Distinct element method analysis of a retaining wall using a steel frame and fill materials

A technique is developed to clearly establish the shear resistance of a cellular structure, retaining wall composed of a steel frame and fill materials with both continuous and discontinuous characteristics. To overcome the limitation of the existing analysis approach based on continuum mechanics, in which the shear behavior and interaction between the frames and fill material of this type of structure are difficult to describe, this paper introduces displacement incremental analysis into the distinct element method. The results obtained by using the proposed approach are compared with experimental results to verify its accuracy. The results show an internal friction angle of fill materials and overburdening load are major factor determining the shear resistance of a retaining wall with a cellular structure type. From the results of the parametric study on the shear behavior of this type of structure, this paper also proposes a shear resistance moment-shear displacement formula for designing a retaining wall with a cellular structure type.     

An approach to multi-agent interactive control in an intelligent space

International Journal of Control, Automation and Systems - A new type of multi-agent interactive control is proposed in an intelligent space system, which is based on heterogeneous multiple vision...     

Ultra-low noise single-photon detector based on Si avalanche photodiode

We report operation and characterization of a lab-assembled single-photon detector based on commercial silicon avalanche photodiodes (PerkinElmer C30902SH, C30921SH). Dark count rate as low as 5 Hz was achieved by cooling the photodiodes down to -80 °C. While afterpulsing increased as the photodiode temperature was decreased, total afterpulse probability did not become significant due to detector's relatively long deadtime in a passively-quenched scheme. We measured photon detection efficiency >50% at 806 nm.     

Cognitive evaluation for conceptual design: cognitive role of a 3D sculpture tool in the design thinking process

ABSTRACT

This study focuses on the decisive role played by the digital design environment in the cognitive design process and design thinking. To analyse the cognitive role of digital design tools, we carried out a protocol analysis of conventional design sketching and a 3D sculpture tool. Cognitive evaluation was a differentiating factor when considering the contextual role of the 3D sculpture tool in subsequent evaluations, non-sequential evaluations for conversion, and passive approaches within the design process. Cognitive evaluation played the following roles: validation, extension, navigation, exploration, and confirmation. The navigation, exploration, and extension roles played by non-sequential evaluation were mainly related to inductive design thinking. Finally, the types of cognitive evaluation and their roles when using the 3D sculpture tool were different, according to the design thinking type. This study explored the multidimensional roles of cognitive evaluation using a 3D sculpture tool and its relationship with design thinking types.     

Color segmentation robust to brightness variations by using B-spline curve modeling

Color segmentation takes a great attention because color is an effective and robust visual cue for characterizing an object from the others. However, color segmentation suffers from color variations incurred by irregular illumination changes. We propose a reliable color modeling approach in hue–saturation–intensity (HSI) color space while considering intensity information by adopting the B-spline curve fitting to make a mathematical model for statistical characteristics of a color with respect to intensity. It is based on the fact that color distribution of a single-colored object is not invariant with respect to brightness variations even in the HS (hue–saturation) plane. The statistical characteristics contain the mean and standard deviation of hue and saturation with respect to intensity. They are mathematically expressed as four bar graphs. In order to fit the bar graphs to continuous curves, we use B-spline curve fitting procedure. From several experimental results, we verify that the proposed algorithm is successfully applied to color segmentation under various illumination conditions.     

12.1‐in. WXGA AMOLED display driven by InGaZnO thin‐film transistors

Abstract— A full‐color 12.1‐in.WXGA active‐matrix organic‐light‐emitting‐diode (AMOLED) display was, for the first time, demonstrated using indium‐gallium‐zinc oxide (IGZO) thin‐film transistors (TFTs) as an active‐matrix backplane. It was found that the fabricated AMOLED display did not suffer from the well‐known pixel non‐uniformity in luminance, even though the simple structure consisting of two transistors and one capacitor was adopted as the unit pixel circuit, which was attributed to the amorphous nature of IGZO semiconductors. The n‐channel a‐IGZO TFTs exhibited a field‐effect mobility of 17 cm²/V‐sec, threshold voltage of 1.1 V, on/off ratio >10⁹, and subthreshold gate swing of 0.28 V/dec. The AMOLED display with a‐IGZO TFT array is promising for large‐sized applications such as notebook PCs and HDTVs because the a‐IGZO semiconductor can be deposited on large glass substrates (larger than Gen 7) using the conventional sputtering system.     

