新型单槽磷酸反应器（RTCB）的开发研究

本文旨在开发一种新型磷酸反应器──具有类似太极图曲线形隔板的单槽双区四桨反应器（ＲＴＣＢ反应器）。首先以自来水和磷石膏为搅拌介质进行冷模实验，冷模实验结果表明，ＲＴＣＢ反应器具有功耗低、悬浮、混合效果好、停留时间分布合理等优点。然后，采用同样的二水物流程工艺条件，选取道尔槽作参照物进行热模实验，热模实验结果表明，相同条件下与道尔槽相比，ＲＴＣＢ槽具有省功、磷石膏结晶环境优越、磷石膏洗涤率稍高等优点，但磷矿萃取率稍低，可望用于湿法磷酸的工业化生产。本文的研究工作将为该反应器的进一步开发应用提供依据。     

卧式下肢康复机器人主动柔顺控制实验研究

为保证下肢运动功能障碍患者在康复训练中的安全性和舒适性,利用力反馈信息采用阻抗控制原理设计了康复机器人系统的控制器,通过调整末端位置与力之间的关系使机器人具有一定的柔顺性.建立了系统的控制模型,并在dSPACE平台上进行了实验研究.结果表明,通过调节控制器中的阻抗参数,可以使机器人获得不同的刚度特性和阻尼特性,同时分析...     

Multifunctional picoliter droplet manipulation platform and its application in single cell analysis

We developed an automated and multifunctional microfluidic platform based on DropLab to perform flexible generation and complex manipulations of picoliter-scale droplets. Multiple manipulations including precise droplet generation, sequential reagent merging, and multistep solid-phase extraction for picoliter-scale droplets could be achieved in the present platform. The system precision in generating picoliter-scale droplets was significantly improved by minimizing the thermo-induced fluctuation of flow rate. A novel droplet fusion technique based on the difference of droplet interfacial tensions was developed without the need of special microchannel networks or external devices. It enabled sequential addition of reagents to droplets on demand for multistep reactions. We also developed an effective picoliter-scale droplet splitting technique with magnetic actuation. The difficulty in phase separation of magnetic beads from picoliter-scale droplets due to the high interfacial tension was overcome using ferromagnetic particles to carry the magnetic beads to pass through the phase interface. With this technique, multistep solid-phase extraction was achieved among picoliter-scale droplets. The present platform had the ability to perform complex multistep manipulations to picoliter-scale droplets, which is particularly required for single cell analysis. Its utility and potentials in single cell analysis were preliminarily demonstrated in achieving high-efficiency single-cell encapsulation, enzyme activity assay at the single cell level, and especially, single cell DNA purification based on solid-phase extraction.     

Enhancement of gas sensing properties of CdS nanowire/ZnO nanosphere composite materials at room temperature by visible-light activation

CdS nanowire/ZnO nanosphere materials (CdS/ZnO) with hierarchical structure were synthesized by a three-step solvothermal process. XRD, FESEM and TEM analysis confirmed the growth of ZnO nanospheres on the surface of CdS nanowires (NWs). The transient photovoltage (TPV) measurements revealed that the interface between CdS and ZnO can inhibit the recombination of photogenerated excess carriers and prolong the lifetime of excess carriers in CdS/ZnO materials. Moreover, the CdS/ZnO materials exhibit a dramatic improvement in optoelectronic performance and visible-light-irradiation gas sensing activity, which gave 1 order of magnitude larger than that of CdS NWs in response to formaldehyde. The enhancement of sensing properties is attributed to the interfacial transport of excess carriers.     

Amazing ageing property and in situ comparative study of field emission from tungsten oxide nanowires

In this work, needle-shaping of tungsten oxide nanowires occurred during field emission characterization. Compared with nanowires with a flat apex, needle-shaped emitters showed a lower threshold field of 11.9 V μm(-1) for 1 mA cm(-2) and a higher emission current of 1120 μA at 16.2 V μm(-1). Most notably, the measured ageing current dramatically increased by more than four times until it slightly decreased, tending towards stability. In addition, the samples showed striking difference in their nonlinear Fowler-Nordheim plot before and after ageing tests. Selected area diffraction and transmission electron microscope characterizations were used to further study these amazing results.     

