Hypoxia/Temperature/pH Triple Stimuli–Responsive Block Copolymers: Synthesis,Self-Assembly,and Controlled Drug Release

The amphiphilic block copolymer poly(methacrylic acid-co-2-nitroimidazole acrylate)-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) (P(MAA-co-NIMA)-b-PDMAEMA) with the hypoxia/temperature/pH triple responsiveness is synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT), hydrolysis, and 3-(3-dimethylaminopropyl)-1-ethylcarbodiimide (EDC) reactions, and successfully self-assembled into micelles. The hypoxia response in vitro is realized, and then the sensitivity of the self-assembled micelles to the hypoxia condition is studied by controlling the grafting amount of aminated 2-nitroimidazole. Because 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) is a typical material sensitive to temperature and pH conditions, the self-assembled micelles are also responsive to temperature and different acidic/basic conditions. In addition, the cumulative release rate of doxorubicin (DOX) at 42 °C, pH = 6.0, and hypoxic conditions increases significantly, and verifies the synergistic promotion effect of the above stimulations. This intelligent polymer with triple response mechanism improves the controllability and efficiency of drug release, and is expected to be a drug carrier for cancer treatment.     

3D Printing Conductive Composites with Poly(ionic liquid) as a Noncovalent Intermedia to Fabricate Carbon Circuits

In this study, a kind of imidazole type poly(ionic liquid) ([PEP-MIM]Cl) is synthesized, which can disperse carbon effectively. [PEP-MIM]Cl is used as an intermediate to coat carbon on the poly(acrylic acid)(PAA-co-MBA) via ion exchange to obtain conductive polymer composite (CPC). A series of characterizations are performed. Experiments show that carbon can be coated on the PAA-co-MBA uniformly, and compared with using carbon as filler, this method requires less carbon to achieve good conductive performance. The carbon layer on the polymer's surface is enriched via the swelling-shrinking properties of PAA-co-MBA according to the SEM images. Furthermore, in combination with 3D printing technology, PAA-co-MBA can be designed into different shapes to achieve various functions such as pressure-sensing element. Finally, a new type of CPC named carbon clad polymeric laminate (CCPL) is prepared by using the carbon coating method and 3D printing technology. It has the potential to replace copper clad laminate (CCL) and printed circuit board (PCB), to a certain extent. This technology expands the preparation method and application of the CPC such as flexible and wearable conductive fabrics.     

燃气轮机余热发电系统方案选择

综合利用不同型号燃气轮机余热的发电系统,根据水泥厂自备电站的不同型号燃气轮机余热情况,拟定余热发电技术方案,分析比较不同方案下余热发电系统的技术指标,从而选择合理的技术方案。     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

高精度冷轧带钢的开发前景

通过对高精度冷轧带钢的市场调研和重点项目分析，提出对该产品开发工作的建议。     

Mn含量对Mg2Ni型合金相形成及放电性能的影响

采用按比例混合合金粉末压制成圆柱试样，然后用低温烧结和随后机械球磨的方法制备了非晶态的Mg2Ni型合金。研究了烧结和球磨对不同Mn含量的Mg2Ni型合金的相形成过程及电化学性能的影响。实验表明：在Mg2Ni中采用第三组元Mn对Mg进行适量的替代后，通过烧结及球磨方法可以获得均匀的非晶相；微量替代可有效地提高其放电容量：随替代量的增加，合金最大放电容量和高速放电能力降低，而充放电循环稳定性提高。     

稀燃车用催化剂的研究进展

稀燃车用催化剂是汽车尾气净化催化剂今后发展的方向，在稀燃条件下如何处理NOx是稀燃车用催化剂面临的巨大挑战。本文详细地评述了近年来国内外在这方面的研究工作，包括选择催化还原催化剂、存储还原催化剂和组合多功能催化剂的研究进展。     

Wear resistance of ceramic coating on AZ91 magnesium alloy by micro-arc oxidation

The ceramic coating formed on AZ91 magnesium alloy by micro-arc oxidation （MAO） was characterized. The results show that the ceramic coating （3.4-23 μm in thickness）on the surface ofAZ91 alloy was attained under different micro-arc oxidation treatment conditions, which consist mainly of MgO, Mg2SiO4 and MgSiO3 phases. Nano-hardness in a cross-sectional specimen was determined by nano-indentation experiment. The MAO coatings exhibit higher hardness than the substrate. Dry sliding wear tests for the MAO coatings and AZ91 alloy were also carded out using an oscillating friction and wear tester in a ball-on-disc contact configuration. The wear resistance of the MAO coatings is improved respectively under different treatment time as a result of different structures of ceramic coatings formed on AZ91 alloy.     

脱硫塔501-EA的焊接修复

脱硫分厂脱硫塔焊缝缺陷威胁生产，修复后有效消除了隐患，延长设备使用寿命，现系统运行良好。     

共烧陶瓷多层基板技术及其发展应用

论述了高温共烧陶瓷与低温共烧陶瓷的优缺点，并讨论了多层共烧陶瓷的材料选择、工艺过程与控制，然后在提高材料性能方面提出了一些建议和方法，同时介绍了多层共烧陶瓷的国内外研究状况及今后的发展趋势。