巨型水轮发电机励磁电流及影响因素

为了准确地获得空载和额定负载时的励磁电流,在充分考虑直交轴磁场饱和效应的基础上,利用时变电磁场有限元法计算1000MW水轮发电机在空载和额定负载时的励磁电流.分析了励磁绕组尺寸、阻尼条节距比以及磁性槽楔等相关因素对励磁电流的影响,在获得空载和额定负载励磁电流的基础上,提出了励磁绕组尺寸、阻尼条节距比的设计准则,并从电磁设计的角度论证了磁性槽楔应用于1000MW水轮发电机上的可行性.实验结果表明,有限元法可以用于1000MW水轮发电机的励磁电流计算,为工程设计提供了理论依据.     

面向方面的XML结构连接算法的改进

为了解决在多文档下插入节点或需要修改节点编码时查询效率比较低的问题,提出了一种有效的结构连接算法.在分析现有单文档下的XML结构连接算法基础上,对祖先/后裔与双亲/孩子结构查询进行改进,基于归并思想解决多文档下的结构连接,以适应在面向方面的XML Schema中定义的基于多文档的查询.改进后的结构连接算法可以进一步利用XML数据的特点、索引和织入文档信息减少连接扫描的代价,具有一定的合理性、有效性和实用性.     

The electrical properties and snow melting of graphite slurry infiltrated steel fiber concrete

The conductivity property of graphite slurry infiltrated steel fiber concrete (GSIFCON) was investigated by the four-probe method. The experimental results show that the electrical resistivity of GSIFCON decreases significantly at a specific concentration of graphite, i e, the percolation concentration. A model was accordingly developed to explain its conductive mechanism, where graphite particles could be served as bridge for conductive network between unconnected fiber chains. For an application, snow melting test of GSIFCON was carried out and a simple heating power analysis was performed. The results reveal that the thermal energy produced by GSIFCON makes snow melting effectively and the electrothermal efficiency can reach approximately 20%.     

Consolidation and microstructures of microwave sintered W-25Cu alloys with Fe addition

W-25Cu alloys were microwave sintered in a 2.45 GHz multimode applicator. The densification, microstructure and their dependence on sintering mode and Fe addition were investigated in detail. Owing to the volumetric heating intrinsic in microwave processing, a microstructure with larger W grain size in center regions was observed as against larger grain size in edge regions for conventional sintering. Microwave sintering demonstrates its intrinsic advantages such as rapid heating rate, densification enhancement and microstructural homogeneity; but it undesirably promotes W grain growth. Under microwave sintering, the role of Fe addition on compact consolidation is not so substantial as under conventional sintering. Moreover Fe degrades the microstructural quality, generating worse uniformity and coarser W grains.     

Characterization of calcined kaolin/TiO<Subscript>2</Subscript> composite particle material prepared by mechano-chemical method

Calcined kaolin/TiO₂ composite particle material (CK/TCPM) was prepared with TiO₂ coating on the surfaces of calcined kaolin particles by the mechano-chemical method. X-ray diffraction (XRD) and scanning electron microscope (SEM) were used to investigate the microstructures and morphologies, respectively. The mechanism of the mechano-chemical reaction between calcined kaolin and TiO₂ was studied by infrared spectra (IR). The results show that TiO₂ coats evenly on the surfaces of calcined kaolin particles by Si-O-Ti and Al-O-Ti bonds on their interfaces. The hiding power and whiteness of CK/TCPM are 17.12 g/m² and 95.7%, respectively, presenting its similarity to TiO₂ in pigment properties.     

High-g impact resistance for epoxy molding compound

The behavior of resistance high-g impact of EMC (epoxy molding compound) with two package models, small outline package (POS) and Globtop, was evaluated by experimental method used Hopkinson bar. At 120,000 g (generated in the Hopkinson bar with widths about 70 μ s) no damage in either the POS devices or the Globtop devices was observed. In order to enhance the EMC’s ability of resistance high-g impact, buffering effect of epoxy resin was also studied. The experimental results above all show that EMC has a better performance of impact resistance at about 120,000 g, and epoxy resin can absorb the stress wave to have the protected ability. The study of this paper could serve as a basis for selection packaging materials and enhance its reliability in high-g impact environment.     

