The fabrication of exfoliated graphite sheet-based air cathodes and gel electrolyte for metal-air batteries

In this paper, we demonstrate that activated carbon (AC) and manganese dioxide (MnO₂) coated exfoliated graphite sheets are a promising cathode for metal-air batteries. A simple and effective method is developed to exfoliate the graphite sheets and to load a catalyst onto their surfaces. Several low-cost, environmentally friendly air cathodes are fabricated, and their performances are tested by constructing Al-air b`atteries whose electrolyte 6 M NaOH, including ZnO inhibitor, is gelled by adding a cost-effective water retainer. The experimental results show that this new Al-air battery has a good discharge performance. In particular one of the new cathodes containing 50 wt% AC and 50 wt% MnO₂ produces a capacity of 311 mAh/g at a constant current discharge of 1.56 mA. Finally, future research directions are discussed for the further usage of the fabricated cathodes.     

Novel ZA27/B4C/Graphite Hybrid Nanocomposite-Bearing Materials with Enhanced Wear and Corrosion Resistance

Metallurgical and Materials Transactions A - In this study, nanosized B4C and graphite-reinforced ZA27 matrix hybrid nanocomposites were produced with mechanical milling followed by hot pressing....     

Design,synthesis, and characterization of hybrid micro-nano surface coatings for enhanced heat transfer applications

Metal particles coating is extensively used for surface coating a wide range of application including thermal management of electronics, concentrating photovoltaics, sensors and nuclear power plants. Both micro and nano-scale surfaces have been proven to show an enhanced two-phase heat transfer performance by varying surface properties like area, wettability, and roughness. To combine the unique features of both micro and nano-scale surface coatings, this study presents the design, synthesis, and characterization of new hybrid micro-nano scale surface coating by a new two steps approach. Five different types of surfaces; namely, plain nanocoated (PNC), uniform micro-porous (UMP), uniform hybrid micro-nano porous (UHMNP), 2-D modulated microporous (MMP) and modulated hybrid micro-nano (MHMNP) surfaces were fabricated. A new two steps approach of hot-pressing followed by nucleate boiling is used for the fabrication of these surfaces. Successful coating of hybrid micro-nano scale coating was achieved. Considering the critical surface properties of micro and nanoscale coatings, new hybrid micro-nano surfaces have been characterized for SEM, wettability, roughness test. The comparative analysis of these new hybrid coating is also performed with micro coated and uncoated surfaces. With the coating of nanoparticles, the average roughness of PNC surface increased by 4.67 times and that of hybrid micro-nano particle surface by 2.3 times. The deposition of nanoparticles resulted in an increase in contact angle for PNC surface, while the contact angle of hybrid micro-nano surfaces decreases from 126.4° to 82.1°.     

Data‐driven model for river flood forecasting based on a Bayesian network approach

Uncertainty analysis of hydrological models often requires a large number of model runs, which can be time consuming and computationally intensive. In order to reduce the number of runs required for uncertainty prediction, Bayesian networks (BNs) are used to graphically represent conditional probability dependence between the set of variables characterizing a flood event. Bayesian networks (BNs) are relevant due to their capacity to handle uncertainty, combine statistical data and expertise and introduce evidences in real‐time flood forecasting. In the present study, a runoff–runoff model is considered. The discharge at a gauging station located is estimated at the outlet of a basin catchment based on discharge measurements at the gauging stations upstream. The BN model shows good performances in estimating the discharges at the basin outlet. Another application of the BN model is to be used as a reverse method. Knowing discharges values at the outlet of the basin, we can propagate back these values through the model to estimate discharges at upstream stations. This turns out to be a practical method to fill the missing data in streamflow records which are critical to the sustainable management of water and the development of hydrological models.     

IDL-PMCFG,a Grammar Formalism for Describing Free Word Order Languages

Journal of Logic, Language and Information - We introduce Interleave-Disjunction-Lock parallel multiple context-free grammars (IDL-PMCFG), a novel grammar formalism designed to describe the syntax...     

Phosphorylated cellulose/electrospun chitosan nanofibers media for removal of heavy metals from aqueous solutions

Contamination of water resources by toxic heavy metals has significant impacts on environmental and human health. Their removal from aqueous media is essential to ensure water sustainability and to provide safe freshwater availability to population. Electrospun chitosan (CS) nonwoven mats are efficient at removing heavy metals from aqueous media. However, they suffer from low permeability and low-mechanical strength. They are also unable to remove contaminants in a nonselective way. A bilayer sorbent media made of a porous phosphorylated cellulose substrate covered by electrospun CS nanofibers was developed to overcome those weaknesses. The hydrophilic composite shows good water permeability and mechanical strength with appropriate thermal and chemical characteristics. Adsorption tests with Cd(II) indicate that pseudo-second order and Langmuir models best fitted experimental data, with a maximum adsorption capacity of 591 mg/g at 25°C. Adsorption with multielement samples containing Cr(VI), Cu(II), Cd(II), and Pb(II) also reveal their capability to remove them in a selective way. This mechanically resistant, hydrophilic, and permeable adsorbent media was able to capture both cationic and anionic metallic contaminants.     

Solid-Phase Synthesis of Substrate-Based Dipeptides and Heterocyclic Pseudo-dipeptides as Potential NO Synthase Inhibitors

More than 160 arginine analogues modified on the C-terminus via either an amide bond or a heterocyclic moiety (1,2,4-oxadiazole, 1,3,4-oxadiazole and 1,2,4-triazole) were prepared as potential inhibitors of NO synthases (NOS). A methodology involving formation of a thiocitrulline intermediate linked through its side-chain on a solid support followed by modification of its carboxylate group was developed. Finally, the side-chain thiourea group was either let unchanged, S-alkylated (Me, Et) or guanidinylated (Me, Et) to yield respectively after TFA treatment the corresponding thiocitrulline, S-Me/Et-isothiocitrulline and N-Me/Et-arginine substrate analogues. They all were tested against three recombinant NOS isoforms. Several compounds containing a S-Et- or a S-Me-Itc moiety and mainly belonging to both the dipeptide-like and 1,2,4-oxadiazole series were shown to inhibit nNOS and iNOS with IC₅₀ in the 1–50 μM range. Spectral studies confirmed that these new compounds interacted at the heme active site. The more active compounds were found to inhibit intra-cellular iNOS expressed in RAW264.7 and INS-1 cells with similar efficiency than the reference compounds L-NIL and SEIT.     

Xylene Isomerization in the Liquid Phase Using Large‐Pore Zeolites

Three large‐pore zeolites, Beta with Si/Al ratios of 25 and 35 and Mordenite with an Si/Al ratio of 30, were studied in the conversion of o‐xylene at 493 K. Maximum conversion was achieved by the catalyst with the highest Si/Al ratio due to faster diffusion of the isomer inside the zeolite channels because of the lower acidity of the solid even with larger crystal size. A kinetic study was then carried out over this catalyst between 473 and 513 K in a batch reactor in the liquid phase. The activation energies obtained do not indicate the presence of diffusional constraints towards any isomer. Finally, the kinetic model obtained was simulated in a fixed‐bed reactor and compared to ZSM‐5 in the temperature range from 493 to 533 K. An increment in p‐xylene production of 20 % on average was obtained.