岩体平巷充气降氡技术研究

提出了一种适用于破碎山体中平巷的降氡技术.该巷道中氡浓度受山体内空气渗流方向和强度的控制,渗流的机制是烟囱效应.由于山体内空气的温度基本恒定,因而密度不变,而巷道外空气密度随温度的变化而相应地变化着,这就导致了山体内外空气的失衡--夏季山体内含氡空气经裂缝流入巷道,冬季巷道外新鲜空气流入巷道后再经山体裂缝流向大气.实验表明,通过在巷道口部设置自动风门,向巷道内机械压风,形成充气状态,可以调节山体内空气的渗流方向,从而可以显著降低巷道内氡的浓度.     

大直径薄壁筒件的加工

通过设计研究和生产实践,制定出合理的加工工艺,再配以相应的辅具,完成了加工大直径薄壁件的任务,为以后类似零件加工打下了基础。     

X094测量仪的改造与调心轴承径向游隙测量

根据调心轴承对用仪器测量径向游隙的基本要求,改造了X094测量仪,并在实践中找出适宜的调试测量方法。     

Phloroglucinol Derivative Carbomer Hydrogel Accelerates MRSA-Infected Wounds’ Healing

Globally, wound infection is considered to be one of the major healthcare problems, with bacterial infections being the most critical threat, leading to poor and delayed wound healing, and even death. As a superbug, methicillin-resistant Staphylococcus aureus (MRSA) causes a profound hazard to public health safety, prompting us to search for alternative treatment approaches. Herein, the MTT test and Hoechst/propidium iodide (PI) staining demonstrated that PD was slightly less toxic to human fibroblasts including Human keratinocytes (HaCaT) cell line than Silver sulfadiazine (SSD), and Vancomycin (Van). In the MRSA-infected wound model, PD hydrogel (1%, 2.5%) was applied with for 14 days. The wound healing of PD hydrogel groups was superior to the SSD, Van, and control groups. Remarkably, the experimental results showed that PD reduced the number of skin bacteria, reduced inflammation, and upregulated the expression of PCNA (keratinocyte proliferation marker) and CD31 (angiogenesis manufacturer) at the wound site by histology (including hematoxylin–eosin (HE) staining, Masson staining) and immunohistochemistry. Additionally, no toxicity, hemocompatibility or histopathological changes to organs were observed. Altogether, these results suggested the potential of PD hydrogel as a safe, effective, and low toxicity hydrogel for the future clinical treatment of MRSA-infected wounds.     

丙烯酸酯类反应性微凝胶的制备及其对环氧树脂的增韧作用

采用自稳定分散聚合法,制备了粒径在20nm左右、粒径分布均匀的球形丙烯酸酯类反应性微凝胶;同时研究了其对环氧树脂/间苯二胺(MPDA)体系的增韧效果.结果表明,所制备的丙烯酸酯类反应性微凝胶在室温下呈橡胶态;它是环氧树脂/MPDA体系的一种有效增韧荆,增韧效果受其用量、官能团种类及用量的影响;含有环氧基团的微凝胶颗粒,增韧效果最好,而且提高了环氧树脂的热性能:带有环氧基团的微凝胶颗粒用量越大,或丙烯酸酯类微凝胶中环氧基团的摩尔分数越高,对环氧树脂的增韧效果越好.     

β-PP/PA 6合金的结晶与熔融行为

为了研究β-成核剂在合金中分散对聚丙烯（PP）成核效率的影响,采用2种方法制备了负载型β-成核剂成核PP（β-PP）／聚酰胺6（PA6）合金。用差示扫描量热仪和广角X射线衍射仪研究了不同制备方法及熔融温度对β-PP／PA6合金的结晶行为、熔融特性和β-PP含量的影响。结果表明：PP,PA6先熔融再降温至／90℃加入成核剂制备β-PP,PA6合金的β-PP含量高于先制备β-PP再与PA6混炼制备的合金。熔融温度高有利于β-PP／PA6合金中PP形成β-PP。     

DSP处理器在电力系统应用中的算法实现

ＤＳＰ处理器在电力系统中的应用比较晚。针对电力系统中数据采集和处理的实际特点,介绍了如何应用ＤＳＰ处理器峄各类数据的测量和处理,并给出了相应的算法实现。     

基于小波变换和LSTM模型的城市天然气负荷预测

城市燃气公司为防止出现储气量过剩或不足等问题,必须要对天然气负荷量进行预测.对此,提出一种基于小波变换和长短期记忆网络的深度学习模型(wavelet_LSTM),对未来一年的天然气日负荷量进行预测.在某市燃气公司真实数据集上的实验结果表明,该模型有较高的准确性,可以较好地满足城市燃气公司的业务需求.