A new method of preform design in hot forging by using electric field theory

The preform design in metal forging plays a key role in improving product quality, such as ensuring defect-free property and proper metal flow. In industry, preforms are generally designed by the iterative trial-and-error approach. This approach, however, leads not only to the increase of significant tool cost but also to the extended down-time of the production equipment. It is thus necessary to reduce time and man power through an effective method of preform design. In this paper, the equi-potential lines designed in the electric field are introduced to find an appropriate preform shape. The equi-potential lines generated between two conductors of different voltages show similar trends for the minimum work paths between the undeformed shape and the deformed shape. Based on this similarity, the equi-potential lines obtained by the arrangement of the initial and final shapes are utilized for the design of the preform, and then the artificial neural network is used to find the range of initial volume and potential value of the electric field.     

Electromagnetic interference mitigation by using a spread-spectrumapproach

We investigate a new technique, referred to as spread-spectrum clock generation (SSCG), for reducing the level of radiated emission from devices with digital clock signals. To calculate the radiated emissions from such devices, we model the radiating geometry and compute the radiated field at a multitude of frequencies by using NEC-4, which is an electromagnetic field solver based on the method of moments (MoM). We consider a variety of modulating profiles for the spread spectrum clock and demonstrate that by using a frequency deviation of only 1%, we can achieve from 10 to 30 dB reduction in the radiated emission levels     

Dynamic sectorization of microcells for balanced traffic in CDMA:genetic algorithms approach

With the increase of cellular users, traffic hot spots and unbalanced call distributions are common in wireless networks. As a solution to this problem, code-division multiple-access techniques enable a base transceiver station to connect microcells with optical fibers and to control the channels by sectorizing the microcells. To solve the load balancing among microcells, we dynamically sectorize the microcells depending on the time-varying traffic. The microcell sectorization problem is formulated as an integer linear programming that minimizes the blocked and handoff calls in the network. In the proposed sectorization, proper, connected, and compact sectors are considered to keep the handoffs as small as possible while satisfying the channel capacity at each sector. Three genetic algorithms (GAs) are proposed to solve the problem: standard GA, grouping GA, and parallel GA. Computational results show that the proposed GAs are highly effective. All three GAs illustrate outstanding performance for small size problems. The parallel GA, which is based on the operators used in grouping GA, demonstrates excellent solution quality in a reasonable time     

50 nm MOSFETs with side-gates for induced source/drain extension

50 nm long MOSFETs with side-gates were optimised in terms of the side-gate length and successfully fabricated with conventional MOS technology. The simulated and fabricated 50 nm long MOSFET shows a reasonable subthreshold swing of 81 mV/dec and a low drain induced barrier lowering of 77 mV     

Rate-driven key frame selection using temporal variation of visualcontent

A simple and fast method to select the assigned number of key frames in a video shot is presented. The algorithm selects the key frames so that the temporal variation of visual content within a video shot is equally distributed to each key frame. Simulation results on a real video sequence are shown to be in agreement with the human visual perception     

A novel methanol-tolerant Ir-Se chalcogenide electrocatalyst for oyxgen reduction

A novel methanol-tolerant oxygen-reduction catalyst, Iridium-selenium (Ir-Se) chalcogenide, was synthesized by chemical precipitation in an organic solvent. Auger electron spectroscopy (AES) analysis confirmed that the synthesized Ir-Se chalcogenide had a chemical formula of Ir₄Se. This chalcogenide showed strong catalytic activity towards the oxygen reduction reaction (ORR) and a high methanol tolerance. It was found that most of the oxygen could be directly reduced to water through a four-electron pathway with less than 10% hydrogen peroxide (H₂O₂) being produced during the ORR. The improvement in catalytic activity of the Ir-Se chalcogenide in comparison with that of pure Ir might be attributed to the effect of a bimetallic interaction.     

Brain-computer communication: motivation, aim, and impact of exploring a virtual apartment.

The step away from a synchronized or cue-based brain-computer interface (BCI) and from laboratory conditions towards real world applications is very important and crucial in BCI research. This work shows that ten naive subjects can be trained in a synchronous paradigm within three sessions to navigate freely through a virtual apartment, whereby at every junction the subjects could decide by their own, how they wanted to explore the virtual environment (VE). This virtual apartment was designed similar to a real world application, with a goal-oriented task, a high mental workload, and a variable decision period for the subject. All subjects were able to perform long and stable motor imagery over a minimum time of 2 s. Using only three electroencephalogram (EEG) channels to analyze these imaginations, we were able to convert them into navigation commands. Additionally, it could be demonstrated that motivation is a very crucial factor in BCI research; motivated subjects perform much better than unmotivated ones.     

Proposed modification to the CIECAM02 colour appearance model to include the simultaneous contrast effects

A modified CIECAM02 colour appearance model, named CIECAM02‐m2, is proposed to enable CIECAM02 to predict the simultaneous contrast effect. The structure of the CIECAM02‐m2 is a development from CIECAM02, and contains two different procedures for modifying the reference white; one is for lightness and the other is for hue. The model was tested using a data set accumulated in this study and the LUTCHI data. The CV values for three colour attributes between predictions and experimental data were used to evaluate the accuracy of the model. The low CV values obtained show the performance of the CIECAM02‐m2 model to predict the simultaneous contrast effect satisfactorily. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 121 – 129, 2007