Morphological and chemical studies of pathological human and mice brain at the subcellular level: correlation between light, electron, and nanosims microscopies

Neurodegenerative diseases induce morphological and chemical alterations in well-characterized regions of the brain. Understanding their pathological processes requires the use of methods that assess both morphological and chemical alterations in the tissues. In the past, microprobe approaches such as scanning electron microscopy combined with an X-ray spectrometer, Proton induced X-ray emission, secondary ion mass spectrometry (SIMS), and laser microprobe mass analysis have been used for the study of pathological human brain with limited success. At the present, new SIMS instruments have been developed, such as the NanoSIMS-50 ion microprobe, that allow the simultaneous identification of five elements with high sensitivity, at subcellular spatial resolution (about 50-100 nm with the Cs(+) source and about 150-200 nm with O(-) source). Working in scanning mode, 2D distribution of five elements (elemental maps) can be obtained, thus providing their exact colocalization. The analysis can be performed on semithin or ultrathin embedded sections. The possibility of using transmission electron microscopy and SIMS on the same ultrathin sections allows the correlation between structural and analytical observations at subcellular and ultrastructural level to be established. Our observations on pathological brain areas allow us to establish that the NanoSIMS-50 ion microprobe is a highly useful instrument for the imaging of the morphological and chemical alterations that take place in these brain areas. In the human brain our results put forward the subcellular distribution of iron-ferritin-hemosiderin in the hippocampus of Alzheimer disease patients. In the thalamus of transgenic mice, our results have shown the presence of Ca-Fe mineralized amyloid deposits.     

Academic trajectories of newcomer immigrant youth.

Immigration to the United States presents both challenges and opportunities that affect students' academic achievement. Using a 5-year longitudinal, mixed-methods approach, we identified varying academic trajectories of newcomer immigrant students from Central America, China, the Dominican Republic, Haiti, and Mexico. Latent class growth curve analysis revealed that although some newcomer students performed at high or improving levels over time, others showed diminishing performance. Multinomial logistic regressions identified significant group differences in academic trajectories, particularly between the high-achieving youth and the other groups. In keeping with ecological–developmental and stage–environment fit theories, School Characteristics (school segregation rate, school poverty rate, and student perceptions of school violence), Family Characteristics (maternal education, parental employment, and household structure), and Individual Characteristics (academic English proficiency, academic engagement, psychological symptoms, gender, and 2 age-related risk factors, number of school transitions and being overaged for grade placement) were associated with different trajectories of academic performance. A series of case studies triangulate many of the quantitative findings as well as illuminate patterns that were not detected in the quantitative data. Thus, the mixed-methods approach sheds light on the cumulative developmental challenges that immigrant students face as they adjust to their new educational settings. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A module‐integrated isolated solar micro‐inverter without electrolytic capacitors

This paper presents a module‐integrated isolated solar micro‐inverter. The studied grid‐tied micro‐inverters can individually extract the maximum solar power from each photovoltaic (PV) panel and transfer to the AC utility system. A harmonic suppression technique is used to reduce the DC‐bus capacitance. Electrolytic capacitors are not needed in the studied solar micro‐inverter. High conversion efficiency, high maximum power point tracking accuracy and long lifespan can be achieved. The operation principles and design considerations of the studied PV inverter are analyzed and discussed. A laboratory prototype is implemented and tested to verify its feasibility. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimal adaptive server allocation in a network

This paper considers an adaptive version of the problem of Klimov. There are N nodes with a Bernoulli routing and exogenous Poisson arrival processes. The service times are independent and are identically distributed in each node, with an unknown distribution. There is a single server to be allocated in a nonpre-emptive way to the customers. The problem is to minimize the long term average waiting cost per unit of time, for given cost rates in the nodes.The result is that the certainty equivalence controller, that assigns the server optimally assuming that the sample means of the service times are the correct means, is optimal.The analysis is based on results about last exit times of random walks.     

Comparison of pulse subtraction Doppler and pulse inversion Doppler

In this paper, a new Doppler technique based on pulse subtraction imaging (PSD) is described and compared with pulse inversion Doppler (PID). Combining a nonlinear contrast agent imaging technique with a Doppler process provides a tool for detecting motion of both contrast agents and tissues. This has potential in targeted imaging in which attached microbubbles need to be separated from moving ones and surrounding tissues. The results from both simulation and experiment show that PSD is able to differentiate bubble motion from tissue motion. For Doppler processing conducted at the fundamental frequency, the contrast-to-tissue ratio (CTR) in PSD was 3.3 (±0.4) times higher on average than PID at a mechanical index (MI) of 0.1. At the harmonic frequency, PID was shown to have a 3.1 (±0.4) times higher CTR than PSD. Overall, taken in their optimum processing conditions, PID has a CTR up to 1.9 (±0.4) times higher than PSD. The CTRs for both techniques have also been shown to increase with increasing MI. However, for the same axial Doppler resolution. PSD also allows less energy to be transmitted into the medium, which makes it less disruptive. The relative performances of PSD and PID in terms of the bandwidth of the imaging system are also discussed.     

Length of Dialysis Session Is More Important Than Large Kt/V in Hemodialysis

Long, slow hemodialysis (3 × 8 hours/week) has been used without significant modification in Tassin, France, for 30 years with excellent morbidity and mortality rates. A long dialysis session easily provides high Kt/V_urea and allows for good control of nutrition and correction of anemia with a limited need for erythropoietin (EPO). Control of serum phosphate and potassium is usually achieved with low-dose medication. The good survival achieved by long hemodialysis sessions is essentially due to lower cardiovascular morbidity and mortality than in short dialysis sessions. This, in turn, is mainly explained by good blood pressure (BP) control without the need for antihypertensive medication. Normotension in this setting is due to the gentle but powerful ultrafiltration provided by the long sessions, associated with a low salt diet and moderate interdialytic weight gains. These allow for adequate control of extracellular volume (dry weight) in most patients without important intradialytic morbidity. Therefore, increasing the length of the dialysis session seems to be the best way of achieving satisfactory long-term clinical results.     

Les phases SrLa2Al2O7 et SrGd2Al2O7

SrLa₂Al₂O₇ and SrGd₂Al₂O₇ belong to the structural type Sr₃Ti₂O₇. In SrGd₂Al₂O₇ strontium and gadolinium occupy respectively the 12 and 9 coordinated sites, whereas in SrLa₂Al₂O₇ the homologous cations are statistically distributed. The fluorescence spectra of both phases activated by Eu³⁺ ions show that the only possible position of Eu³⁺ is the 9 coordinated site.     

Real‐time hybrid control of electrohydraulic active suspension

Electrohydraulic actuators are an attractive choice for active suspension, because these systems provide a high power‐to‐weight ratio. However, their dynamics are highly nonlinear. In addition, the use of one simple controller for both position and force is complicated, because there is a compromise between them in the case of active suspension. Most existing controllers do not efficiently fulfill the requirements, because only one state variable is considered. In this paper, we address these problems by developing a new hybrid controller for both position and force and implementing it in a real‐time test bench. Our goal is to control the vertical position of the passenger seat while tracking the force transmitted to passengers and keeping it within tolerable and comfortable limits. Therefore, the proposed controller is a combination of two controllers. Its flexible structure redirects the control signal to control the proper controlled state variable. The real‐time results of the newly designed hybrid controller are compared with those obtained using a classical proportional integral derivative controller, because this is the most widely used controller in the industry. As expected, the proposed controller demonstrates better performance in real‐time operation. Copyright © 2017 John Wiley & Sons, Ltd.     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.