注水站微机数据采集与控制系统

用工控机组成了油田注水站数据采集系统．给出了系统的组成及测量方法，并讨论了系统的可靠性等问题．     

喷丸对连杆疲劳强度的影响

本文阐述了喷丸强化提高连杆表面质量和疲劳寿命。经喷丸处理,其试片弧高度迟到0.7mm时,疲劳极限提高了19%,达到440MPa,连杆实物疲劳强度试验结果表明,喷丸复盖率影响强化效果,文中还叙述了喷丸强化层应力分布的X射线应力测定工作。     

Dynamic Effects in Hopkinson Bar Four-Point Bend Fracture

Hopkinson bar techniques have played an important role in the study of high-rate deformation and fracture behavior of materials. In the current work, a split Hopkinson pressure bar was developed for dynamic four-point bend fracture testing, referred to as a “two-bar (incident and transmitted bars)/four-point” (2-bar/4-pt) bend test. To further understand some fundamental issues regarding stress wave propagation in this 2-bar/4-pt bend testing system, dynamic fracture tests were performed in pulse-shaped and unshaped pulse testing conditions. The effect of the pulse shaper on the incident pulse characteristics (rise time and duration), specimen’s dynamic response (load and loading point displacement), crack initiation time and stress-state equilibrium were investigated experimentally in the current work. The present results show that stress state equilibrium can be achieved prior to fracture initiation in notched and precracked specimens. In the pulse-shaped bending test, the specimen is more likely to attain stress-state equilibrium than in an unshaped incident pulse test. The crack initiation time was extended and the time required for attaining stress equilibrium was reduced by pulse shaping due to the tailored incident pulse having a longer rise time, which ensures that stress equilibrium is achieved prior to crack initiation. This article is based on a presentation made in the symposium entitled “Dynamic Behavior of Materials,” which occurred during the TMS Annual Meeting and Exhibition, February 25–March 1, 2007 in Orlando, Florida, under the auspices of The Minerals, Metals and Materials Society, TMS Structural Materials Division, and TMS/ASM Mechanical Behavior of Materials Committee.     

澳大利亚进口焦煤煤质特性与结焦特性研究

通过质量检测、煤的岩相分析和20kg试验焦炉炼焦试验，对澳大利亚两种进口焦煤诺维茨煤和峰景煤的煤质和结焦特性进行了研究，两种进口焦煤低灰、低硫，为单一煤层煤，煤质稳定，配煤炼焦有利于焦炭质量稳定。峰景煤和国内柳湾煤的结焦性能相当，诺维茨煤的结焦性能与国内恒山煤和祁县煤的结焦性能接近。     

浸胶工艺对Nomex蜂窝性能的影响

本文研究了浸胶工艺对Ｎｏｍｅｘ蜂窝性能的影响，分析探讨了提高Ｎｏｍｅｘ蜂窝性能及外观质量的途径。研究结果表明：采取新的浸胶工艺制作的Ｎｏｍｅｘ蜂窝，各项性能全面达到法国宇航材料标准。     

大力发展循环经济实现企业可持续发展

莱钢始建于1970年1月,现控股莱钢股份、鲁银投资两个上市公司及齐鲁证券等25个子公司。莱钢是中国冶金行业首批通过ISO9002质量管理体系、ISO14001环境管理体系和OHSAS18001职业安全健康管理体系国家认证的企业。2005年,莱钢被国家发改委确定为国家第一批循环经济试点单位。     

Selective Regional Correlation for Pattern Recognition

In this paper, a novel correlation-based pattern classifier that relies on the analysis of time-frequency decomposition of a template and signals is proposed. Significant improvements in resolution and accuracy are obtained using this new classifier when compared to a conventional correlation-based one. The short-time Fourier transform, continuous wavelet transform, and S-transform are considered in the time-frequency decomposition process. To evaluate the performance of the proposed scheme, numerical studies are performed on a set of synthetic test signals, and excellent results have been obtained. This paper also presents an illustrative example where two types of heart sounds are classified. The classification error percentage for the heart sounds using the new classifier is only 6.670% as compared to 56.67% when a general correlation-based classifier is used     

浅谈低温地面辐射采暖的利弊及隐患的避免

本文主要对低温地面辐射采暖的利弊及其隐患和隐患的避免加以分析、探讨。