Isolation of Failing Scan Cells through Convolutional Test Response Compaction

This paper describes a non-recursive fault diagnosis technique for scan-based designs with convolutional test response compaction. The proposed approach allows a time-efficient and accurate identification of failing scan cells using Gauss–Jordan elimination method.

Ethanol combustion over strontium- and cerium-doped LaCoO3 catalysts

Ce- or Sr-doped LaCoO₃ bulk perovskites were prepared by citric acid method as well as 10 wt.% of LaCoO₃ was deposited on alumina carrier stabilized with lanthanum. Properties of prepared materials were characterized by determination of surface area, acid-basic properties and XRD, XPS, TPDO₂, H₂-TPR measurements as well as catalytic activity and selectivity for ethanol combustion was tested. It was found that substitution of La in LaCoO₃ with either Sr or Ce has only small effect on its activity in ethanol combustion. Strontium inserted into LaCoO₃ structure increases basic character of the perovskite surface as well as selectivity to acetaldehyde (ACA). Substitution of La with cerium has no effect on the concentration of basic sites and does not affect the selectivity to ACA. Activity of LaCoO₃-based catalysts in ethanol combustion and their selectivity to ACA formation can be explained on the basis of the presence of both -oxygen species and sites with basic character on the material surface.

Acid-basic properties of supported LaCoO₃ are dominated by acidic character of the carrier. Results of XPS and H₂-TPR measurements of LaCoO₃ supported on La–Al₂O₃ suggest that perovskite remains in strong interaction with carrier and probably is partially decomposed. Deposition of perovskite on stabilized carrier significantly increases the rate of ethanol combustion.     

Studies on curing urethane prepolymers with aniline–formaldehyde resins

Commercial aniline–cresol–formaldehyde resin, two model aniline–formaldehyde and aniline–cresol–formaldehyde resins, and methylenedianiline have been used as curatives for NCO-terminated urethane prepolymer prepared from polyoxypropylenediol and toluene-diisocyanate. Based on viscoelastic behavior of the investigated systems and changes in their IR spectra, it has been concluded that phenolic OH groups present in aniline–cresol–formaldehyde resin do not play an important role in the curing process carried out at RT despite earlier suggestions to the contrary. The explanation for specific behavior of systems where urethane prepolymers have been cured with commercial aniline–cresol–formaldehyde resin is presumably the presence of small amount of solvent (benzyl alcohol) in that resin, which may influence the reaction kinetics.     

Potential of Telomerase in Age-Related Macular Degeneration—Involvement of Senescence,DNA Damage Response and Autophagy and a Key Role of PGC-1α

Age-related macular degeneration (AMD), the main cause of vision loss in the elderly, is associated with oxidation in the retina cells promoting telomere attrition. Activation of telomerase was reported to improve macular functions in AMD patients. The catalytic subunit of human telomerase (hTERT) may directly interact with proteins important for senescence, DNA damage response, and autophagy, which are impaired in AMD. hTERT interaction with mTORC1 (mTOR (mechanistic target of rapamycin) complex 1) and PINK1 (PTEN-induced kinase 1) activates macroautophagy and mitophagy, respectively, and removes cellular debris accumulated over AMD progression. Ectopic expression of telomerase in retinal pigment epithelium (RPE) cells lengthened telomeres, reduced senescence, and extended their lifespan. These effects provide evidence for the potential of telomerase in AMD therapy. Peroxisome proliferator-activated receptor gamma coactivator 1-alpha (PGC-1α) may be involved in AMD pathogenesis through decreasing oxidative stress and senescence, regulation of vascular endothelial growth factor (VEGF), and improving autophagy. PGC-1α and TERT form an inhibitory positive feedback loop. In conclusion, telomerase activation and its ectopic expression in RPE cells, as well as controlled clinical trials on the effects of telomerase activation in AMD patients, are justified and should be assisted by PGC-1α modulators to increase the therapeutic potential of telomerase in AMD.     

