Equilibrium,kinetic and thermodynamic study of removal of reactive orange 12 on platinum nanoparticle loaded on activated carbon as novel adsorbent

The proposed research describes the synthesis and characterization of platinum nanoparticles loaded on activated carbon (Pt-NP-AC) and its efficient application as novel adsorbent for efficient removal of reactive orange 12 (RO-12). The influences of effective parameters following the optimization of variables on removal percentages, their value was set as 0.015 g Pt-NP-AC, pH 1, contact time of 13 min. At optimum values of all variables at 25 and 50 mgL⁻¹ of RO-12 enthalpy (ΔH⁰) and entropy (ΔS⁰) changes was found to be 59.89 and 225.076, respectively, which negative value of ΔG⁰ shows a spontaneous nature, and the positive values of ΔH⁰ and ΔS⁰ indicate the endothermic nature and adsorption organized of dye molecule on the adsorbent surface. Experimental data was fitted to different kinetic models including first-order, pseudo-second-order, Elovich and intra-particle diffusion models, and it was seen that the adsorption process follows pseudo-second-order model in consideration to intra-particle diffusion mechanism. At optimum values of all variables, the adsorption process follows the second-order kinetic and Langmuir isotherm model with adsorption capacity 285.143 mg g⁻¹ at room temperature.     

Nano ZrP2O7 Catalyzed Multicomponent Reaction for an Easy Access of 4H-pyrans and 1,4-dihydropyridines

ZrP₂O₇ nanoparticle catalyzed one-pot synthesis of 4H-pyran scaffolds installing a one-pot three-component coupling reaction of an aldehyde, malononitrile, and ethyl acetoacetate. Also the synthesis of 1,4-dihydropyridines was investigated by using aldehydes, ethyl acetoacetate and ammonium acetate as utilizing nano structured ZrP₂O₇ as an efficient catalyst in ethanol. The attractive features of this process are mild reaction conditions, reusability of the catalyst, short reaction times, easy isolation of the products, and excellent yields.     

Adaptive robust control of uncertain systems with state and input delay

In this paper, adaptive robust control of uncertain systems with multiple time delays in states and input is considered. It is assumed that the parameter uncertainties are time varying norm-bounded whose bounds are unknown but their functional properties are known. To overcome the effect of input delay on the closed loop system stability, new Lyapunov Krasovskii functional will be introduced. It is shown that the proposed adaptive robust controller guarantees globally uniformly exponentially convergence of all system solutions to a ball with any certain convergence rate. Moreover, if there is no disturbance in the system, asymptotic stability of the closed loop system will be established. The proposed design condition is formulated in terms of linear matrix inequality (LMI) which can be easily solved by LMI Toolbox in Matlab. Finally, an illustrative example is included to show the effectiveness of results developed in this paper.     

Magnetic behavior of nickel–bismuth ferrite synthesized by a combined sol–gel/thermal method

The bulk NiFe_2?xBi_xO₄ ferrites with various Bi³⁺ concentration (x=0, 0.1, 0.15) were synthesized via sol–gel procedure, starting from nickel, bismuth and iron nitrate powders, followed by the conventional thermal treatment. The structural and magnetic properties of the as-prepared ferrites were studied by means of X-ray diffraction, alternating gradient force magnetometry and Faraday balance. The anisotropy constant was determined by the law of approach to saturation (LAS) model. An increasing Bi³⁺ concentration in NiFe_2?xBi_xO₄ leads to a decrease in the saturation magnetization, Néel temperature and the anisotropy constant of the material.     

Highly efficient synthesis of benzopyranopyridines via ZrP2O7 nanoparticles catalyzed multicomponent reactions of salicylaldehydes with malononitrile and thiols

ZrP₂O₇ nanoparticles as an efficient catalyst have been used for the preparation of benzopyrano[2,3-b]pyridines from the four-component condensation reaction of salicylalde-hydes, thiols, and 2 equiv. of malononitrile under reflux conditions in ethanol in excellent yields and short reaction times.     

