzyme when incubated at 50°C.     

Early surgery in patients with mitral regurgitation due to flail leaflets: a long-term outcome study

BACKGROUND: The optimal timing for surgery in patients with mitral regurgitation is disputed. Because of the frequency of left ventricular dysfunction, which is difficult to predict, early surgery has been recommended, but its potential benefits have not been demonstrated. METHODS AND RESULTS: The outcomes of 221 patients (mean age, 65 +/- 13 years; 71% males) with flail leaflets diagnosed with two-dimensional echocardiography between 1980 and 1989 who were eligible for operation were analyzed. Group I comprised 63 patients who had early mitral valve surgery (within 1 month after diagnosis). Group II comprised 158 patients initially treated conservatively (80 of whom were operated on later). Group I patients were younger (P=.009), had more symptoms (P<.0001), and were more frequently in atrial fibrillation (P=.023) than group II patients. There was no difference in ejection fraction between the groups. The early surgery strategy was followed by an improved overall survival rate (P=.028) and a lower incidence of cardiovascular deaths (P=.025), congestive heart failure (P=.046), and new chronic atrial fibrillation (P=.032), as confirmed by multivariate analysis (adjusted risk ratios of 0.31, 0.18, 0.38, and 0.05, respectively; all P<.02). CONCLUSIONS: In patients with mitral regurgitation due to flail leaflets, the strategy of early surgery versus conservative management is associated with an improved long-term survival rate, decreased cardiac mortality, and decreased morbidity after diagnosis. This outcome advantage suggests that early surgery is a reasonable treatment option to be considered in low-risk candidates with repairable valves and severe mitral regurgitation.     

Accelerant‐promoted free radical polymerization of methacrylates by stabilized nitroxide unimolecular initiators: synthesis and characterization

BACKGROUND: This investigation evaluates the effectiveness of initiator adducts for living and controlled polymerization of methacrylates, crosslinking of dimethacrylates and thermal stabilities of the resulting polymers. Adducts of 2,2,6,6‐tetramethyl‐1‐piperidinyloxy with benzoyl peroxide and with azobisisobutyronitrile were prepared and evaluated as stabilized unimolecular initiators for the free radical polymerization of methacrylate monomers using sulfuric acid as catalyst. The monomers used were methyl methacrylate, triethylene glycol dimethacrylate (TEGDMA) and ethoxylated bisphenol A dimethacrylate (EBPADMA). RESULTS: Successful polymerization was achieved at 70 and 130 °C with reaction times ranging from 45 min to 120 h. The dispersity (D) of poly(methyl methacrylate) (PMMA) was 1.09–1.28. The livingness and extent of control over polymerization were confirmed with plots of M_n evolution as a function of monomer conversion and of the first‐order kinetics. The glass transition temperature (T_g) for PMMA was 123–128 °C. The degradation temperature (T_d) for PMMA was 350–410 °C. T_d for poly(TEGMA) was 250–310 °C and for poly(EBPADMA) was 320–390 °C. CONCLUSION: The initiators are suitable for free radical living and controlled polymerization of methacrylates and dimethacrylates under mild thermal and acid‐catalyzed conditions, yielding medium to high molecular weight polymers with low dispersity, high crosslinking and good thermal stability. Copyright © 2008 Society of Chemical Industry     

The effect of silicide on ESD performance of transistors

In this paper a new model for localized breakdown in NMOSTs under ESD stress is developed, which accounts for the reduced ESD strength in silicided devices. The model explains the impact of a stabilizing drain resistance on second breakdown current for both silicided and unsilicided protections.     

Oerlikon Schlafhorst：引领短纤纺纱技术

欧瑞康赐来福公司作为短纤领域的行业标杆，坚持不断创新，潜心致力于最先进纺纱和络筒设备的研发，旨在为客户提供最具经济效益的纺纱和络筒解决方案。     

Biological properties of iron oxide nanoparticles for cellular and molecular magnetic resonance imaging

Superparamagnetic iron-oxide particles (SPIO) are used in different ways as contrast agents for magnetic resonance imaging (MRI): Particles with high nonspecific uptake are required for unspecific labeling of phagocytic cells whereas those that target specific molecules need to have very low unspecific cellular uptake. We compared iron-oxide particles with different core materials (magnetite, maghemite), different coatings (none, dextran, carboxydextran, polystyrene) and different hydrodynamic diameters (20-850 nm) for internalization kinetics, release of internalized particles, toxicity, localization of particles and ability to generate contrast in MRI. Particle uptake was investigated with U118 glioma cells und human umbilical vein endothelial cells (HUVEC), which exhibit different phagocytic properties. In both cell types, the contrast agents Resovist, B102, non-coated Fe(3)O(4) particles and microspheres were better internalized than dextran-coated Nanomag particles. SPIO uptake into the cells increased with particle/iron concentrations. Maximum intracellular accumulation of iron particles was observed between 24 h to 36 h of exposure. Most particles were retained in the cells for at least two weeks, were deeply internalized, and only few remained adsorbed at the cell surface. Internalized particles clustered in the cytosol of the cells. Furthermore, all particles showed a low toxicity. By MRI, monolayers consisting of 5000 Resovist-labeled cells could easily be visualized. Thus, for unspecific cell labeling, Resovist and microspheres show the highest potential, whereas Nanomag particles are promising contrast agents for target-specific labeling.     

