Microrheology: new methods to approach the functional properties of food

Three configurations have been developed to improve the understanding of structural element interactions in food material during deformation. The three configurations combine an inverted confocal scanning laser microscope (CSLM) and a cell that can apply to the sample a specific deformation: continuous shear, linear oscillatory shear and biaxial extension (compression).In the continuous shear and oscillatory shear configurations (OSCs), a zero-velocity plane is created in the sample by moving two plates in opposite direction, maintaining stable observation conditions of the structural behaviour under deformation. The OSC allows simultaneous application of CSLM and diffusing wave spectroscopy, a multiple light scattering technique. The third configuration (compression configuration) allows observation at a stagnation point during rheometric measurements. The configurations accept semi-liquid products (dressing, sauces, dairy products, etc.) for investigations in area such as aggregation, gelation, interactions at interface, coalescence, break-up.     

The Saccharomyces cerevisiae alcohol acetyl transferase Atf1p is localized in lipid particles

The yeast alcohol acetyl transferase I, Atf1p, is responsible for the major part of volatile acetate ester production in fermenting Saccharomyces cerevisiae cells. Some of these esters, such as ethyl acetate and isoamyl acetate, are important for the fruity flavours of wine, beer and other fermented beverages. In order to reveal the subcellular localization of Atf1p and further unravel the possible physiological role of this protein, ATF1::GFP fusion constructs were overexpressed in brewer's yeast. The transformant strain showed a significant increase in acetate ester formation, similar to that of an ATF1 overexpression strain, indicating that the Atf1p-GFP fusion protein was active. UV fluorescence microscopy revealed that the fusion protein was localized in small, sphere-like organelles. These organelles could be selectively stained by the fluorescent dye Nile red, indicating that they contained high amounts of neutral lipids and/or sterols, a specific characteristic of yeast lipid particles. Purification of lipid particles from wild type and ATF1 deletion cells confirmed that the Atf1p-GFP fusion protein was located in these organelles. Furthermore, a clear alcohol acetyl transferase activity could be measured in the purified lipid particles of both wild type and transformed cells. The localization of Atf1p in lipid particles may indicate that Atf1p has a specific role in the lipid and/or sterol metabolism that takes place in these particles.     

Engineered Neutral Phosphorous Dendrimers Protect Mouse Cortical Neurons and Brain Organoids from Excitotoxic Death

Nanoparticles are playing an increasing role in biomedical applications. Excitotoxicity plays a significant role in the pathophysiology of neurodegenerative diseases, such as Alzheimer’s or Parkinson’s disease. Glutamate ionotropic receptors, mainly those activated by N-methyl-D-aspartate (NMDA), play a key role in excitotoxic death by increasing intraneuronal calcium levels; triggering mitochondrial potential collapse; increasing free radicals; activating caspases 3, 9, and 12; and inducing endoplasmic reticulum stress. Neutral phosphorous dendrimers, acting intracellularly, have neuroprotective actions by interfering with NMDA-mediated excitotoxic mechanisms in rat cortical neurons. In addition, phosphorous dendrimers can access neurons inside human brain organoids, complex tridimensional structures that replicate a significant number of properties of the human brain, to interfere with NMDA-induced mechanisms of neuronal death. Phosphorous dendrimers are one of the few nanoparticles able to gain access to the inside of neurons, both in primary cultures and in brain organoids, and to exert pharmacological actions by themselves.     

Syntheses and characterizations of new copolymers of vinylidene cyanide with para substituted α acetoxystyrenes

Summary Vinylidene cyanide has been copolymerized in solution by radical reaction with equal initial mole fraction of para substituted acetoxystyrenes. The copolymers have been characterized by means of DSC, TGA and GPC. These products are stable up to 220° and have no visible glass transition temperature. The microstructure of these new copolymers has been studied by ¹³CNMR; they have an alternating structure and monomers units are arranged in head-to-tail placements.     

2-Methylthiazolidine and 4-ethylguaiacol,male sex pheromone components of the cockroachNauphoeta cinerea (dictyoptera,blaberidae): A reinvestigation

InNauphoeta cinerea, male calling behavior is associated with sex pheromone release by the sternal glands. The male pheromone that attracts females from a distance is a mixture of 2-methylthiazolidine and 4-ethylguaiacol. It is active at very low concentrations, 0.05 and 0.01 ng, respectively. Two other compounds, 3-hydroxy-2-butanone and 2-methyl-2thiazoline, act at close range, keeping the female in the vicinity of the male. The function of the volatile pheromone and those of previously described contact pheromones are discussed in regard to their possible involvement in the establishment of male dominant-subordinate relationships.     

