注聚采出水分离用动态水力旋流器特性研究

原有的地面工艺和设备已不能满足聚合物驱采出水分离的要求。采用自行研制的动态水力旋流器，在增压与不增压两种工艺流程下，分别进行了流量和转数对分离效率的影响、转数与压力降的关系，以及入口压力与处理量的关系等项试验研究。试验结果表明，与静态水力旋流器相比，动态水力旋流器的分离效率明显提高，一般可提高10％左右；压力损失显著降低，约可减少0．1MPa，足见可在低压下工作，易于实现无泵运行；无泵运行明显比有泵增压运行的分离效率高，但处理量会有所降低。将动态水力旋流器应用于聚合物驱产出水的油－水分离处理是完全可行的。     

基于Native Mode ATM API的应用系统模型及关键技术

ＡＴＭ技术作为Ｂ－ＩＳＤ的基础，在传输包括话音、图像、数据的综合业务环境中具有现有其它网络技术所不具备的技术优势，然而目前真正基于ＡＴＭＮａｔｉｖｅＭｏｄｅ的应用还很少，而大量基于Ｏｖｅｒｌａｙ Ｍｏｄｅ的ＡＴＭ应用不能充分发挥ＡＴＭ技术的优势。随着信息技术的发展，将会有大量的综合业务应用出现，它具有和传统数据通信安全不同的业务特性，必须通过一种灵活，高效的应用程序接口给予支持，本文提出基于Ｎａｔ     

Detection of congenital müllerian duct anomalies using three-dimensional ultrasound

PURPOSE: The purpose of this study was to assess the value of 3-dimensional sonography in the diagnosis of congenital müllerian duct anomalies, which cause infertility, preterm labor, and first trimester abortion. METHODS: A prospective study was undertaken in which 40 patients with histories of repeated spontaneous abortions or infertility were first examined using conventional 2-dimensional sonography or hysterosalpingography. Three-dimensional transvaginal sonography was then performed. RESULTS: Twenty-eight women had müllerian duct abnormalities, and 12 women had normal uterine anatomy. Müllerian duct defects detected in this study were unicornuate uterus (3), bicornuate uterus (3), complete or partial septate uterus (12), arcuate uterus (9), and didelphic uterus (1). The diagnosis of müllerian duct anomalies in these patients was confirmed by laparoscopic and/or hysteroscopic examinations. Three-dimensional sonography demonstrated all congenital uterine abnormalities with a sensitivity and specificity of 100%. Separate uterus and bicornuate uterus could be correctly diagnosed using 3-dimensional sonography in 11 (92%) of 12 cases and 3 (100%) of 3 cases, respectively. These 2 abnormalities were commonly confused with each other using hysterosalpingography and conventional sonography. CONCLUSIONS: Three-dimensional sonography with image reconstruction is less expensive and less invasive than hysterosalpingography for the assessment of uterine anatomy and diagnosis of müllerian duct abnormalities. The ability to visualize both the uterine cavity and the myometrium on a 3-dimensional scan facilitates the diagnosis of uterine anomalies and enables the differentiation of septate from bicornuate uteri for preoperative surgical planning.     

基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

简易炉外处理在电炉钢生产中的应用

阐述了小电炉采用投资少，见较快，简单易行的炉外处理措施，提高了钢质量和生产率，生产实践和应用结果表明，本措施可为同类型企业的炼钢工艺完善和技术进步提供参考。     

Towards a generalized TLM algorithm for solving arbitraryreciprocal and nonreciprocal planar structures

A generalized transmission line matrix (TLM) algorithm is developed in the frequency domain to tackle arbitrary both reciprocal and nonreciprocal anisotropic waveguiding problems. In particular, the modeling issue for arbitrary planar structures is stressed in this work. A new three-dimensional (3-D) condensed node is used to consider the effect of both electric and magnetic constitutive tensors. Various results indicate how the modal dispersive behavior can be manipulated by changing not only the anisotropic characteristics of the substrate, but also the strip/slot geometry as well as the magnitude and orientation of the applied static magnetic field. The present algorithm is useful for CAD and simulation of a large class of gyrotropic waveguide-based microwave and millimeter-wave circuits     

牙鲆淋巴囊肿病的PCR诊断方法研究

以中国养殖牙鲆 (Paralichthysolivaceus)淋巴囊肿病毒 (Lymphocystisdiseasevirus,LCDVcn)主要衣壳蛋白 (majorcapsidprotein ,MCP)基因的中间保守序列为目标基因 ,设计了一对特异性引物。该引物可扩增出 172bp的病毒DNA片段 ,其最小DNA检出量为 0 0 183ng。用PCR法从人工感染淋巴囊肿病毒 3天的牙鲆血、鳃、肝、脾、肠、胃及自然发病牙鲆的肿瘤中 ,分别检测到了LCDV的存在。本实验结果证明 ,PCR法对于早期检测LCDV是十分有效的。     

跟踪系统中跟踪器延迟的自适应预测补偿方法

跟踪系统中跟踪器的延迟会对系统的稳定性和跟踪精度产生不利影响。为此以典型Ⅱ型系统为例，理论上定理地分析了跟踪器延迟对跟踪系统的影响，并提出了将采用LMS算法和横向滤波器结构的自适应滤波器用于延迟预测补偿的方法。仿真结果验证了方法的有效性。