Stiffness alterations of single cells induced by UV in the presence of nanoTiO2

Nanocrystalline titanium dioxide (nanoTiO2) has been reported to generate reactive oxygen species (ROS) under UV illumination. In our studies, changes in mechanical properties of human skin fibroblasts, exposed to the oxidative stress induced in the presence of nanoTiO2 and UV light, were studied using atomic force microscopy (AFM). The exposure of cells to the action of ROS was performed at low TiO2 concentration (4 microg/mL) and under illumination with low-intensity UVA (8 and 20 mW/cm2) or UVC (0.1 mW/ cm2). AFM measurements of the cell stiffness were carried out immediately after exposure of cells to the oxidative stress. The data suggest that under illumination with low-intensity UVA nanoTiO2 generates ROS, which, in turn, damage cellular and subcellular structures. This process was detected by AFM as a marked drop in the cellular stiffness of ca. 30-75%, which occurred rapidly, in the time frame of 1 min. The photo-oxidative stress inducing the decrease of cell stiffness was cancelled in the presence of a well-established antioxidant, beta-carotene. The results highlight the sensitivity of AFM to detect early changes in mechanical properties of cells exposed to oxidative stress.     

Preparation and characterization of potassium, rubidium and ammonium tetrachlorouranate(III) trihydrates

The synthesis and characterization of a new series of hydrated uranium(III) complex chlorides of the general formula M¹UCl₄-3H₂O (M¹K, Rb or NH₄) are reported. The compounds crystallize in the monoclinic system. Unit cell parameters were determined from X-ray powder diffraction data. The magnetic susceptibilities of the complex chlorides were measured by the Faraday method in the 4.2–300 K range. The compounds exhibit Curie-Weiss paramagnetism in the 100–300 K range, with the derived effective magnetic moments ranging from 3.57μ_B to 3.71μ_B. Solid state electronic and IR spectra were recorded in the 4000–30 000 and 80–4000 cm⁻¹ ranges, respectively and discussed. Non-static high vacuum thermal dehydrations enabled us to obtain the anhydrous compounds KUCl₄, RbUCl₄ and UCl₃.     

A comparative study on selective properties of Kraft lignin–natural rubber composites containing different plasticizers

Effect of plasticizer type on the kraft lignin–natural rubber composite microstructure and selected properties was determined. The composites were prepared with addition of a commonly used naphthenic oil plasticizer to study the decomposition product of polyurethane (glycerolysate) and its characteristics. Kraft lignin powder was incorporated into the natural rubber matrix in amounts of 10 and 40 parts per 100 parts of natural rubber (phr). The reference samples were prepared without any lignin present. The chemical interaction between the filler particles and natural rubber macromolecules was analyzed by Fourier transform infrared spectroscopy (FTIR) and the adhesion was characterized by scanning electron microscopy (SEM). The results of the adhesion measurements confirmed poor distribution of lignin particles into the natural rubber matrix with increasing filler content. Optimal lignin content in the composites was 10 phr in the case of both plasticizers. Moreover, the results of FTIR verified the formation of non-covalent bonds and the need for modification of the filler to enhance the reinforcing effect in the natural rubber matrix. Dynamic mechanical analysis (DMA) and mechanical measurements proved that the specimen containing 10 phr of lignin with the use of glycerolysate as plasticizer displayed the highest mechanical performance. It was demonstrated that glycerolysate and naphthenic oil as plasticizing agents showed similar effect on the thermal properties of the prepared composites. Also, the measured mechanical properties, such as tensile strength, hardness, resilience, and abrasiveness confirmed these findings.     

Secondary ketonization of primary alcohol over LaMn-based mixed oxides with perovskite-like structure

LaMnO₃-based mixed oxides with perovskite-like structure both bulk and supported on La–Al₂O₃, show high catalytic activity in dehydrogenation of n-butanol to an aldehyde, which then undergoes a secondary reaction to produce a symmetrical ketone. Partial substitution of Cu, V or Sr into LaMnO₃ structure does not destroy the perovskite-like structure and enables to control the acid–base surface properties. It allows linking up these qualitative and quantitative features with activity and selectivity of these materials. The degree of n-butanol conversion depends on the total concentration of basic and acidic sites. Selectivity to butyraldehyde can be related with the share of basic sites. Selectivity to dipropyl ketone is affected both by the acidity and concentration of acidic sites. LaMnO₃/La–Al₂O₃ seems to posses an optimum set of surface characteristics for the examined ketonization of a primary alcohol.