Notch stress concepts for the fatigue assessment of welded joints - Background and applications

Among modern fatigue design concepts for welded structures, the linear-elastic notch stress concept gains increasing industrial acceptance. There are two variants of this concept, one for thick walled (t ? 5 mm) welded joints with the reference radius r_ref = 1.00 mm, which is already included in the fatigue design recommendations of the IIW and applied for the assessment of big welded structures, and one for thin walled (t < 5 mm) welded joints with the reference radius r_ref = 0.05 mm, which is more and more used in the automotive industry.The concept with r_ref = 1.00 mm is based on the micro-support theory of Neuber with the fictitious radius r_ref = 1.00 mm, derived by Radaj. The background of the concept with r_ref = 0.05 mm is the relationship between the stress-intensity factor and the notch stress according to Creager and Paris as well as Irvin’s theory of crack blunting. Besides these two theories, the definition of both of these radii has also an experimental background; they are observed in many welded joints.In the present paper, first the background and then different applications of both concept variants are described: the application of the reference radius of r_ref = 1.00 mm for MAG-welded offshore K-nodes (t = 30 mm) and sandwich panels for ship decks (t = 5 mm), and the application of r_ref = 0.05 mm for spot-welded automotive doors (t = 1 mm) and MAG-welded automotive trailing links (t = 3-4 mm). The sandwich panels were evaluated additionally with r_ref = 0.05 mm. Calculations and experimental results are compared and the reliability of the notch stress concept variants underlined. Additionally, recommendations for the slope of design lines distinguishing between thin and thick dimensions are given, i.e. k = 3.0 and 5.0 (normal stress, shear stress) for thick and stiff structures, k = 5.0 and 7.0 for thin and flexible structures.     

VLS growth of alternating InAsP/InP heterostructure nanowires for multiple-quantum-dot structures

We investigated the Au-assisted growth of alternating InAsP/InP heterostructures in wurtzite InP nanowires on InP(111)B substrates for constructing multiple-quantum-dot structures. Vertical InP nanowires without stacking faults were obtained at a high PH(3)/TMIn mole flow ratio of 300-1000. We found that the growth rate changed largely when approximately 40 min passed. Ten InAsP layers were inserted in the InP nanowire, and it was found that both the InP growth rate and the background As level increased after the As supply. We also grew the same structure using TBAs/TBP and could reduce the As level in the InP segments. A simulation using a finite-difference time-domain method suggests that the nanowire growth was dominated by the diffusion of the reaction species with long residence time on the surface. For TBAs/TBP, when the source gases were changed, the formed surface species showed a short diffusion length so as to reduce the As background after the InAsP growth.     

CAE技术在截止阀设计中的应用探讨

运用CAE技术对空调用截止阀的各项性能进行模拟,获得结构应力状态。从分析结果可知：截止阀在各性能试验工况中最大应力都不高,不存在强度不足的风险;而在装配过程中螺母拧紧时,截止阀的应力水平较高,可能存在强度不足的风险;增大过渡区域的圆角半径可以改善结构的变形,降低最大应力值。     

Synergistic effect of 2-oleyl-1-oleylamidoethyl imidazoline ammonium methylsulfate and halide ions on the inhibition of mild steel in HCl

The effect of 2-oleyl-1-oleylamidoethyl imidazoline ammonium methylsulfate (ODD) and halide ions on corrosion inhibition of mild steel in HCl solution has been studied by experimental and molecular dynamics simulation methods. Synergistic effects were observed between ODD and the halides, and the inhibition efficiency was found to follow the trend ODD–Cl⁻ < ODD–Br⁻ < ODD–I⁻. In molecular dynamics simulation, the analysis of fractional free volume and diffusion coefficient showed that the synergistic effect increased in the order ODD–Cl⁻ < ODD–Br⁻ < ODD–I⁻. The molecular dynamics simulation analysis agreed with the experimental results.