Solution of diffusion equation in deformable spheroids

The time-dependent diffusion of neutrons in a spheroid as a function of the focal distance has been studied. The solution is based on an orthogonal basis and an extrapolation distanced related boundary condition for the spheroidal geometry. It has been shown that spheres and disks are two limiting cases for the spheroids, for which there is a smooth transition for the systems properties between these two limits. Furthermore, it is demonstrated that a slight deformation from a sphere does not affect the fundamental mode properties, to the first order. The calculations for both multiplying and non-multiplying media have been undertaken, showing good agreement with direct Monte Carlo simulations.     

Optical and electrical characterization of CdS thin films

Thin CdS films have been grown by chemical bath (CdCl₂, thiourea, ammonia) deposition (CBD) on SnO₂ (TO)-coated glass substrate for use as window materials in CdS/CdTe solar cells. High-resolution transmission electron microscopy revealed grains with an average size of 10 nm. The structure was predominantly hexagonal with a high density of stacking faults. The film crystallinity improved with annealing in air. Annealing in a CdCl₂ flux increased the grain size considerably and reduced the density of stacking faults. The optical transmission of the as-deposited films indicated a band gap energy of 2.41 eV. Annealing in air reduced the band gap by 0.1 eV. Annealing in CdCl₂ led to a sharper optical absorption edge that remained at 2.41 eV. Similar band gap values were obtained by photocurrent spectroscopy and electroabsorption spectroscopy (EEA) using an electrolyte contact. EEA spectra were broad for the as-deposited and air-annealed samples, but narrower for the CdCl₂-annealed films, reflecting the reduction in stacking fault density. Donor densities of ca. 10¹⁷ cm ^–3 were derived from the film/electrolyte junction capacitance.     

A density-based fuzzy clustering technique for non-destructive detection of defects in materials

In non-destructive testing and evaluation of materials, defects contain visible aggregations of similar levels of brightness with large scale of correlation between them. In most cases, these brightnesses have no notable contrast relative to non-defect counterparts. However, the density and the size of the defect are visually the most notable features. In this paper, we have utilized human conception for classifying defects by the fusion of fuzzy clustering method and fuzzy logic rules based on the density and the size of the defect. The probability of detection and the probability of error are compared with the Bayes classifier. The proposed approach shows that there is less dependency between the variation of density and size of a defect and variations of noise density and distribution. Experimental images from eddy current, ultrasonic and radiography techniques are investigated. It is shown that the new approach reduces the noise and drift, leading to a better detection of defects.     

The effect of initiator‐to‐monomer ratio on the properties of the polybutadiene‐ol synthesized by free radical solution polymerization of 1,3‐butadiene

Polybutadiene‐ol was synthesized by solution radical polymerization of 1,3‐butadiene in the presence of hydrogen peroxide as initiator and 2‐propanol as solvent. The ratio of initiator to monomer molar concentration, [I₀]/[M₀], was varied while temperature, reaction time and the type and amount of solvent were kept constant. The effects on the M_n; M_w; M_v; PDI, OH‐number and functionality of the synthesized polyols were studied. By taking several samples during a polymerization batch and analyzing them, the time of reaction was chosen as 100 min, after which the PDI changed dramatically. M_n decreased exponentially with increasing [I₀]/[M₀] according to the relationship M_n = 565.55 ([I₀]/[M₀])^?0.7553. The decrease observed in M_w gradually levelled off with increasing [I₀]/[M₀] and molecular weight distribution broadened at larger values of [I₀]/[M₀]. The OH‐number increases with [I₀]/[M₀]. In addition to the number‐average molecular weight, functionality is dependent on the number of hydroxyl‐terminated chain radicals in the reaction medium. Copyright © 2003 Society of Chemical Industry     

A modified segment-based nonrandom two-liquid model for the calculation of vapor-liquid equilibrium of aqueous polymer-salt solutions

A new model for representation of the excess Gibbs energy of polymer-electrolyte solutions is proposed. The excess Gibbs energy of a polymer-electrolyte solution is expressed as a sum of contributions of a combinatorial, a long-range and a short-range excess Gibbs energy term. The Flory-Huggins expression and the Pitzer's extension of Debye-Hückel function are used, respectively, as a combinatorial and a long-range contribution to the excess Gibbs energy. A new expression based on the local composition concept, which is the modified nonrandom two-liquid (NRTL) model, is developed to account for the short-range contribution to the excess Gibbs energy. The model provides a versatile and flexible thermodynamic framework for both correlating and predicting the phase equilibrium of electrolyte solutions, polymer solutions and complex systems containing both electrolytes and polymers. The utility of the model is demonstrated with successful representation of vapor-liquid equilibrium of several PEG or PPG-salt-H₂O systems at different polymer molar masses. Results are compared with those obtained from the NRTL model.     

An optimal proportional-plus-integral/tracking control law for aircraft applications

An optimal proportional-plus-integral/tracking control law is formulated. The control law has a command augmentation system configuration suitable for implementation on a digital computer on-board an aircraft. The proposed configuration offers the flexibility for choosing a feedforward matrix incorporating a set of additional control elements and for shaping the transient response without affecting the steady-state tracking property. Assuming the system is open-loop stable, then in the presence of a "jam" the disengaged system will maintain the steady-state tracking property which is desirable for aircraft continuing their mission.     

An analogue approach to surface definition

This note describes a method for producing cubic curves made up from Bézier functions on an oscilloscope screen using simple analogue techniques. Ruled surface patches are illustrated in a simple extension of the method. It also indicates how generalized Bézier patches could be produced.