Effects of curing systems on properties of high volume fine mineral powder RPC and appearance of hydrates

The effects of different curing systems on the properties of high volume fine mineral powder RPC (reactive powder concrete) and the appearances of hydrates were studied. The experimental results show that dry-heating curing promotes the development of pozzolanic reactivity of fine mineral powder; due to low cement content, 0.20 water-bind ratio and high reactive fine mineral powder content, the strength of RPC increases by around 200% after steam curing and subsequent dry-heating curing. Scanning electron microscopy and energy spectrum diagram showed that: after the high volume fine mineral powder RPC with 0.16 water-bind ratio underwent steam curing and dry-heating curing, there was no significant change in the appearance of hydrates; after the RPC with 0.20 water-bind ratio, the cement content of 150 kg/m³ and more steel slag powder underwent dry-heating curing, there was a certain change in the appearance of C-S-H, the structure of gel was more compact and was uniformly distributed, and the Ca/Si of C-S-H gel decreased from 1.41 to around 1.20.     

Oily wastewater treatment by porous ceramics mediums with surface lipophilic modification

Aiming at the treatment of difficult-to-handle oily wastewater, the ceramics filter mediums made from the iron and steel plant sludge were adopted to surface lipophilic modification so as to remove oil efficiently. The hydrolysis technique by FTIR and conductivity test indicated that under acid conditions hydrogen silicon oil did not hydrolyze but release hydrogen by chemical reaction under alkaline conditions. The results of the experiments including contact angle measurement, FTIR analysis, and SEM analysis illustrate that a layer of lipophile coating indeed exists evenly on the surface of filter mediums after modification. Furthermore, the hydrogen-containing silicone oil was combined through dehydration of Si-H bond with the -OH on the surface of ceramic filter medium.     

Crystallization and conductivity mechanism of ITO films on different substrates deposited with different substrate temperatures

ITO thin films were grown on PC(polycarbonate), PMMA(polymethyl methacrylate) and glass substrates by r.f. magnetron sputtering. The electrical, structural and chemical characteristics of ITO films were analyzed by the Hall Technique, X-ray diffraction, and X-ray photoelectron spectroscopy. XPS studies suggest that all the ITO films consist of crystalline and amorphous phases. The degree of crystallinity increases from less than 45% to more than 90% when the substrate temperature increases from 80 to 300 ℃. The In and Sn exist in the chemical state of In3+ and Sn4+, respectively, independent of substrate type and temperature. The enrichment of Sn on surface and In in body of ITO films are also revealed. And, the oxygen deficient regions exist both in surface layer and film body. For ITO films deposited under 180 ℃ , the carrier concentration are mainly provided by oxygen vacancies, and the dominant electron carrier scattering mechanism is grain boundary scattering between the crystal and the amorphous grain. For ITO films deposited over 180 ℃, the carrier concentration are provided by tin doping, and the dominant scattering mechanism transforms from grain boundary scattering between the crystal grains to ionized impurity scattering with increasing deposition temperature.     

日盲区紫外光非视线传输模型

为建立一个更接近实际情况的紫外光非视线传输模型,用来处理复杂的大气条件和边界条件,建立了基于Monte Carlo方法的紫外光非视线传输快速算法模型。分析了发射功率为1 W的单色紫外光信号在不同环境条件下的脉冲响应函数和边界条件对信号强度空间分布的影响,以及系统发射仰角和接收仰角与探测信号强度的关系。与单次散射模型比较,该模型具有更高的精度和边界处理能力。对合理涉及通信系统、提高通信质量都有很大提高。