Kinoforms designed to produce different fan-out patterns for two wavelengths

Kinoforms (diffractive optical elements) were designed to produce different fan-out (i.e., spot) patterns when illuminated with green (543-nm wavelength) and red (633-nm) light. Three design examples are presented, each using one of three different techniques for this wavelength discrimination. If the fan-out pattern is to be produced in the near field (Fresnel region) of the kinoform, focusing-defocusing distinguishes between the two colors. For a far-field pattern the color distinction can be obtained either by active suppression of unwanted spots, which also decreases the diffraction efficiency, or, preferably, by an increase in the maximum phase modulation of the kinoform (to more than 2pi rad). All three examples were designed with a method based on the full scalar wave equation and optimal-rotation-angle optimization. The designed kinoforms were manufactured and performed, at least qualitatively, as predicted by the design.     

Kinoform-only Gaussian-to-rectangle beam shaper for a semiconductor laser

A kinoform that shapes the divergent beam from a semiconductor laser without using any other optical components was designed and fabricated. The kinoform-only concept means that the kinoform must perform both the actual beam shaping as well as focusing the divergent laser beam, correcting for the astigmatism of the laser, and correcting for the spherical aberration of the laser exit window. A rectangular beam of dimensions 1000 μm × 300 μm is formed 42 mm behind the kinoform. Of the total output from the laser, some 50% is incident upon the kinoform, of which ~50% will appear in the rectangular beam. The intensity uniformity error within the rectangle increases from the design value of 8% to 38% because of sensitivity to fabrication errors. The kinoform-only design for beam-shaping applications requires high manufacturing accuracy but is attractive because a system using such a component is easily mounted and aligned and, with the use of kinoform-replication techniques, can be mass produced at low cost.     

Beyond loop bounds: comparing annotation languages for worst-case execution time analysis

Worst-case execution time (WCET) analysis is concerned with computing a precise-as-possible bound for the maximum time the execution of a program can take. This information is indispensable for developing safety-critical real-time systems, e. g., in the avionics and automotive fields. Starting with the initial works of Chen, Mok, Puschner, Shaw, and others in the mid and late 1980s, WCET analysis turned into a well-established and vibrant field of research and development in academia and industry. The increasing number and diversity of hardware and software platforms and the ongoing rapid technological advancement became drivers for the development of a wide array of distinct methods and tools for WCET analysis. The precision, generality, and efficiency of these methods and tools depend much on the expressiveness and usability of the annotation languages that are used to describe feasible and infeasible program paths. In this article we survey the annotation languages which we consider formative for the field. By investigating and comparing their individual strengths and limitations with respect to a set of pivotal criteria, we provide a coherent overview of the state of the art. Identifying open issues, we encourage further research. This way, our approach is orthogonal and complementary to a recent approach of Wilhelm et al. who provide a thorough survey of WCET analysis methods and tools that have been developed and used in academia and industry.     

A modified design approach for compact ultra‐wideband microstrip filters

A modified design approach for compact ultra‐wideband microstrip filters with cascaded/folded stepped‐impedance resonators is described. The key feature of the proposed method is to facilitate stronger coupling between stepped‐impedance resonators and, at the same time, eliminate the requirement of extremely small gaps in coupled‐line sections, as found in traditional designs. Simulations and measurements demonstrate that the filters designed with this technique exhibit good reflection, insertion‐loss, and group‐delay performance within the 3.1–10.6 GHz band. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE 2010.     

Liquid recirculation in microfluidic channels by the interplay of capillary and centrifugal forces

We demonstrate a technique to recirculate liquids in a microfluidic channel by alternating predominance of centrifugal and capillary forces to rapidly bring the entire volume of a liquid sample to within one diffusion length, δ, of the surface, even for sample volumes hundreds of times the product of δ and the geometric device area. This is accomplished by repetitive, random sampling of an on-disc sample reservoir to form a thin fluid layer of thickness δ in a microchannel, maintaining contact for the diffusion time, then rapidly exchanging the fluid layer for a fresh aliquot by disc rotation and stoppage. With this technique, liquid volumes of microlitres to millilitres can be handled in many sizes of microfluidic channels, provided the channel wall with greatest surface area is hydrophilic. We present a theoretical model describing the balance of centrifugal and capillary forces in the device and validate the model experimentally.     

Adaptive Finite Element Simulation of the Time-dependent Simplified <Emphasis Type="Italic">P</Emphasis><Subscript><Emphasis Type="Italic">N</Emphasis></Subscript> Equations

The steady-state simplified P _N approximation to the radiative transfer equation has been successfully applied to many problems involving radiation. Recently, time-dependent simplified P _N equations have been derived by an asymptotic analysis similar to the asymptotic derivation of the steady-state SP _N equations (Frank et al. in J. Comput. Phys. 226:2289–2305, 2007). In this paper, we present computational results for the time-dependent SP _N equations in two dimensions, obtained by using an adaptive finite element approach. Several numerical comparisons with other existing models are shown.     

Outsourcing der Informationsverarbeitung im Mittelstand: Test eines multitheoretischen Kausalmodells

In this paper determinants of information systems (IS) outsourcing are deduced from transaction cost economic theory, resource-based theory and power theory. They are summarized in a theoretical framework which is tested using a sample of small and medium sized enterprises (SMEs) in Germany. The results show that internal performance and know-how deficits vis-à-vis external service providers are key determinants that explain why different IS functions are outsourced to varying degrees in SMEs. Moreover, the determinants of IS functions were found to partially differ between IS functions. Revised reprint of an article from WIRTSCHAFTSINFORMATIK 43(4)2001:339–350.     

Computer and Smartphone Continuance Intention: A Motivational Model

This paper develops and tests a motivational model to explain the overall continuance intention to use computers and smartphones. Based on survey data from 192 undergraduate students, structural equation modeling analysis is used to report: (1) the independent effect of intrinsic motivation on the continuance intention to use computers and smartphones; (2) the independent effect of extrinsic motivation on the continuance intention to use computers but not smartphones; (3) intrinsic motivation mediating the effect of extrinsic motivation on the continuance intention to use computers; (4) the independent effect of technology cognizance on the continuance intention to use computers but not smartphones; (5) intrinsic motivation positively influencing extrinsic motivation and technology cognizance, with respect to both devices. This research contributes to an improved understanding of the independent and interrelated effects of intrinsic and extrinsic motivations to use technological devices. The findings have important implications for theory and practice regarding the overall use of technology.