The effects of substrate bias,substrate temperature,and pulse frequency on the microstructures of chromium nitride coatings deposited by pulsed direct current reactive magnetron sputtering

Recently, great attention has been devoted to the pulsed direct current (DC) reactive magnetron sputtering technique, due to its ability to reduce arcing and target poisoning, and its capability of producing insulating thin films. In this study, chromium nitride (CrN) coatings were deposited by the bipolar symmetric pulsed DC magnetron reactive sputtering process at different pulse frequency, substrate bias voltage, and the substrate temperature. It was observed that the texture of CrN changed from (111) to (200) as substrate temperature increased to 300°C as deposited at 2 kHz without substrate bias. With increasing pulsing bias and pulse frequency of target, predominated (200) orientation of CrN film was shown due to the ion bombardment/channeling effect to preferentially sputter those unaligned planes. For the CrN coatings deposited with pulsed biasing, the grain size decreased with increasing pulse frequency and substrate bias, whereas the surface roughness showed a reverse trend. The deposition rate of the CrN films decreased with increasing pulse frequency. It was concluded that the pulse frequency, substrate bias, and substrate temperature played important role in the texture, microstructure, and surface roughness of the CrN coatings deposited by the pulsed DC magnetron sputtering process.     

P型硅纳米板压阻特性的理论研究

考虑量子尺寸效应与自旋轨道耦合作用,从含有应变的6×6 Luttinger-Kohn哈密顿量出发,采用有限差分方法建立了p型硅纳米板的能带结构模型.基于硅纳米板压阻特性与其能带结构的相关性,采用改进的压阻理论定量分析了厚度、杂质浓度与温度对其压阻系数的影响.研究结果表明:量子尺寸效应强烈改变了硅纳米板的能带结构,是其压阻系数增大的主要因素,而自旋轨道耦合作用仅对含较高应变的硅纳米板的能带结构有较大影响;硅纳米板的压阻系数具有尺寸效应,随厚度减小而增大,随杂质浓度增加或温度升高而减小.在高简并条件下,硅纳米板的压阻系数与温度无关,完全由杂质浓度的大小控制;在非简并条件下,情况刚好相反.最后,利用施加应力前后空穴等能面形状的变化定性分析了硅纳米板压阻特性的起源.     

Tunable Parametric All-Fiber Short-Wavelength IR Transmitter

In this paper, the performance of an all-fiber short-wave IR (SWIR) transmitter with wideband tunability and high peak power is reported. Transmitter construction relied on parametric process in highly nonlinear fiber to convert a seed laser at 1260 nm to 2155 nm SWIR channel with record 39 dB efficiency and translation over 900 nm spectral range. We demonstrated 61 W of peak converted power at 2 $mu$m and 26 W at 2.15 $mu$ m. Efficient conversion was made possible by engineered fourth-order dispersion of the highly nonlinear fiber and construction of a low-noise pump source in a 1550 nm band.      

Reduced-rank multistage receivers for DS-CDMA in frequency-selective fading channels

Multistage (MS) implementation of the minimum mean-square error (MMSE), minimum output energy (MOE), best linear unbiased estimation (BLUE), and maximum-likelihood (ML) filter banks (FBs) is developed based on the concept of the MS Wiener filtering (MSWF) introduced by Goldstein et al. These FBs are shown to share a common MS structure for interference suppression, modulo a distinctive scaling matrix at each filter's output. Based on this finding, a framework is proposed for joint channel estimation and multiuser detection (MUD) in frequency-selective fading channels. Adaptive reduced-rank equal gain combining (EGC) schemes for this family of FBs (MMSE, MOE, BLUE, and ML) are proposed for noncoherent blind MUD of direct-sequence code-division multiple-access systems, and contrasted with the maximal ratio combining counterparts that are also formed with the proposed common structure under the assumption of known channel-state information. The bit-error rate, steady-state output signal-to-interference plus noise ratio (SINR), and convergence of the output SINRs are investigated via computer simulation. Simulation results indicate that the output SINRs attain full-rank performance with much lower rank for a highly loaded system, and that the adaptive reduced-rank EGC BLUE/ML FBs outperform the EGC MMSE/MOE FBs, due to the unbiased nature of the implicit BLUE channel estimators employed in the EGC BLUE/ML schemes.     

