Measurement and Simulation of the Flow Field around a Triangular Lattice Meteorological Mast

The international standard IEC 61400-12-1 Wind turbines--Part 12-1： Power performance measurements of electricity producing wind turbines＂ aims to provide a uniform methodology that will ensure consistency, accuracy and reproducibility in the measurement and analysis of power performance by wind turbines. Annex G of this standard provides a methodology for the appropriate arrangement of instruments on the meteorological mast to ensure accurate measurement. For cup anemometers it provides recommendations about their location relative to the mast so that the effect of mast and boom interference on their output may be minimised. These recommendations are given for both tubular masts and lattice masts. This paper compares the flow distortion predicted by the IEC standard and the results of a 3D CFD （computational fluid dynamics） simulation of a triangular lattice mast. Based on the results of wind tunnel and CFD simulation it was found that the flow distortion surrounding the lattice mast was overpredicted by the method suggested in appendix G oflEC61400-12-1. Using the CFD data it was possible to determine, for a range of flow directions and mast heights, the distance from the mast that anemometers would need to be in order to be outside the flow distortion field.     

Identification of a triacylglycerol lipase gene family in Candida deformans: molecular cloning and functional expression

The yeast Candida deformans CBS 2071 produces an extracellular lipase which was shown to catalyse the production of various esters by the esterification of free fatty acids, even in the presence of a large molar excess of water. To clone the gene encoding this extracellular lipase, Saccharomyces cerevisiae was transformed with C. deformans genomic libraries and screened for lipolytic activity on a medium containing rapeseed oil emulsion and rhodamine B. Three members of a lipase gene family (CdLIP1, CdLIP2 and CdLIP3) were cloned and characterized. Each deduced lipase sequence has a Gly-His-Ser-Leu-Gly-(Gly/Ala)-Ala conserved motif, eight cysteine residues and encodes an N-terminal signal sequence. MALDI-TOF mass spectrometry analysis of a proteolytic digest of the lipase produced was used to obtain experimental evidence that the CdLIP1 gene encoded the extracellular lipase. Recombinant expression studies confirmed that the cloned genes encoded functional lipases. The three lipases are very similar to lipases from the related species Yarrowia lipolytica. Significant homologies were also found with several yeast and fungal lipases. As C. deformans CBS 2071 was previously considered to be synonymous with Y. lipolytica, the strains were compared for the extent of nucleotide divergence in the variable regions (D1/D2) at the 5'-end of the large-subunit (26S) ribosomal DNA (rDNA) gene. This rDNA region has diverged sufficiently to suggest that C. deformans is a separate species. The nucleotide sequences of the CdLIP1, CdLIP2 and CdLIP3 genes will appear in the EMBL nucleotide sequence database under Accession Nos AJ428393, AJ428394 and AJ428395, respectively.     

Proteolytic degradation of ewe milk proteins during fermentation of yoghurts and storage

Yoghurts are mostly produced from cow milk and to a very limited extent from ewe milk. The evolution of caseins and whey proteins in ovine milk submitted to different thermal treatments (63 degrees C/30 min; 73 degrees C/15 min; 85 degrees C/10 min or 96 degrees C/5 min) was followed during fermentation of yoghurts and during their storage up to 14 days, using two different sets of starters. One set of starter LAB was a "ropy" culture (YC-191), which is a well-defined mixed strain culture containing Streptococcus thermophilus ST-143 and Lactobacillus delbrueckii subsp. bulgaricus (LB-18 and LB-CH2). The other set of starter bacteria (YC-460) was a standard yoghurt culture("non-ropy") containing mixed strain culture of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus. Contents of free amino groups in produced yoghurts increased gradually during the fermentation, up to a maximal value obtained after 4 h fermentation, then they did not change significantly during storage of yoghurt produced with YC-191 starter. In contrary, a large drop in the amount of free amino groups was observed in the first 24 h of storage in the case of yoghurt made with YC-460 indicating that microorganisms continue still to grow in low temperatures. During fermentation and storage of both yoghurt types, alpha-lactalbumin was hydrolyzed to a slightly bigger extent than beta-lactoglobulin. During fermentation, beta-casein was slightly more degraded than alpha(s)-caseins; however, the opposite was observed during storage up to 14 days. Generally, a more intense heat pretreatment led to a higher degradation of whey proteins and caseins during fermentation and storage. Differences in proteolytic activity between the two starters used (whey proteins more degraded by YC-191; caseins more degraded by YC-460) may lead to improvement in production and formulation of yoghurts differing in their physicochemical and rheological properties.     

