Buchbesprechungen

Ohne Zusammenfassung     

A video codec LSI for high-definition TV systems withone-transistor DRAM line memories

A video codec LSI for high-definition television (HDTV) systems has been developed. By using a time-compressed integration encoding technique, it converts a 20.0-MHz bandwidth luminance signal and two 5.0-MHz chrominance signals into a compressed image signal at 48.6-MHz sampling frequency. It is useful in many HDTV application systems, such as 400-Mb/s digital transmission system, a video disk player system, or an analog transmission system. Over 288000 elements, including a 52-kb one-transistor DRAM (dynamic random access memory) line memory specially developed for this LSI, were integrated on a 12.16×12.10-mm² chip. A standard cell layout method and a 1.2-μm CMOS logic LSI process were used     

CAL delivery selection criteria and authoring systems

Abstract  In the past, authoring systems have been used to generate computer-assisted learning materials that have often followed the rather restrictive programmed learning format. A number of innovative ways of using recently developed systems to develop CAL packages that include a wider range of learning activities (access to data bases, simulations, interactive video, etc.) are described. Analogous to the concept of a media selection model, a computer delivery mode selection model is presented as an aid to decision making for designers. This increase in flexibility should broaden the applicability of computerassisted learning (CAL) to a wider range of educational objectives and raise the level of the cognitive emphasis in learning packages, as well as facilitate the implementation of visually appealing materials. The paper also implies a standard of acceptability for authoring systems.     

MODELING LIGNIN LIQUEFACTION 1. CATALYTIC HYDROPROCESSING OF LIGNIN-RELATED METHOXYPHENOLS AND INTERAROMATIC UNIT LINKAGES

The reactions of two sets of lignin model compounds over a sulfided CoOMoO3/γ-Al2O3 catalyst were studied. The first set mimicked lignin methoxyphenol residues and comprised 4-methyl-guaiacol, 4-methyl catechol, eugenol and vanillin. Deoxygenation and hydrogenation were facile and led to ultimate molar yields of single-ring products as high as 0.70. The selectivity to single-ring products increased with increases in temperature, o-hydroxydiphenylmethane, phenyl ether and o,o'-biphenol constituted the second set that mimicked thermally stable lignin bonds.Fragmentation of o-hydroxydiphenylmethane and phenyl ether occurred readily; o,o'-biphenol reacted to dibenzofuran.

These results suggest that the single-ring products obtained from catalytic liquefaction of lignins should be more desirable than those obtained from pyrolysis because of both higher yields and reduced complexity.     

Nonlinear inverse problem of reconstructing transport coefficients

The inverse coefficient problem for the quasilinear heat-conduction equation is solved numerically.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 6, pp. 909–915, December, 1985.     

Microstructure evolution during mechanical working of three RS aluminium alloys: Al-4Cr-1Fe,Al-5Cr-2Zr and Al-6.43Cr-1.67Zr

Three Al-Cr alloys containing additions of Zr and Fe have been fabricated via cold compaction and hot extrusion. The decomposition of the powder microstructure and the subsequent coarsening during thermomechanical treatment have been studied. Detailed electron microscopy investigations were performed at different locations of partially extruded billets at 450 °C. The microstructure of the dead metal zone reflects the effect the induction heating exerts on the as-atomized powder microstructure. In the low Cr alloys, Al-4Cr-1 Fe and Al-5Cr-2Zr, decomposition of the rapidly solidified microstructure commences at the rich intercellular network, whereas the microstructure of the Al-6.43Cr-1.67Zr alloy remains relatively unaffected. Within the deformation zone the precipitation kinetics are affected by the shearing and the temperature rise. The cells and the powder particles are aligned along the extrusion direction. Precipitation is taking place within the primary segregation-free areas, observed in Al-4Cr-1 Fe and Al-5Cr-2Zr alloys, whereas in the Al-6.43Cr-1.67Zr alloy, decomposition of the powder microstructure starts at the Cr-rich intermetallic particles. The as-extruded microstructure is fibrous and heterogeneous. The heterogeneity of the as-extruded microstructure is a result of the microstructural variation observed within different size powder particles and within individual ones.     

Hybrid Link/Path-Based Design for Translucent Photonic Network Dimensioning

The advancement of ultralong-haul transmission technology has dramatically enhanced the all-optical reaches. However, the actual situations of installed fiber and sites for terrestrial network often prevent implementing a purely transparent network, and thus, opaque reshaping retiming regenerating (3R) regeneration is required to guarantee optical signal reachability. Since 3R regenerators based on optical/electrical/optical conversion tend to dominate the total network costs, an efficient network design method that allocates a minimum number of 3R regenerators to optimum locations is essential to build a cost-effective photonic network. In this paper, we propose such a network-dimensioning method by combining the advantages of link-based and path-based design approaches. It first guarantees optical signal reachability for any possible traffic demand in each segmented linear link. After combining all the links, excessive regenerators are eliminated based on the optical signal quality check with -factor calculation for each wavelength path. A trial design of a large-scale mesh network demonstrated a significant cost savings of more than 30% in comparison with a conventional link-based design. In the trial, the impact of fiber loss coefficient over the total network cost was investigated quantitatively, addressing the importance of such quantitative modeling and analysis.     

Transient conduction in a slab with chemical reaction

The heat-balance integral technique is used to analyse a one-dimensional transient conduction process. Heat is transferred by convection to the surface of a slab and when the surface temperature reaches a certain value, an endothermic reaction is triggered which propagates as an isothermal front in the same direction as the conduction front. Two possible routes to the fully developed heat transfer condition are treated in a way which allows the approximate temperature distribution in the slab to be predicted as a function of the main process variables.     

Effective lake basin management institutions: lessons from African lakes.

Weak or non-existent institutions are often cited as a major constraint facing management of many lake basins in Africa. By their nature lake basins cut across many sectoral and jurisdictional interests and therefore it is always the case that management of the basins is affected by actions within the various sectors and jurisdictions. Because of the complex nature of issues within lake basins, authority over management of lake basins is dispersed among several institutions, with no single institution having overall authority. Under these circumstances, a major challenge in lake basin management is how to ensure effective coordination among the various players. This paper reviews the situation of lake basin management at eight African lake basins and draws important lessons about lake basin management institutions. It is noted that fragmented approaches, lack of coordination across sectors, and lack of monitoring and enforcement are major institutional weaknesses. Also, it is observed that political will and commitment are essential for the management of African lake basins.