In-situ studies of electron field emission of single carbon nanotubes inside the TEM

Electron field emission characteristics of individual multi-walled carbon nanotubes (MWCNTs) were investigated in situ inside the transmission electron microscope (TEM). For a single MWCNT it was found that while field-emission can hardly occur from the side of the nanotube, a curved nanotube may result in finite side emission and the best emission geometry is the top emission geometry. Current-voltage (I-V) measurements made at different vacuum conditions and voltage sweeps emphasize the importance of the adsorbates on the electron field emission of MWCNTs. For a contaminated MWCNT, although the field emission current was reduced, the stability of its emission was improved. A current of up to several tens of μA was observed for a single MWCNT, but it was found that long time emission usually results in drastic structure damage that may lead to sudden emission failure.     

电沉积触媒的制备及其合成金刚石的研究

用电沉积的方法以Ni70Mn25Co5为基材制备了合成金刚石的触媒，选择适当的合成条件，在国产六面顶压机上用此电沉积触媒合成出颜色和晶型都较好的金刚石，为纯铁片做为基材制备电沉积触媒，降低合成金刚石触媒生产成本奠定了一定基础。     

Advances in Manufacturing Boron Carbide-Aluminum Composites

An infiltration method for preparing a boron carbide-aluminum (B₄C-AI) composite was modified so as to reduce the processing temperature and time. Titanium metal and titanium-based compounds were added to B₄C powders to enhance the wettability of the liquid aluminum on boron carbide skeletons. As expected, the time required for infiltration was significantly reduced on using the additives. Of these additives titanium metal was the most effective in facilitating aluminum infiltration. Another method, involving the heat treatment of boron carbide compacts at 1300°3C for 1 h before infiltration, was attempted, and a significant improvement was gained. These findings show that the treatment modified the surface condition of boron carbide powders via the removal of oxides. An additional attempt was made to increase the boron carbide content of the system by using a bimodal powder mixture. A maximum green density of 78% was achieved by mixing fine particle size and coarse particle size powders. The infiltrated boron carbide composites prepared using a bimodal powder with a preinfiltration heat treatment of the compacts exhibited promising mechanical properties, such as a Vickers hardness ( H _V) of 11 Gpa and an indentation toughness ( K _IC) in the range of 5–7.5 MPa·m^1/2.     

纳米尺寸硫化镍化学增感剂

本文发现了硫化镍纳米粒子对卤化银乳剂的化学增感作用，采用水不溶性的硫化镍纳米粒子作为化学增感剂，与水溶性的硫代硫酸钠增感剂相比，可以在乳剂灰雾增加不大的条件下明显提高乳剂的感光度和反差。     

Decane reforming reaction over Pt,Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite

Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on NaY- and HY-zeolite were examined as a catalyst for producing gasoline from n-decane via simultaneous reforming and cracking. The catalysts were prepared by calcining and reducing metal-ion-exchanged Y-zeolite with O₂ and H₂ at 300°C., respectively. Thus prepared catalysts were characterized by hydrogen chemisorption and temperature programmed desorption of ammonia. Pt-Ni/NaY and Pt-Ir/NaY bimetallic catalysts offered the improved activity maintenance compared to Pt/NaY monometallic catalyst. The catalysts supported on HY-zeolite showed higher selectivity toward C₅–C₇ and skeletal isomers of C₅–C₇- and C₈–C₁₀ than those of the catalysts supported on NaY-zeolite, which is a desired characteristic for increasing octane value of gasoline these days. However, deactivation with reaction time was much more pronounced on HY-zeolite-supported catalyst. When the catalyst was prcsulfided with H,S, the stability with time on stream was enhanced and the selectivity was quite different from that of the catalyst before presulfiding. The acidity of Y-zeolite and presulfiding of catalyst greatly influenced the activny, selectivity and stability of Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite in n-decane reforming reaction.     

Effect of temperature on polymer migration II: Concentration equation

Polymer migration is a generally well-known phenomenon in a flow field, and it has been verified that the sources of such phenomena are nonhomogeneity of the flow, concentration effects and hydrodynamic interactions between the polymer molecules. In addition, temperature effects were found to be another source of polymer migration. The Langevin equation for a polymer molecule was first derived from single chain dynamics using a kinetic theory for the bead-spring elastic harmonic dumbbell model, as described in part I (reference [1]). In this paper the diffusion equation and concentration profile of the polymer molecules induced by a temperature gradient are obtained from the Fokker-Planck equation. A new differential operator is also introduced to calculate the concentration profile. From the concentration equation obtained in the general flow geometry, we find that in dilute polymer solution there are significant effects on the polymer migration not only due to the nonhomogeneity of the flow field but also due to temperature gradients.     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Synthesis and properties of new polymerized monomer reactants matrix resins of pyrrolone–benzimidazole copolymers containing pyridine unit

A series of new polymerized monomer reactants (PMR) matrix resins of poly(pyrrolone‐benzimidazole)s containing a pyridine unit (PPBP) were synthesized by polycondensation of monoethyl ester of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic acid, 2,6‐diphenyl ester pyridinedicarboxylic acid or 3,5‐diphenyl ester pyridinedicarboxylic acid, and diethyl ester of 4,4′‐oxydiphthalic acid with 3,3′‐diaminobenzidine in a mixing solution of anhydrous ethyl alcohol and N‐methylpyrrolidone under given temperature and pressure conditions. The resulting resin solutions showed good solubility in polar organic solvents and stability at room temperature. The corresponding PPBP matrix resin, molded powder, and molded plate were prepared by undergoing amidation, imidization, cyclization, and crosslinking reactions when the reaction temperature was increased from 80 to 350°C, successively; the crosslinking structure was formed by the reverse Diels–Alder reaction at 270–290°C under 50 MPa pressure (2.5–3.5 MPa displayed by the pressure meter). The chemical reactions and properties of the resulting PPBP were studied by means of FTIR, TGA, and DMA methods, and the results indicated that the kinds of PPBP materials retain excellent thermal stability and processability; when the initial decomposition temperature was above 620°C the T_g was at 413.5°C for 3,5‐PPBP‐20 molded plate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3981–3990, 2004     

Efficient clustering of uncertain data streams

Clustering uncertain data streams has recently become one of the most challenging tasks in data management because of the strict space and time requirements of processing tuples arriving at high speed and the difficulty that arises from handling uncertain data. The prior work on clustering data streams focuses on devising complicated synopsis data structures to summarize data streams into a small number of micro-clusters so that important statistics can be computed conveniently, such as Clustering Feature (CF) (Zhang et al. in Proceedings of ACM SIGMOD, pp 103–114, 1996) for deterministic data and Error-based Clustering Feature (ECF) (Aggarwal and Yu in Proceedings of ICDE, 2008) for uncertain data. However, ECF can only handle attribute-level uncertainty, while existential uncertainty, the other kind of uncertainty, has not been addressed yet. In this paper, we propose a novel data structure, Uncertain Feature (UF), to summarize data streams with both kinds of uncertainties: UF is space-efficient, has additive and subtractive properties, and can compute complicated statistics easily. Our first attempt aims at enhancing the previous streaming approaches to handle the sliding-window model by using UF instead of old synopses, inclusive of CluStream (Aggarwal et al. in Proceedings of VLDB, 2003) and UMicro (Aggarwal and Yu in Proceedings of ICDE, 2008). We show that such methods cannot achieve high efficiency. Our second attempt aims at devising a novel algorithm, cluUS , to handle the sliding-window model by using UF structure. Detailed analysis and thorough experimental reports on synthetic and real data sets confirm the advantages of our proposed method.