喷丸对连杆疲劳强度的影响

本文阐述了喷丸强化提高连杆表面质量和疲劳寿命。经喷丸处理,其试片弧高度迟到0.7mm时,疲劳极限提高了19%,达到440MPa,连杆实物疲劳强度试验结果表明,喷丸复盖率影响强化效果,文中还叙述了喷丸强化层应力分布的X射线应力测定工作。     

Dynamic Effects in Hopkinson Bar Four-Point Bend Fracture

Hopkinson bar techniques have played an important role in the study of high-rate deformation and fracture behavior of materials. In the current work, a split Hopkinson pressure bar was developed for dynamic four-point bend fracture testing, referred to as a “two-bar (incident and transmitted bars)/four-point” (2-bar/4-pt) bend test. To further understand some fundamental issues regarding stress wave propagation in this 2-bar/4-pt bend testing system, dynamic fracture tests were performed in pulse-shaped and unshaped pulse testing conditions. The effect of the pulse shaper on the incident pulse characteristics (rise time and duration), specimen’s dynamic response (load and loading point displacement), crack initiation time and stress-state equilibrium were investigated experimentally in the current work. The present results show that stress state equilibrium can be achieved prior to fracture initiation in notched and precracked specimens. In the pulse-shaped bending test, the specimen is more likely to attain stress-state equilibrium than in an unshaped incident pulse test. The crack initiation time was extended and the time required for attaining stress equilibrium was reduced by pulse shaping due to the tailored incident pulse having a longer rise time, which ensures that stress equilibrium is achieved prior to crack initiation. This article is based on a presentation made in the symposium entitled “Dynamic Behavior of Materials,” which occurred during the TMS Annual Meeting and Exhibition, February 25–March 1, 2007 in Orlando, Florida, under the auspices of The Minerals, Metals and Materials Society, TMS Structural Materials Division, and TMS/ASM Mechanical Behavior of Materials Committee.     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

Compressive and tribological properties of Al2O3 fibre and hexagonal BN particle hybrid reinforced Al-Si alloys

Al₂O₃ fibre-hexagonal BN particle hybrid reinforced aluminium-silicon alloys were fabricated by centrifugal force infiltration route. Hardness test and ultimate compressive test results are reported. The wear and friction properties of hybrid MMCs was investigated by means of a block-on-ring (bearing steel) type wear rig in a dry sliding condition. It is shown that the hardness and ultimate compressive strength of hybrid MMCs was evidently decreased with the addition of hexagonal BN particles, however, the wear rate and coefficient of friction of hybrid MMCs was improved simultaneously with increase of BN particle volume fraction, especially for the higher applied loads in the test.     

大力发展循环经济实现企业可持续发展

莱钢始建于1970年1月,现控股莱钢股份、鲁银投资两个上市公司及齐鲁证券等25个子公司。莱钢是中国冶金行业首批通过ISO9002质量管理体系、ISO14001环境管理体系和OHSAS18001职业安全健康管理体系国家认证的企业。2005年,莱钢被国家发改委确定为国家第一批循环经济试点单位。     

Selective Regional Correlation for Pattern Recognition

In this paper, a novel correlation-based pattern classifier that relies on the analysis of time-frequency decomposition of a template and signals is proposed. Significant improvements in resolution and accuracy are obtained using this new classifier when compared to a conventional correlation-based one. The short-time Fourier transform, continuous wavelet transform, and S-transform are considered in the time-frequency decomposition process. To evaluate the performance of the proposed scheme, numerical studies are performed on a set of synthetic test signals, and excellent results have been obtained. This paper also presents an illustrative example where two types of heart sounds are classified. The classification error percentage for the heart sounds using the new classifier is only 6.670% as compared to 56.67% when a general correlation-based classifier is used     

浅谈低温地面辐射采暖的利弊及隐患的避免

本文主要对低温地面辐射采暖的利弊及其隐患和隐患的避免加以分析、探讨。     

一幅画

从吃饱到吃好、吃精至吃的环境,人们对生活的要求逐渐趋向艺术化,餐馆老板会把环境设计与经营放在同等地位,所以好的餐饮空间层出不穷,也是社会发展的必然产物。位于宁波老外滩的瀚珍舫餐馆,建筑一层的面积较小,二、三层呈狭长形,做为餐馆这样的建筑条件并不理想,设计师把包厢和雅座设置在两边,这样走廊显得更幽深,柱子阵列得更有气势。拆除原先的楼梯,做了一部上下错位且不规则楼梯,曲折向上,增强了空间的层次。通顶的储酒柜,从三楼悬下的八米长吊灯,把一至三楼不落痕迹地融为一体。要设计一个好作品,设计师的构想需要不停地游走。碰撞的激情仿佛是一幅画,渐渐地,它的轮廓清晰了,色彩明朗了,它的主题神秘而遥不可及,每个人的心扉都有不同的暗香飘逸。掩映在现代手法中的精致、深沉从骨子里透出古典优雅     

桩土物理模型及结构—桩—土相互作用

本文将工程中常用的密集打桩土体模拟为正交各向异性弹性体。建立了刚性基础-桩-土这一空间相互作用系统的模型。根据圆柱体柱坐标的极点条件。分别选取了两组位移函数来表征桩基和土的位移,并用子区间法分析了结构-桩-土系统的相互作用地震反应。