低密度奇偶校验码及其应用研究

阐述了低密度奇偶校验码的发展、定义、编译码方法。通过对LDPC码和Turbo码的比较和分析,得出LDPC码的整体性能要优于Turbo码。文中还讨论了LDPC码的应用,主要是在STC-OFDM系统中的应用。最后,对低密度奇偶校验码的未来的研究方向进行了展望。     

Compact Harmonic Filter Design and Fabrication Using IPD Technology

An integrated passive device (IPD) technology has been developed to meet the ever increasing needs of size and cost reduction in radio front-end transceiver module applications. Electromagnetic (EM) simulation was used extensively in the design of the process technology and the optimization of inductor and harmonic filter designs and layouts. Parameters such as inductor shape, inner diameter, metal thickness, metal width, and substrate thickness have been optimized to provide inductors with high quality factors. The technology includes 1) a thick plated gold metal process to reduce resistive loss; 2) MIM capacitors using PECVD SiN dielectric layer; 3) airbridges for inductor underpass and capacitor pick-up; and 4) a 10 mil finished GaAs substrate to improve inductor quality factor. Both lumped element circuit simulations and electromagnetic (EM) simulations have been used in the harmonic filter circuit designs for high accuracy and fast design cycle time. This paper will present the EM simulation calibration and demonstrate the importance of using EM simulation in the filter design in order to achieve first-time success in wafer fabrication. The fabricated IPD devices have insertion loss of 0.5 dB and harmonic rejections of 30dB with die size of 1.42 mm for high band (1710 MHz-1910 MHz) and 1.89 mm for low band (824-915 MHz) harmonic filters.     

An ARMA-type section model for average ten-day streamflow synthesis

Most of the rivers in Taiwan are short and run on a steep slope due to the island's topography. Because of the weak correlations of streamflow in time and the occurrence of extreme events such as typhoons, classical autoregressive-moving average (ARMA) models have difficulties in forecasting and synthesizing the average 10-day streamflow in Taiwan. In this study, the synthesis of the average 10-day streamflow of the Tanshui River in Taiwan is accomplished by a section model. The model divides the year-round streamflow records into several sections according to their distinguishable patterns, and each section is modeled by a separate ARMA model. For parameter control, a heuristic grouping procedure, based on statistical inference of the random noise part, is used to separate a year into a minimum number of sections. The section separation procedure follows the general precipitation pattern in a year. The case study results indicate high statistical agreement between synthesized series and historical records. Additionally, a new procedure, extended autocorrelation function (EACF), is introduced and applied in this study to assist in model identification.     

Defect Engineering in Ambipolar Layered Materials for Mode-Regulable Nociceptor

Defect engineering represents a significant approach for atomically thick 2D semiconductor material development to explore the unique material properties and functions. Doping-induced conversion of conductive polarity is particularly beneficial for optimizing the integration of layered electronics. Here, controllable doping behavior in palladium diselenide (PdSe₂) transistor is demonstrated by manipulating its adatom-vacancy groups. The underlying mechanisms, which originate from reversible adsorption/desorption of oxygen clusters near selenide vacancy defects, are investigated systematically via their dynamic charge transfer characteristics and scanning tunneling microscope analysis. The modulated doping effect allows the PdSe₂ transistor to emulate the essential characteristics of photo nociceptor on a device level, including firing signal threshold and sensitization. Interestingly, electrostatic gating, acting as a neuromodulator, can regulate the adaptive modes in nociceptor to improve its adaptability and perceptibility to handle different danger levels. An integrated artificial nociceptor array is also designed to execute unique image processing functions, which suggests a new perspective for extension of the promise of defect engineered 2D electronics in simplified sensory systems toward use in advanced humanoid robots and artificial visual sensors.     

Noise reduction of VQ encoded images through anti-gray coding

Noise reduction of VQ encoded images is achieved through the proposed anti-gray coding (AGC) and noise detection and correction scheme. In AGC, binary indices are assigned to the codevector in such a way that the 1-b neighbors of a code vector are as far apart as possible. To detect the channel errors, we first classify an image into uniform and edge regions. Then we propose a mask to detect the channel errors based on the image classification (uniform or edge region) and the characteristics of AGC. We also mathematically derive a criterion for error detection based on the image classification. Once error indices are detected, the recovered indices can be easily chosen from a “candidate set” by minimizing the gray-level transition across the block boundaries in a VQ encoded image. Simulation results show that the proposed technique provides detection results with smaller than 0.1% probability of error and more than 86.3% probability of detection at a random bit error rate of 0.1%, while the undetected errors are invisible. In addition, the proposed detection and correction techniques improve the image quality (compared with that encoded by AGC) by 3.9 dB     

Efficient and fast iterative reweighted least-squares nonrecursivefilters

An efficient and fast technique for designing L_p approximation filters using the iterative reweighted least-squares (IRLS) algorithm is proposed. This technique introduces an extra frequency response which implicitly includes the weighting function such that the filter coefficients can be obtained with O(N²) complexity