Electron‐beam deposition of MgO on plastic substrate and manufacturing flexible flat fluorescent lamp

Abstract— A flexible fluorescent lamp that utilizes the same plasma discharge mode as in PDPs has been manufactured. The structure of the flexible lamp is simple and easy to manufacture. All‐plastic materials including plastic substrates, barrier ribs (spacers), and sealants for low‐temperature manufacturing processing have been adopted except for the phosphor and MgO thin film. The MgO thin films were coated on the plastic substrates as a protection layer against the plasma discharge. The adhesion and biaxial texture of MgO thin film deposited on the plastic substrates, poly‐ethyle‐nenaphthalate (PEN) and polycarbonate (PC), at low temperature (100–180°C) has been characterized. The MgO film on PEN shows good adhesion under a repeated bending test. The manufactured flexible lamp consists of two plastic substrates of about 3 in. on the diagonal, barrier rib (spacer), and external ITO electrodes. The Ne‐Xe (5%) gas mixture at 100–200 Torr was used for the discharge gas. A maximum surface luminance of about 100 cd/m² was achieved for a 1 ‐kHz AC pulse.     

User experimentation: an evaluation of velocity control techniques in immersive virtual environments

While many of the existing velocity control techniques are well designed, the techniques are often application-specific, making it difficult to compare their effectiveness. In this paper, we evaluate five known velocity control techniques using the same experimental settings. We compare the techniques based on the assumption that a good travel technique should be easy to learn and easy to use, should cause the user to have few collisions with the VE, should allow the user to complete tasks faster, and should promote better recollection of the environment afterwards. In our experiments, we ask twenty users to use each velocity control technique to navigate through virtual corridors while performing information-gathering tasks. In all cases, the users use pointing to indicate the direction of travel. We then measure the users’ ability to recollect the information they see in the VE, as well as how much time they spend in the VE and how often they collide with the virtual walls. After each test, we use questionnaires to evaluate the ease of learning and ease of use of the velocity control technique, and the users’ sense of presence in the environment. Each of the travel techniques is then evaluated based on the users’ performances in the VE and the results of their questionnaires.     

DEVS-Based modeling of VoIP spam callers’ behavior for SPIT level calculation

At the present time the VoIP (Voice over Internet Protocol) service is generally accepted as an alternative for people seeking cheaper means to make a phone call. Users of VoIP service may fall anywhere along a spectrum between types at two extremes: one of which is an ordinary caller who doesn’t use the telephone for commercial purposes, while the other is a person who generates spam calls for commercial purposes. The focus of this paper concerns modeling of spam callers’ behavior to calculate the SPIT (Spam over Internet Telephony) level for management of the quality of service. From the perspective of a VoIP service provider’s view, spam callers are also a type of customer and sometimes they are valuable for increasing revenue. However, if a service provider does not manage spam calls, it can harm their business, because ordinary users might not receive phone calls using the phone numbers of the VoIP service. Thus, there is a trade-off between revenues and usability in managing spam calls in the VoIP service. This work presents a model of spam caller’s behavior using the DEVS (Discrete Event System Specification) formalism. The DEVS formalism is applicable as a model of behavior, by defining the state and state transition of the target of the model. In our model, we use six main parameters to define the states and state transitions. Each state is represented by a number which indicates the SPIT level of a caller. If the value is 1.0 then the caller is more similar to a spam caller. Based on the model definition, we constructed a SPIT level Calculation UI (User Interface) that is used to manage spam calls to improve VoIP service quality.