Hypoxia/Temperature/pH Triple Stimuli–Responsive Block Copolymers: Synthesis,Self-Assembly,and Controlled Drug Release

The amphiphilic block copolymer poly(methacrylic acid-co-2-nitroimidazole acrylate)-b-poly(2-(N,N-dimethylamino)ethyl methacrylate) (P(MAA-co-NIMA)-b-PDMAEMA) with the hypoxia/temperature/pH triple responsiveness is synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT), hydrolysis, and 3-(3-dimethylaminopropyl)-1-ethylcarbodiimide (EDC) reactions, and successfully self-assembled into micelles. The hypoxia response in vitro is realized, and then the sensitivity of the self-assembled micelles to the hypoxia condition is studied by controlling the grafting amount of aminated 2-nitroimidazole. Because 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) is a typical material sensitive to temperature and pH conditions, the self-assembled micelles are also responsive to temperature and different acidic/basic conditions. In addition, the cumulative release rate of doxorubicin (DOX) at 42 °C, pH = 6.0, and hypoxic conditions increases significantly, and verifies the synergistic promotion effect of the above stimulations. This intelligent polymer with triple response mechanism improves the controllability and efficiency of drug release, and is expected to be a drug carrier for cancer treatment.     

燃气轮机余热发电系统方案选择

综合利用不同型号燃气轮机余热的发电系统,根据水泥厂自备电站的不同型号燃气轮机余热情况,拟定余热发电技术方案,分析比较不同方案下余热发电系统的技术指标,从而选择合理的技术方案。     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

高精度冷轧带钢的开发前景

通过对高精度冷轧带钢的市场调研和重点项目分析，提出对该产品开发工作的建议。     

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Mg-Li ALLOY WITH Ca ADDITION

Mg-9wt%Li-2wt%Zn alloy was prepared and studied in this article. The addition of Ca to the alloy from 0.1wt% to 1wt% can refine the α-Mg and the best effect of refinement occurs when Ca content is 0.4wt%-0.5wt%. The billets can be rolled to thin sheets at room temperature, from which it is obvious that the addition of Ca improves alloys ormalin. while it decreases with the excess addition of Ca. The results also show that the ultimate tensile strength （UTS） and yield strength （YS） of the alloy with lwt% Ca may rise by 28% and 25%, respectively, however, the elongation decreases. It is clarified that the adsorption of proper Ca on the grain boundaries refines α-Mg and improves the tensile properties, but the presence of excess Ca and stable Ca2Mg6Zn3phase worsens the elongation.     

微量Mn对纯银的性能影响

在99.995%Ag中添加0.01wt%Mn，制成99.99%银材，进行机械性能测试。当ε=97%时，在25℃下，σb＝340MPa，Hv＝103保持365d稳定不变，即在高纯Ag中存在微量Mn，能细化Ag的晶粒。晶粒小，晶界增多，变形抗力增大，起到强化和稳定机械性能的作用。     

液相还原法制备纳米银粉的研究

在液相联氨还原法工艺基础上，对液相还原法制备纳米银粉的还原反应条件（体系温度、分散剂、反应物浓度）进行了研究，得到了优化的反应条件；反应体系温度70℃，反应物浓度[Ag[NH3]2^ ]=0.02mol/l和特定的分散剂2^#。且冬季同平均粒径约为50nm、大小均匀、灰白色的球状银粉。