Self‐Defensive Biomaterial Coating Against Bacteria and Yeasts: Polysaccharide Multilayer Film with Embedded Antimicrobial Peptide

Prevention of pathogen colonization of medical implants is a major medical and financial issue since infection by microorganisms constitutes one of the most serious complications after surgery or critical care. Immobilization of antimicrobial molecules on biomaterials surfaces is an efficient approach to prevent biofilm formation. Herein, the first self‐defensive coating against both bacteria and yeasts is reported, where the release of the antimicrobial peptide is triggered by enzymatic degradation of the film due to the pathogens themselves. Biocompatible and biodegradable polysaccharide multilayer films based on functionalized hyaluronic acid by cateslytin (CTL), an endogenous host‐defensive antimicrobial peptide, and chitosan (HA‐CTL‐C/CHI) are deposited on a planar surface with the aim of designing both antibacterial and antifungal coating. After 24 h of incubation, HA‐CTL‐C/CHI films fully inhibit the development of Gram‐positive Staphylococcus aureus bacteria and Candida albicans yeasts, which are common and virulent pathogens agents encountered in care‐associated diseases. Hyaluronidase, secreted by the pathogens, leads to the film degradation and the antimicrobial action of the peptide. Furthermore, the limited fibroblasts adhesion, without cytotoxicity, on HA‐CTL‐C/CHI films highlights a medically relevant application to prevent infections on catheters or tracheal tubes where fibrous tissue encapsulation is undesirable.     

"Cognitive-neuropsychological function in chronic physical aggression and hyperactivity": Correction to Séguin et al. (2004).

Reports an error in "Cognitive-Neuropsychological Function in Chronic Physical Aggression and Hyperactivity" by Jean R. Séguin, Daniel Nagin, Jean-Marc Assaad and Richard E. Tremblay (Journal of Abnormal Psychology, 2004[Nov], Vol 113[4], 603-613). The use of a weighted procedure within SAS PROC GLM inflated F statistics and underestimated standard errors that affected only conclusions from secondary analyses that were drawn about the specificity of working memory effects to physical aggression and hyperactivity. The corrected conclusions are presented in the erratum. The last two sentences of the abstract also needed to be corrected in order to reflect the new conclusions. The corrected sentences appear in the erratum as well. (The following abstract of the original article appeared in record 2004-20178-011.) Histories of violence and of hyperactivity are both characterized by poor cognitive-neuropsychological function. However, researchers do not know whether these histories combine in additive or interactive ways. The authors tested 303 male young adults from a community sample whose trajectories of teacher-rated physical aggression and motoric hyperactivity from kindergarten to age 15 were well defined. No significant interaction was found. In a 1st model, both histories of problem behavior were independently associated with cognitive-neuropsychological function in most domains. In a 2nd model controlling for IQ, general memory, and test motivation, the 3 working-memory tests (relevant to executive function) remained associated with physical aggression, and 1 remained associated with hyperactivity. These results support an additive model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

HIx system thermodynamic model for hydrogen production by the Sulfur–Iodine cycle

The HI_x ternary system (H₂O–HI–I₂) is the latent source of hydrogen for the Sulfur–Iodine thermo-chemical cycle. After analysis of the literature data and models, a homogeneous approach with the Peng–Robinson equation of state used for both the vapor and liquid phase fugacity calculations is proposed for the first time to describe the phase equilibrium of this system. The MHV2 mixing rule is used, with UNIQUAC activity coefficient model combined with of hydrogen iodide solvation by water. This approach is theoretically consistent for HI_x separation processes operating above HI critical temperature. Model estimation is done on selected literature vapor–liquid, liquid–liquid, vapor–liquid–liquid and solid–liquid equilibrium data for the ternary system and the three binaries subsystems. Validation is done on the remaining literature data. Results agree well with the published data, but more experimental effort is needed to improve modeling of the HI_x system.     

Bunsen section thermodynamic model for hydrogen production by the sulfur–iodine cycle

A model for the Bunsen section of the Sulfur–Iodine thermo-chemical cycle is proposed, where sulfur dioxide reacts with excess water and iodine to produce two demixing liquid aqueous phases (H₂SO₄ rich and HI rich) in equilibrium. Considering the mild temperature and pressure conditions, the UNIQUAC activity coefficient model combined with Engels' solvation model is used. The complete model is discussed, with HI solvation by water and by iodine as well as H₂SO₄ solvation by water, leading to a very high complexity with almost hundred parameters to be estimated from experimental data. Taking into account the water excess, a successful reduced model with only 15 parameters is proposed after defining new apparent species. Acids total dissociation and total H⁺ solvation by water are the main assumptions. Results show a good agreement with published experimental data between 25 °C and 120 °C.     

Thermal grafting of organic monolayers on amorphous carbon and silicon (111) surfaces: A comparative study

Thermally-assisted (160 °C) liquid phase grafting of linear alkene molecules has been performed simultaneously on amorphous carbon (a-C) and hydrogen passivated crystalline silicon Si(111):H surfaces. Atomically flat a-C films with a high sp³ average surface hybridization, sp³ / (sp² + sp³) = 0.62, were grown using pulsed laser deposition (PLD). Quantitative analysis of X-ray photoelectron spectroscopy, X-ray reflectometry and spectroscopic ellipsometry data show the immobilization of a densely packed (> 3 × 10¹⁴ cm^? 2) single layer of organic molecules. In contrast with crystalline Si(111):H and other forms of carbon films, no surface preparation is required for the thermal grafting of alkene molecules on PLD amorphous carbon. The molecular grafted a-C surface is stable against ambient oxidation, in contrast with the grafted crystalline silicon surface.