在数字化校园背景下推进人事管理工作信息化

本文主要分析在数字化校园背景下,人事管理工作为什么要实现信息化以及人事管理系统建设的具体方案。     

需求分析与软件可靠性保证

通过对软件测试过程中产生的数据进行分析,对照软件设计过程中需求分析中的错误或缺陷,对有关可靠性指标进行反复度量,明确软件错误的分布以减少其对软件需求分析可靠性的影响,进而对相关的错误或缺陷进行控制。     

Novel application of nanocrystalline nickel electrodeposit: Making good diamond tools easily, efficiently and economically

Electrodeposition has been identified as a feasible and economical technique for nanomaterials application. This article details an improved approach to producing better diamond tools at lower cost and with higher productivity. Pulse-electroformed nanocrystalline nickel was used as the new matrix. The pulse parameters were determined after examination of the microstructure, grain size, hardness and tensile strength of the deposits obtained at different average current densities (J_m) with constant pulse-on time and pulse-off time. It is shown that, with J_m ranging from 1 Adm^− 2 to 14 Adm^− 2, the grain size decreases sharply from 180 nm to about 10 nm while the hardness and tensile strength significantly increase at first and then reach their peaks respectively, although the strength fails to stay long. Current density J_m that produced the highest hardness and strength of deposit (with grain size of 20 nm) was chosen for new diamond tools that exhibited 20.2% longer service life than their usual Ni-Co counterparts. Therefore, nanocrystalline electrodeposits are expected to be an upgrading substitute for conventional polycrystalline matrix.     

Efficient photodegradation of phenol assisted by persulfate under visible light irradiation via a nitrogen-doped titanium-carbon composite

To realize the utilization of visible light and improve the photocatalytic efficiency of organic pollutant degradation in wastewater, a nitrogen-doped titanium-carbon composite (N-TiO₂/AC) prepared by sol-gel methods was applied in the photodegradation of phenol assisted by persulfate under visible light irradiation (named N-TiO₂/AC/PS/VIS). The results show that a synergistic effect exists between visible-light photocatalysis and persulfate activation. Compared with TiO₂/PS/VIS, the phenol degradation rate was found to be observably improved by 65% in the N-TiO₂/AC/PS/VIS system. This significant increase in degradation rate was mainly attributed to the following two factors: 1) The N and C doping can change the crystal structure of TiO₂, which extends the TiO₂ absorption wavelength range to the visible light region. 2) As an electron acceptor, PS can not only prevent electrons and holes from recombining with each other but can also generate strong oxidizing radicals such as ∙SO₄^– and ∙OH to accelerate the reaction dynamics. The process of phenol degradation was found to be consistent with the Langmuir pseudo-first-order kinetic model with an apparent rate constant k of 1.73 min^–1. The N-TiO₂/AC/PS/VIS process was proven to be a facile method for pollutant degradation with high pH adaptability, excellent visible-light utilization and good application prospects.     

One-step fabrication superhydrophobic sand filter for capillary-driven separation of water-in-oil emulsions

The efficient separation of water-in-oil emulsion is of significance in environment and energy filed, and it has become a world-wide challenge. Herein, we have presented a one-step, facile and low-cost approach to prepare superhydrophobic sands for efficient separation of water-in-oil emulsion. The as-prepared sand layers possessed a water contact angle higher than 151°, demonstrating their superior superhydrophobic property. Besides, the as-prepared sand layers could separate water-in-emulsions with separation efficiency up to 99.7%, which is superior to both traditional and superwettable filtration membranes. The effect of thickness of sand layer on separation performance was also investigated. The results showed that the filtration flux decreased with the increased of filtration thickness while the separation efficiency increased. The as-prepared sand layer proposed by this study is a processing candidate for separating water-in-oil emulsion in practical industry. Additionally,the as-prepared superhydrophobic sand fabrication method also provides an alternative for desert water storage.     

Toward Largely Enhanced Toughness and Balanced Strength in PA1012/EPDM Blends via Synergistic Effect of Sacrificial Bonds and Network Structure

Here, zinc-neutralized ethylene propylene diene monomer (EPDM) ionomers with different neutralization levels are prepared through melt blending, and are then incorporated with polyamide 1012 (PA1012) to fabricate PA1012/EPDM ionomer blends. Interestingly, complex crosslinking networks are formed in the blends due to the construction of sacrificial bonds (Zn²⁺-carboxyl, Zn²⁺-amide). The as-formed network structure and sacrificial bond endow the PA/EPDM blends with largely enhanced toughness (16 times higher than that of neat PA), as well as balanced strength and stiffness. Meanwhile, the rheological behaviors of PA1012/EPDM ionomer blends indicate their relative low melting viscosity, which can avoid the processing shortcomings of plastics toughened with rubber. Moreover, PA1012/EPDM ionomer blends show obvious gelation behavior, and a maximum notched Izod impact strength exhibited at the gel point, in which unique double network structure can be observed obviously, indicating that there is a corresponding correlation between the rheological and mechanical parameters. Furthermore, the supper-toughening mechanism of PA1012/EPDM ionomer blends at gel point is explored, which origins from the large deformation and cavitation of rubber particles and the destruction of special double network morphologies. This study provides a novel and effective strategy to fabricate PA materials with outstanding toughness and excellent strength simultaneously.     

工艺因素对82B钢280 mm x325 mm铸坯凝固过程的影响

为模拟不同工艺条件下的连铸坯的凝固过程,采用有限元法模拟了82B钢连铸的凝固过程,获得280 mm×325 mm连铸坯的温度场。结果表明,随拉速从0.60 m/min增加到0.76 m/min,凝固时f_s=1处与f_s=0处皆后移,但中心凝固时间反而增加了9.8%。随过热度由15℃增加到50℃时,凝固末端f_s=1处同样后移,约后移1.1 m。根据模拟结果改进连铸工艺,当拉速从0.60 m/min增加到0.76m/min,增加轻压下工艺可改善低倍质量。     

TiCN基硬质合金刀具切削性能与切削机理研究

通过系统地切削试验，研究了TiCN基新型硬质合金刀具在耐磨性、抗冲击性、切削力、刀一屑摩擦系数、加工表面质量等方面的切削性能特点；并通过一定的理论分析，探讨了TiCN基硬质合金综合性能优越的切削机理。研究所得大量切削试验数据及回归经验公式等，可供TiCN基硬质合金刀具推广应用时参考。     

顶头形状对穿孔毛管壁厚均匀性及能耗影响的研究

针对目前穿孔顶头形状研究所存在的问题,在实验室内就提高一次穿孔毛管的壁厚均匀性及降低能耗进行了系统的试验研究,初步研制成功一种新型的平头对心顶头。     

Relating the molecular structure and crystallization behavior of polypropylene

The crystallization behavior of two polypropylene (PP) resins as used for biaxially oriented polypropylene (BOPP) and general injection mold applications, respectively, has been intensively investigated and compared by means of polarized light optical micrography (POM), differential scanning calorimetry (DSC), conventional transmission electron microscopy (TEM), and high resolution transmission electron microscopy (HRTEM). It is found that both molecular weight distribution and isotacticity of polypropylene strongly affect its crystallization characteristics, e.g., the number of crystal nuclei at the initial stage, crystallization dynamics, the morphology, size and perfection of crystals in the final product, and so on. The results indicate an appropriate molecular structure is vital in producing high‐quality BOPP film. Polym. Eng. Sci. 44:1749–1754, 2004. © 2004 Society of Plastics Engineers.