Preparation of Metal-Coated Carbon Fiber Reinforced Composites and Their Electromagnetic Properties

Medium temperature curing by infrared radiation was used to prepare electromagnetic wave absorbing multilayered plastic matrix composite materials containing metal-coated carbon fibers (MCFs). The electromagnetic properties of the materials were investigated by frequency scanning tests with microwave vector network analyzer. It is found that the electromagnetic parameters, mainly permittivity of the composites increase significantly with the addition of MCFs, which gives the composites good designability as thin, light-weight EM wave absorbers. It is also shown that MCFs can improve on the EM wave energy attenuating property of the composites by widening the work frequency band width and raising the absorptive peak     

军用滑木箱的设计分析

介绍了按日本标准设计的横板式和国内竖板式军用滑木箱的结构设计参数，从木箱抗弯、抗静压及顶盖抗弯三方面对比了两种木箱的力学性能，分析了两种木箱的特点及适用范围。     

连续驱动摩擦焊动态扭矩检测的新方法—VCMM法

连续驱动摩擦焊动态扭矩检测的新方法──ＶＣＭＭ法刘金合，罗键连续驱动摩擦焊扭矩是一个重要的工艺参数。摩擦焊扭矩是动态扭矩，具有时变性、速变性以及变化范围大等特点。现有的检测摩擦焊扭矩的方法均有一定的局限性’‘－’‘，本文提出了通过驱动主电机定子电压和...     

项重写系统的并行实现方案

项重写系统的并行归约可以提高归约的效率，在无共享内存的Ｔｒａｎｓｐｕｔｅｒ网络上实现时要考虑任务的分配，项的拼装，归约任务的控制等问题，其中怎么样减少机间的机内进程的通信慢提高系统效果的关键。本文从控制方式角度讨论在不同拓扑结构的Ｔｒａｎｓｐｕｔｅｒ网络上实现项重写系统的方案，重点介绍基于树形结构下的控制方法，进程安排和通讯形式。     

Failure analysis of bellows under external pressure

As is the case of a bellows under internal pressure, there also exists a condition for plastic failure when a bellows is loaded under external pressure. In this paper calculating formulae of the critical failure pressure under external pressure are suggested and analyzed by comparing the calculated results and the experimental ones. Close agreement is obtained.     

应用音平化渣图象分析和指导转炉造渣操作

利用音平化渣图象可以清晰地看出在转炉造渣过程中何时发生喷溅，何时发生炉渣返干和何时化渣正常。应用音平化渣图象和炉渣三元相图，可以正确地分析发生喷溅和返干的原因，从而找到避免突发性喷溅和严重返干的方法。正确的枪位和炉渣碱度控制是实现平稳吹炼的保证，而音平化渣图象能帮助操作工实现这一目标。     

多级脉冲深穿透射孔技术

目前国内较先进的射孔工艺是增效射孔和三相流射孔,这2种射孔工艺均存在射孔深度和造缝深度浅的问题,尤其是对低渗油藏和纵向渗透率远大于横向渗透率的油藏,此造缝深度并不能满足油田生产的需要.介绍了一种新型的射孔技术,它是一种能进行深度射孔造缝的多级射孔技术,利用三级推进剂燃爆时产生峰值不连续的高温、高压气流,形成多级脉冲,多次冲击射孔孔眼前沿的裂缝,使其有效延伸至地层深处,从而较单独的射孔更能有效地增加油气产量.通过地面水泥靶的试验,证明了该射孔器的延缝功能和安全性;通过塘32等井的现场试验,证明该射孔技术对污染地层解堵有显著效果,可明显地降低地层破裂压力.     

Boron removal by titanium addition in solidification refining of silicon with Si-Al melt

In order to effectively remove B from Si for its use in solar cells, a process involving B removal by solidification refining of Si using a Si-Al melt with Ti addition was investigated. For clarifying the effect of Ti addition on B removal from the Si-Al melt, TiB₂ solubilities in Si-64.6 at. pct Al melt at 1173 K and Si-60.0 at. pct Al melt at 1273 K were determined by measuring the equilibrium concentrations of B and Ti in the presence of TiB₂ precipitates. The small solubilities of TiB₂ in the Si-Al melt indicate the effective removal of B from the Si-Al melt by Ti addition. Further, solidification experiments of Si-Al alloys containing B by Ti addition were performed, and the effect of Ti addition on the solidification refining of Si with the Si-Al melt was successfully confirmed.     

An explanation of disproportionate growth using linear 3-dimensional informetrics and its relation with the fractal dimension

Summary We study new and existing data sets which show that growth rates of sources usually are different from growth rates of items. Examples: references in publications grow with a rate that is different (usually higher) from the growth rate of the publications themselves; article growth rates are different from journal growth rates and so on. In this paper we interpret this phenomenon of “disproportionate growth' in terms of Naranan's growth model and in terms of the self-similar fractal dimension of such an information system, which follows from Naranan's growth model. The main part of the paper is devoted to explain disproportionate growth. We show that the “simple' 2-dimensional informetrics models of source-item relations are not able to explain this but we also show that linear 3-dimensional informetrics (i.e. adding a new source set) is capable to model disproportionate growth. Formulae of such different growth rates are presented using Lotkaian informetrics and new and existing data sets are presented and interpreted in terms of the used linear 3-dimensional model.     

激光辐照对不同饵料微藻生长的影响

利用Nd:YAG激光(波长1.06μm,功率5W,照射时间0.5-3min)和Ar 激光(波长:488nm,功率70mw,照射时间5-20min)分别照射角毛藻和叉鞭金藻,辐照后进行细胞增殖和生长速率的测定。实验结果表明:照射剂量为1min的Nd:YAG激光及剂量为5min的Ar 激光对叉鞭金藻有较明显的促长效果,这两种激光处理组的细胞增殖量在辐照后的两天内较对照组分别高42.9%和48.1%,但这种促长效果随时间的推移逐渐消失。不同剂量的两种激光辐照角毛藻后,在延滞期均出现生长抑制现象,但进入指数生长期或传代培养后,剂量为1min的Nd:YAG激光及剂量为10min的Ar 激光对角毛藻有明显的促长效果,其中在指数生长期1min剂量的Nd:YAG激光处理可促长27.0%,传代培养后10min的Ar 激光处理组生长速率提高达51.2%。本文对不同激光及不同激光参数条件下,两种饵料藻的耐受性及生长特性的差异也进行分析探讨。本实验结果不仅证实了已有研究的推论,还展示出激光技术在饵料藻种选育中的应用前景。