Multivariable controller design in an adaptive control scheme

A multivariable control system design approach in the frequency domain is presented. The issue of control system redesign in an adaptive control scheme is discussed. Expert system techniques have been used for the automated design of controllers for multivariable systems. Design knowledge has been represented using rules, facts and objects. The design process consists of a sequence of operations obtained by heuristics and experience in the the design techniques. An automated design session of a multivariable plant using the expert system demonstrates that the expert system appears to work well in its prototype implementation.     

Effect of Stress State on Growth of Interfacial Intermetallic Compounds Between Sn-Ag-Cu Solder and Cu Substrates Coated with Electroless Ni Immersion Au

Excessive intermetallic compound (IMC) growth in solder joints will significantly decrease the reliability of the joints. IMC growth is known to be influenced by numerous factors during the component fabrication process and in service. It is reported that, other than temperature and holding time, stress can also influence the IMC growth behavior. However, no existing method can be used to study the effect of stress state on IMC growth in a controlled manner. This paper presents a novel method to study the effect of stress on interfacial IMC growth between Sn-Ag-Cu solder and a Cu substrate coated with electroless Ni immersion Au (ENIG). A C-ring was used and in-plane bending induced tensile and compressive stresses were applied by tightening the C-ring. Results revealed that in-plane compressive stress led to faster IMC growth as compared with in-plane tensile stress.     

天然气:通向氢能时代的桥梁

文章概述了人类能源利用从柴薪、煤到石油、天然气的探索与转变历程,着重对天然气利用在解决城市燃料和空气污染、提高发电效率、推动分布式发电、生产合成氨和合成甲醇、推动燃料电池转向氢能经济时代等方面的优越性进行了阐述。     

BKX-Ⅰ型并联机床的谐响应分析

应用有限元分析软件(ANSYS),对BKXⅠ型并联机床进行谐响应分析,分别得到了机床各节点沿机床的虚拟轴X、Y和Z向的位移谐响应曲线。在此基础上,还分析了该机床的谐响应规律,并明确了谐响应的特点,为改善此类机床的动态特性提供了一定的参考依据。     

Microfabricated preconcentrator-focuser for a microscale gas chromatograph

The design, fabrication, and testing of a preconcentrator-focuser (PCF), consisting of a thick micromachined Si heater packed with a small quantity of a granular adsorbent material are described. The PCF is developed to capture and concentrate vapors for subsequent focused thermal desorption and analysis in a micro gas chromatograph. The microheater contains an array of high-aspect-ratio, etched-Si heating elements, 520 /spl mu/m (h)/spl times/50 /spl mu/m (w)/spl times/3000 /spl mu/m (l), bounded by an annulus of Si and thermally isolated from the remaining substrate by an air gap. This structure is sandwiched between Pyrex glass plates with inlet/outlet ports that accept capillary tubes for sample flow and is sealed by anodic bonding (bottom) and rapidly annealed glass/metal/Si solder bonding (top). The large microheater surface area allows for high adsorption capacity and efficient, uniform thermal desorption of vapors captured on the adsorbent within the structure. The adsorbent consists of roughly spherical granules, /spl sim/200 /spl mu/m in diameter, of a high-surface-area, graphitized carbon. Key design considerations, fabrication technologies, and results of performance tests are presented with an emphasis on the thermal desorption characteristics of several representative volatile organic compounds as a function of volumetric flow rates and heating rates. Preconcentration factors as high as 5600 and desorbed peak widths as narrow as 0.8 s are achieved from 0.25-L samples of benzene at modest heating rates. The effects of operating variables on sensitivity, chromatographic resolution, and detection limits are assessed. Testing of this PCF with a micromachined separation column and integrated sensor array is discussed briefly.     

工程机械和建材机械的盛大展会

德国慕尼黑国际博览集团是享誉全球的国际化大型博览公司,是世界上最重要的十大展览公司之一。自2002年始与上海新国际博览中心共同组织了两年一届的中国国际工程机械、建材机械、工程车辆及设备博览会(BAUMA CHINA)。2004年该博览会吸引了来自27个国家的738个参展商,展会场地达10万平方米,观众来自100个国家约5万多人(国外观众占21%)。鉴于中国使用工程机械、建材机械较多的交通运输业、建筑业、能源建设、水利水电建设等行业都保持了很高的发展速度,中国工程机械市场将是一个持续和不断成长的市场。2006年11月21—24日将在上海新国际…     

论黄河三角洲流路演变及河口治理的指导原则

通过分析黄河三角洲流路演变中溯源堆积及溯源冲刷对典河下游河道影响的范围，幅度和作用历时，提出在黄河泥沙从根本上减少之前，河口治理的指导原则应是在有利于工农业发展和有利于防洪防凌前提下，有计划地安排河口流路。     

氢化物原子荧光法直接测定地质样品中痕量硒和碲

研究了采用氢化物原子荧光法同时对硒、碲进行直接测定的条件，拟定了适合于一般地质样品中痕量硒和碲的分析方法。