Sol–Gel Processing and Microwave Characteristics of Ba(Mg⅓Ta⅔)O3 Dielectrics

The sol–gel method has been developed for the preparation of pure Ba(Mg_1/3Ta_2/3)O₃ ceramics. This involves the reaction of the heterometallic alkoxide Ta₂Mg(OEt)₁₂ with hydrated barium hydroxide Ba(OH)₂·8H₂O. Complete crystallization of the sol–gel-derived powder is achieved at 600°C, leading to a cubic perovskite type phase. After sintering at 1400°C (2–5 h), a trigonal cell arises from Mg–Ta ordering (the degree of order is greater than 0.9), and about 98.5% of the theoretical density is obtained. Preliminary microwave dielectric measurements show that the dielectric constant and the unloaded Q _u of the ceramics are 24.2 and 6750, respectively, at 7.7 GHz.     

Aging of HDPE Pipes Exposed to Diesel Lubricant

The effects caused upon the physicochemical behavior of high-density polyethylene pipes by exposure to a diesel lubricant were investigated, as a function of time and temperature, by thermogravimetric and gravimetric analysis and by FT-IR. The gravimetric data were satisfactorily described using Fick's law. The fitting of the experimental points showed that diesel, which can be regarded as a model fluid to analyze the effects caused by aromatic unities present in oil derivatives, has a high diffusion rate into HDPE. The FT-IR results showed that no main structural modifications have occurred after exposure, besides solubilization of low molecular weight units. From the analysis performed, physical aging was identified as the aging process occurring when the HDPE pipes came in contact with diesel lubricant.     

Use of hydroxytelechelic cis-1,4-polyisoprene (HTPI) in the synthesis of polyurethanes (PUs). Part 1. Influence of molecular weight and chemical modification of HTPI on the mechanical and thermal properties of PUs

New telechelic cis-1,4-polyisoprene oligomers bearing an hydroxyl group at the end of the polyisoprene backbone and possessing controlled molecular weights were used as soft segments in the elaboration of polyurethane elastomers. Besides, the well defined hydroxytelechelic cis-1,4-polyisoprene (HTPI) structure obtained through a controlled methodology, was chemically modified leading to hydrogenated and epoxidized oligomers based polyurethanes. The influence of the structural changes of these precursors on the polyurethanes properties have been studied. Thus, mechanical parameters as well as glass transition and mechanical transition temperature measurements indicated an increase in PUs hardness when the length of soft segment decreases and when the degree of epoxidized and hydrogenated isoprenic moieties increases. Moreover, based on thermogravimetric analysis (TGA), a linear relationship was established between the weight loss in the urethane stage degradation and the amount of hard segments in the PUs. Otherwise, the hydrogenated soft segments were found more thermally stable than the epoxidized and the non modified ones. By comparison with similar investigations developed from commercial oligodienes (PBHT R20 LM^® and EPOL^®), this study mainly showed that the PUs based on hydrogenated hydroxytelechelic cis-1,4-polyisoprenes were more thermally stable and softer than the EPOL^® based analogues.     

Molecular quantum spintronics: supramolecular spin valves based on single-molecule magnets and carbon nanotubes

We built new hybrid devices consisting of chemical vapor deposition (CVD) grown carbon nanotube (CNT) transistors, decorated with TbPc(2) (Pc = phthalocyanine) rare-earth based single-molecule magnets (SMMs). The drafting was achieved by tailoring supramolecular π-π interactions between CNTs and SMMs. The magnetoresistance hysteresis loop measurements revealed steep steps, which we can relate to the magnetization reversal of individual SMMs. Indeed, we established that the electronic transport properties of these devices depend strongly on the relative magnetization orientations of the grafted SMMs. The SMMs are playing the role of localized spin polarizer and analyzer on the CNT electronic conducting channel. As a result, we measured magneto-resistance ratios up to several hundred percent. We used this spin valve effect to confirm the strong uniaxial anisotropy and the superparamagnetic blocking temperature (T(B) ~ 1 K) of isolated TbPc(2) SMMs. For the first time, the strength of exchange interaction between the different SMMs of the molecular spin valve geometry could be determined. Our results introduce a new design for operable molecular spintronic devices using the quantum effects of individual SMMs.     

Measurement of enzymatic activity and specificity of human and avian influenza neuraminidases from whole virus by glycoarray and MALDI-TOF mass spectrometry

Influenza neuraminidases hydrolyze the ketosidic linkage between N-acetylneuraminic acid and its adjacent galactose residue in sialosides. This enzyme is a tetrameric protein that plays a critical role in the release of progeny virions. Several methods have been described for the determination of neuraminidase activity, usually based on colorimetric, fluorescent, or chemiluminescent detection. However, only a few of these tests allow discrimination of the sialyl-linkage specificity (i.e., α2-3- versus α2-6-linked sialyllactosides) of the neuraminidase. Herein we report a glycoarray-based assay and a MALDI-TOF study for assessing the activity and specificity of two influenza neuraminidases on whole viruses. The human A(H3N2) and avian A(H5N2) neuraminidase activities were investigated. The results from both approaches demonstrated that α2-3 sialyllactoside was a better substrate than α2-6 sialyllactoside for both viruses and that H5N2 virus had a lower hydrolytic activity than H3N2.