Rapid Separating and Enrichment of 4,4′-Dimethylsterols of Vegetable Oils by Solid-Phase Extraction

Phytosterols are separated into three classes: 4-desmethylsterols, 4-monomethylsterols and 4,4′-dimethylsterols. 4,4′-Dimethylsterols are used to detect vegetable oil adulteration and some compounds from this class can have anti-inflammatory and anticancer properties. There are methods such as thin layer chromatography (TLC) and solid phase extraction (SPE) used to separate phytosterol classes from each other. However, in some cases, separation of all three classes is not required. In addition, TLC has some drawbacks such as low recovery and it is time consuming. An SPE method has previously been used, but it was necessary to use high volume of solvents with this method to avoid coelution of phytosterol classes. In this study, an SPE (silica, 1 g) method was developed to separate and enrich only 4,4′-dimethylsterols from unsaponifiables of vegetable oil samples using 25 mL n-hexane and diethyl ether (95:5, v:v). This method was applied to hazelnut and olive oils and results were compared with those of TLC and the previously developed SPE method. Recovery of 4,4′-dimethylsterols was two times higher with the new SPE method compared with the TLC method. The newly developed SPE method generally gave a similar recovery compared with the previously developed SPE method. Moreover, the SPE method developed in this study has the advantage of using a 3.5 times lower volume of solvent than previously developed SPE methods. Because the newly developed SPE method has a single step requiring a low volume of solvents, it is rapid and simple, and can easily be used to detect olive oil adulteration with hazelnut oil and to analyze and quantify effective nutritional compounds in the 4,4′-dimethylsterols class.     

Matrix based method for synthesis of main intensified and integrated distillation sequences

The objective of many studies in this area has involved access to a column-sequencing algorithm enabling designers and researchers alike to generate a wide range of sequences in a broad search space, and be as mathematically and as automated as possible for programing purposes and with good generality. In the present work an algorithm previously developed by the authors, called the matrix method, has been developed much further. The new version of the algorithm includes thermally coupled, thermodynamically equivalent, intensified, simultaneous heat and mass integrated and divided-wall column sequences which are of gross application and provide vast saving potential both on capital investment, operating costs and energy usage in industrial applications. To demonstrate the much wider searchable space now accessible, a three component separation has been thoroughly examined as a case study, always resulting in an integrated sequence being proposed as the optimum.     

Removal of Diazinon from aqueous solution by electrocoagulation process using aluminum electrodes

Electrocoagulation (EC) is an electrochemical method to treat polluted wastewaters and aqueous solutions. In this paper, the removal of Diazinon was studied by EC on aluminum electrode. The effect of several parameters such as initial concentration of Diazinon, current density, solution conductivity, effect of pH, and electrolysis time were investigated on EC performance. The obtained results showed that the removal efficiency of EC depends on the current density, initial concentration of Diazinon and electrolysis time. The optimum pH is 3 and also the solution conductivity has no significant effect on removal efficiency.     

A wide frequency range delay line for fast-locking and low power delay-locked-loops

A voltage controlled delay cell with wide frequency range is presented in this paper. The delay-line which is resulted by connecting five series of delay cells generating a wide range of delay from 1.9 to 13.24 ns. It can be used in an analog delay locked loop. The linear characteristic of the circuit with respect to the conventional delay line structures is improved, and a better performance of noise is obtained using differential structure. This circuit is designed by ADS software and TSMC CMOS 0.18 μm technology, with supply voltage 1.8 V. By changing control voltage from 0.335 to 1.8 V in delay line, a wide range of frequency from 75.52 to 917.43 MHz will be covered. Simulation results show that the proposed delay line has power consumption of maximum 3.77 mW at frequency of 75.52 MHz. It also shows that increasing of frequency will reduce power dissipation which is the one of the main characteristics of this novel circuit. Moreover, the delay locked loop which uses these delay cells has a very high lock speed so that the maximum lock time in just five clock cycles.     

Measurement of Consumed Energy Due to the Two-Phase Pressure Drop in a Pulsed Semi-Industrial Column: Effect of Geometry

This article deals with the evaluation of pressure drop and consumption of energy for a steady-state solvent extraction in a horizontal pulsed sieve-plate column, which are important for the design and optimization of the periodic-flow processes for industrial applications. In this study, the pressure drop and the position of loading points are investigated. Moreover, a mathematical evaluation on the energy consumption in the case of a pulsed flow is conducted, and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and plate-free area is investigated as well. The results of this study are helpful for optimization of column geometry targeted to higher performance and lower energy consumption.