Atmospheric and low pressure shadow masked MOVPE growth of InGaAs(P)/InP and (In)GaAs/(Al)GaAs heterostructures and quantum wells

The shadow masked growth technique is presented as a tool to achieve thickness and bandgap variations laterally over the substrate during metalorganic vapor phase epitaxy. Lateral thickness and bandgap variations are very important for the fabrication of photonic integrated circuits, where several passive and active optical components need to be integrated on the same substrate. Several aspects of the shadow masked growth are characterized for InP based materials as well as for GaAs based materials. Thickness reductions are studied as a function of the mask dimensions, the reactor pressure, the orientation of the masked channels and the undercutting of the mask. The thickness reduction is strongly influenced by the mask dimensions and the reactor pressure, while the influence of the orientation of the channels and the amount of undercutting is only significant for narrow mask windows. During shadow masked growth, there are not only thickness variations but also compositional variations. Therefore, we studied the changes in In/Ga and As/P ratios for InGaAs and InGaAsP layers. It appears that mainly the In/Ga-ratio is responsible for compositional changes and that the As/P-ratio remains unchanged during shadow masked growth.     

对我国酱油酿造几项新技术应用之浅见

本文概述了三十年来我国酿造酱油工业开展研究的六项新技术在现阶段的投产可行性，及进一步研究方向的看法。     

A Method of Combined SHPB Technique and BP Neural Network to Study Impact Response of Materials

Abstract:  A new method combining the split Hopkinson pressure bar (SHPB) technique with the back-propagation (BP) neural network program is proposed. By this method, the treated strain wave signals become smooth with less noises induced by the transverse inertia. Moreover, the dynamic rate-dependent constitutive behaviour of materials can be identified, without any pre-assumption of a constitutive model. It is found that by taking the experimentally measured data of strain, strain rate and time as 'input' and the corresponding data of stress as 'output' of the BP neural network, the dynamic constitutive behaviour with internal damage or phase transformation evolution is easy to be identified, where the time could represent either the internal damage evolution or phase transformation process accompanied with the deformation process. It is emphasised that the data learnt by the BP neural network must include both loading and unloading processes, if the whole loading and unloading response is to be correctly predicted. The comparisons between the predictions and experimental results are in good agreement for both polyamide (PA) polymer (as an example of nonlinear viscoelastic materials) and Ti–Ni alloy (as an example of superelastic materials with stress-induced phase transformation).     

Side-Track Erasure Processes in Perpendicular Recording

In perpendicular recording, substantial erasure of the stored data patterns can occur during the writing process. Among all those erasure processes, side-track erasure (STE) is one of the critical issues in drive head/media integration. Unlike the adjacent track erasure (ATE) process, the locations of the STE affected areas are often many tens of tracks away from the central writing track location. In this work, we report on an experimental investigation and quantification of the general attributes and the origins of the STE processes in various situations. Particularly, we thoroughly characterize some distinctive signatures and behaviors of STE processes by employing both the amplitude- and bit-error-rate-based STE measurement methods in combination with a novel magnetic force microscope characterization technique     

A force modulation study on crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films

This paper introduces the Force Modulation technique to the study of crystallization process in ferroelectric vinylidene fluoride and trifluoroethylene copolymer films. Using this technique we have successfully visualized ferroelectric crystalline domains and observed that these ferroelectric domains grow out from amorphous phase, unite into strip-like structures, and finally congregate into a union. Force Modulation can weaken the influence of topography on imaging of ferroelectric domains, and reveal more details, which are difficult to be observed in topographical image.     

Promising alloys for intermediate-temperature solid oxide fuel cell interconnect application

The formation of a low Cr-volatility and electrically conductive oxide outer layer atop an inner chromia layer via thermal oxidation is highly desirable for preventing chromium evaporation from solid oxide fuel cell (SOFC) metallic interconnects at the SOFC operation temperatures. In this paper, a number of ferritic Fe–22Cr alloys with different levels of Mn and Ti as well as a Ni-based alloy Haynes 242 were cyclically oxidized in air at 800 °C for twenty 100-h cycles. No oxide scale spallation was observed during thermal cycling for any of these alloys. A mixed Mn₂O₃/TiO₂ surface layer and/or a (Mn, Cr)₃O₄ spinel outer layer atop a Cr₂O₃ inner layer was formed for the Fe–22Cr series alloys, while an NiO outer layer with a Cr₂O₃ inner layer was developed for Haynes 242 after cyclic oxidation. For the Fe–22Cr series alloys, the effects of Mn and Ti contents as well as alloy purity on the oxidation resistance and scale area specific resistance were evaluated. The performance of the ferritic alloys was compared with that of Haynes 242. The mismatch in thermal expansion coefficient between the different layers in the oxide scale was identified as a potential concern for these otherwise promising alloys.     

Microwave heating synthesis of HgS and PbS nanocrystals in ethanol solvent

A novel route was developed to prepare PbS and HgS nanocrystals in ethanol solvent in the presence of sodium hydroxide by microwave heating method. PbS and HgS nanocrystals were obtained with an average size of approximately 10 and 6 nm, respectively. In the reaction, mercury acetate and lead acetate were used as mercury and lead source; sulfur powder was employed as chalcogenide source. The products were characterized by X-ray powder analysis (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV–Vis absorption spectroscopy. The probable mechanism was presented.     

IMAGE仪器MRX站A/D板电路分析及故障排除

通过对IMAGE仪器MRX站A／D板的电路分析，利用综合测试和分析诊断程序，并借助示波器和万用表，针对不同的故障，找出A／D板产生故障的根源，切实有效地排除故障。     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

高强度钢的Zn—Ti合金新镀层

本文研究了一种Ｚｎ－Ｔｉ合金新镀层，经盐水浸泡、中性盐雾和大气暴露试验结果试验，其耐蚀明显超过镀Ｚｎ层，并与镀Ｃｄ层相近，用缺口持久拉伸试验检验氢脆性，拉伸持续时间超过２００ｈ，达到原航空部部颁标准（ＨＢ５０６７－８５），该镀层适用于高强度钢防护。