Quantitative characterization of carrier injection across metal–organic interfaces using Bardeen theory

We have investigated the contact between a metal and an organic/polymeric (o/p) material and we have introduced a relation for carrier injection using Bardeen theory. A series of narrow barriers is considered in the semiconductor side to account for the localized nature of the carriers in the o/p material. As an application of the model, we have calculated the hopping rate of carriers in terms of the contact parameters. Also, we have discussed the hopping of carriers deep into the organic dielectric. Finally, we have explored the hopping rate in practical contacts between polyfluorene-based polymers and different electrodes.     

Highly efficient synthesis of benzopyranopyridines via ZrP2O7 nanoparticles catalyzed multicomponent reactions of salicylaldehydes with malononitrile and thiols

ZrP₂O₇ nanoparticles as an efficient catalyst have been used for the preparation of benzopyrano[2,3-b]pyridines from the four-component condensation reaction of salicylalde-hydes, thiols, and 2 equiv. of malononitrile under reflux conditions in ethanol in excellent yields and short reaction times.     

Nano ZrP2O7 Catalyzed Multicomponent Reaction for an Easy Access of 4H-pyrans and 1,4-dihydropyridines

ZrP₂O₇ nanoparticle catalyzed one-pot synthesis of 4H-pyran scaffolds installing a one-pot three-component coupling reaction of an aldehyde, malononitrile, and ethyl acetoacetate. Also the synthesis of 1,4-dihydropyridines was investigated by using aldehydes, ethyl acetoacetate and ammonium acetate as utilizing nano structured ZrP₂O₇ as an efficient catalyst in ethanol. The attractive features of this process are mild reaction conditions, reusability of the catalyst, short reaction times, easy isolation of the products, and excellent yields.     

Matrix based method for synthesis of main intensified and integrated distillation sequences

The objective of many studies in this area has involved access to a column-sequencing algorithm enabling designers and researchers alike to generate a wide range of sequences in a broad search space, and be as mathematically and as automated as possible for programing purposes and with good generality. In the present work an algorithm previously developed by the authors, called the matrix method, has been developed much further. The new version of the algorithm includes thermally coupled, thermodynamically equivalent, intensified, simultaneous heat and mass integrated and divided-wall column sequences which are of gross application and provide vast saving potential both on capital investment, operating costs and energy usage in industrial applications. To demonstrate the much wider searchable space now accessible, a three component separation has been thoroughly examined as a case study, always resulting in an integrated sequence being proposed as the optimum.     

Research on the Effect of Pouring Temperature on Hot-Tear Susceptibility of A206 Alloy by Simulation

Cast alloys with wide solidification ranges are prone to hot tearing. This study deals with prediction of hot tearing location and its intensity by computer simulation. The simulation was performed at different pouring temperatures on A206 aluminum alloy. As superheat increases, the critical fraction solid time increases which means the alloy is more susceptible to hot tearing. These theoretical predictions are in complete accordance with experimental results.     

Oxidative stability of olive oil during the thermal process: Effect of Pistacia khinjuk fruit oil

The oxidative stability of refined olive oil with incorporated Pistacia khinjuk fruit oil (PKFO; 0.5%, 1%, 2%, 5%, and 10%) during thermal processing at 170ºC for 8 h was evaluated. The conjugated diene values, carbonyl values, acid values, oil/oxidative stability indices, and total tocopherol content were measured during thermal processing. Olive oil containing 0.5% PKFO was identified as the most oxidative stable oil followed by oils containing 100 ppm TBHQ and 1, 5, 10, and 2% PKFO. No significant difference between samples of olive oil containing 100 ppm TBHQ and 1% PKFO was observed. Thus, it was concluded that PKFO at levels lower than 1% could provide stronger antioxidation activity in comparison with TBHQ (the strongest syntactic antioxidant used in the food industry). Moreover, reduction in tocopherol compounds during thermal processing was higher in olive oil containing TBHQ as compared to those in pure olive oil.     

Global and Local Mechanical Properties of Autogenously Laser Welded Ti-6Al-4V

Ti-6Al-4V sheets, 3.2-mm in thickness, were butt welded using a continuous wave 4 kW Nd:YAG laser welding system. The effect of two main process parameters, laser power and welding speed, on the joint integrity was characterized in terms of the joint geometry, defects, microstructure, hardness, and tensile properties. In particular, a digital image correlation technique was used to determine the local tensile properties of the welds. It was determined that a wide range of heat inputs can be used to fully penetrate the Ti-6Al-4V butt joints during laser welding. At high laser power levels, however, significant defects such as underfill and porosity, can occur and cause marked degradation in the joint integrity and performance. At low welding speeds, however, significant porosity occurs due to its growth and the potential collapse of instable keyholes. Intermediate to relatively high levels of heat input allow maximization of the joint integrity and performance by limiting the underfill and porosity defects. In considering the effect of the two main defects on the joint integrity, the underfill defect was found to be more damaging to the mechanical performance of the weldment than the porosity. Specifically, it was determined that the maximum tolerable underfill depth for Ti-6Al-4V is approximately 6 pct of the workpiece thickness, which is slightly stricter than the value of 7 pct specified in AWS D17.1 for fusion welding in aerospace applications. Hence, employing optimized laser process parameters allows the underfill depth to be maintained within the tolerable limit (6 pct), which in turn prevents degradation in both the weld strength and ductility. To this end, the ability to maintain weld ductility in Ti-6Al-4V by means of applying a high energy density laser welding process presents a significant advantage over conventional arc welding for the assembly of aerospace components.     

Multi-objective Phasor Measurement Unit Placement in Electric Power Networks: Integer Linear Programming Formulation

A multi-objective optimal phasor measurement unit placement model using integer linear programming is presented in this article. The proposed model simultaneously optimizes two objectives, i.e., minimization of phasor measurement unit numbers and maximization of measurement redundancy. To calculate the redundancy criteria, the single-line outage and the phasor measurement unit loss are considered simultaneously. A linear formulation is presented for both objective functions. Also herein, to address conflicting attributes and identify Pareto optimal solutions of the multi-objective optimal phasor measurement unit placement problem, a new multi-objective mathematical programming method is proposed. Finally, a new index, i.e., minimum distance to utopia point, is implemented to select the most preferred solution among the available Pareto front based options on the goal to achieve judicious decision makers. Two test systems, i.e., a modified 9-bus and an IEEE 118-bus test systems, are used to illustrate the effectiveness of the proposed framework.