Prediction of cure induced warpage of micro-electronic products

Prediction of residual stresses in micro-electronic devises is an important issue. Virtual prototyping is used to minimize residual stresses in order to prevent failure or malfunction of electronic products.Already during encapsulation stresses build up due to polymerization induced shrinkage of the molding compound. Differences in coefficient of thermal expansion of the involved materials cause additional stresses during cooling down from molding to ambient temperature. Since industry is availed by reliable prediction methods, detailed material models are required. In electronic packaging, mechanical properties of most of the involved materials have constant mechanical properties. However, the viscoelastic properties of the encapsulation material depends highly on temperature and degree of cure. Reliable predictions of residual stresses require simulation models which take into account the effect of temperature and conversion level.In this paper, properties of molding compound are discussed which are relevant for the prediction of warpage of micro-electronics products. The models for the individual properties are combined to one single model suitable for finite element simulations. The numerical implementation in finite element code is not standard and is done by using user-subroutines.Validation experiments are performed in order to verify the developed material model which is done by measuring and predicting the warpage of a mold map. A Topography and Deformation Measurement (TDM) device is used to measure the deformations at elevated temperatures in a non-intrusive way such that the developed material model could be validated in a broad range of temperature.Finally, simulations are carried out with simplified material models of molding compound. The results of these simulations are compared with results obtained with the cure dependent viscoelastic model and real warpage data. From these comparisons it is concluded that for reliable prediction of warpage, the cure dependent viscoelastic model is has to be used.     

Ageing in the LHCb outer tracker: Aromatic hydrocarbons and wire cleaning

The LHCb Outer Tracker straw tubes have shown to suffer from gain loss after irradiation in the laboratory at moderate intensities. Under irradiation an insulating layer is formed on the anode wire. The ageing is caused by contamination of the counting gas due to outgassing of the plastifier di-isopropyl-naphthalene in araldite AY103-1 used at construction. This paper presents irradiation results with and without the plastifier, together with the mass spectra of the glue samples. In addition, the effects of wire heating and large currents are presented.     

Synthesis of an extremely stable ceramic in the system Si/B/C/N using 1-(trichlorosilyl)-1-(dichloroboryl)ethane as a single-source precursor

 A new material discovered in the Si/B/C/N system was found to remain in the amorphous state up to a very high temperature of 2000°C. This material, with the composition Si₂B₂N₅C₄, is the only material in this system which does not undergo any microstructural changes until such high temperatures. Furthermore, the substance shows an extremely high resistance to oxidation up to 1500°C. The synthesis of amorphous Si₂B₂N₅C₄ was achieved by using the novel single-source precursor 1-(trichlorosilyl)-1-(dichloroboryl)ethane (TSDE), which can be synthesized in high yields from inexpensive starting materials in a simple single pot reaction. Examination of the structural properties of the pyrolytic ceramic reveals a substructure consisting of tetrahedrally and trigonally-planar coordinated silicon and boron, respectively. Si-C- and B-C-bonds present in the molecular precursor could not be distinguished from Si-N- and B-N-bonds in the fully pyrolized ceramic. EDX and X-ray-diffraction showed the material to have a homogeneous elemental distribution, and no phase separation could be detected. Received: 15 August 1998 / Reviewed and accepted: 24 September 1998     

DFT studies of hydrogen storage properties of Mg0.75Ti0.25

Absorption energies of hydrogen in Mg_0.75Ti_0.25 alloys as a function of the hydrogen concentration were calculated using Density Functional Theory. Four types of structures of alloys and their hydrides including TiAl₃, ZrAl₃, AuCu₃, and segregated types of structures were considered. The stability of the configurations, and the structural and electronic bonding properties were studied. The hydrogenation properties depend highly on the structure of the alloys. The ordered alloys have very similar properties to that of pure Mg. For segregated alloys, the hydrogenation properties can be divided to Ti-like, ordered alloy-like and Mg-like from low to high hydrogen concentration. The formation energies show that for the four structures, segregated Mg_0.75Ti_0.25 is favored for alloys, whereas TiAl₃ type of Mg_0.75Ti_0.25H₂ are favored for hydrides. Therefore hydrogen induced structural rearrangement of the intermetallic structures of the Mg_0.75Ti_0.25 might occur upon hydrogen cycling. For the non-homogenous Mg-Ti-H system, further phase segregation of Ti in Mg might occur. Partial dehydrogenation with some hydrogen remaining in the Ti-rich region may improve reversibility.