Tailoring Electron‐Transfer Barriers for Zinc Oxide/C60 Fullerene Interfaces

The interfacial electronic structure between oxide thin films and organic semiconductors remains a key parameter for optimum functionality and performance of next‐generation organic/hybrid electronics. By tailoring defect concentrations in transparent conductive ZnO films, we demonstrate the importance of controlling the electron transfer barrier at the interface with organic acceptor molecules such as C₆₀. A combination of electron spectroscopy, density functional theory computations, and device characterization is used to determine band alignment and electron injection barriers. Extensive experimental and first principles calculations reveal the controllable formation of hybridized interface states and charge transfer between shallow donor defects in the oxide layer and the molecular adsorbate. Importantly, it is shown that removal of shallow donor intragap states causes a larger barrier for electron injection. Thus, hybrid interface states constitute an important gateway for nearly barrier‐free charge carrier injection. These findings open new avenues to understand and tailor interfaces between organic semiconductors and transparent oxides, of critical importance for novel optoelectronic devices and applications in energy‐conversion and sensor technologies.     

Water retention and gas relative permeability of two industrial concretes

This experimental study aims at identifying the water retention properties of two industrial concretes to be used for long term underground nuclear waste storage structures. Together with water retention, gas transfer properties are identified at varying water saturation level, i.e. relative gas permeability is assessed directly as a function of water saturation level S_w. The influence of the initial de-sorption path and of the subsequent re-saturation are analysed both in terms of water retention and gas transfer properties. Also, the influence of concrete microstructure upon water retention and relative gas permeability is assessed, using porosity measurements, analysis of the BET theory from water retention properties, and MIP. Finally, a single relative gas permeability curve is proposed for each concrete, based on Van Genuchten–Mualem's statistical model, to be used for continuous modelling approaches of concrete structures, both during drying and imbibition.     

Cereal‐based fermented foods in developing countries: ancient foods for modern research

Cereal‐based fermented foods are major contributors to energy intake in developing countries (DC). Their microbiota is dominated by lactic acid bacteria and has been extensively investigated. Diversity studies have been facilitated by molecular methods enabling genotyping of isolates; the rapid development of ‘omics’ approaches should facilitate more comprehensive studies to describe the relation between microbial diversity, cell physiology and product characteristics. Also, the link between the food microbiota and health benefits, in particular in nutrition, should be investigated. There is a need to encourage researches in the field of DC cereal‐based foods in direction of more mechanistic approaches.     

A First Report of Photoemission in Experiments Related to Flash Sintering

A highly nonlinear increase in electrical conductivity and concomitant photoemission occurs not only during “flash sintering” but also in presintered, dense specimens. We report results from experiments with dense specimens that show a strong correspondence between the intensity of photoemission and electrical conductivity of specimens under a variety of conditions of the electrical parameters. It is proposed that both properties are related to the concentration of electron–hole pairs generated in such experiments.     

The Effect of Implanted Al and/or Y on the Scale Formation on Low-Al Fe20Cr2Al Alloy

The very early stages of the oxidation of an Fe20Cr2Al alloy, unmodified and ion-implanted by aluminium, yttrium and a combination of both elements, Al and Y, were studied at 1100 °C in oxygen using two-stage-oxidation exposures with ¹⁸O₂ as a tracer and subsequent characterisation of the scales using SIMS analyses of distribution of oxygen isotopes and oxide-related negative ion clusters, SEM observations of the surface morphology and photoluminescence spectroscopy analysis of the phase composition. The scales formed in all cases, except for the Al-implanted alloy, exhibited layered structures, with the outer part comprising Fe- and Cr-rich oxide, and the inner part being Al₂O₃, which grew due to a mixed outward–inward mechanism . The alumina sub-layers contained the transient oxides and α-Al₂O₃. Implanted Al significantly affected the mechanism of the scale growth, providing that the scale consisted essentially of α-Al₂O₃, and grew via a mixed inward-outward mechanism typical for scales on alumina formers.     

Ester-functionalized poly(3-alkylthiophene) copolymers: Synthesis,physicochemical characterization and performance in bulk heterojunction organic solar cells

The introduction of functional moieties in the donor polymer (side chains) offers a potential pathway toward selective modification of the nanomorphology of conjugated polymer:fullerene active layer blends applied in bulk heterojunction organic photovoltaics, pursuing morphology control and solar cell stability. For this purpose, two types of poly(3-alkylthiophene) random copolymers, incorporating different amounts (10/30/50%) of ester-functionalized side chains, were efficiently synthesized using the Rieke method. The solar cell performance of the functionalized copolymers was evaluated and compared to the pristine P3HT:PCBM system. It was observed that the physicochemical and opto-electronic characteristics of the polythiophene donor material can be modified to a certain extent via copolymerization without (too much) jeopardizing the OPV efficiency, as far as the functionalized side chains are introduced in a moderate ratio (<30%) and that preference is given to side chains with a small molar volume. A range of complementary techniques – UV–Vis spectroscopy, (modulated temperature) differential scanning calorimetry, transmission electron microscopy and X-ray diffraction analysis – indicated that variations in polymer crystallinity, while maintaining a high level of regioregularity, are probably the main factor responsible for the observed differences.