Design of sustainable V-based hydrogen separation membranes based on grain boundary segregation

Inter-diffusion between vanadium and palladium coating layers in vanadium-based hydrogen separation membranes is investigated by using a computational approach based on first-principles calculations and semi-empirical atomistic simulations, paying attention to the surface stability and the prevention of the degradation of hydrogen permeability. It is found that the governing mechanism of the inter-diffusion is the grain boundary diffusion, and therefore a diffusion barrier based on the grain boundary segregation of impurities can be an efficient way to inhibit the inter-diffusion that causes the degradation. An interesting aspect in previous experimental works that showed a good resistance to the inter-diffusion by an addition of a trace amount of yttrium is discussed from the view point of the grain boundary segregation. An experiment that proves the validity of the present alloy design scheme (inhibition of inter-diffusion using grain boundary segregation) is carried out, and a process to maximize the sustainability of the membrane is also proposed.     

Effects of moisture on properties of epoxy molding compounds

In this article the effects of moisture on a novel epoxy molding compound, including the mechanical properties, temperature transition, and thermal degradation behavior, are studied. The experimental results reveal that the absorbed water acts predominantly as a crazing agent, continuously decreasing the mechanical strength with the time in water. The glass-transition temperature decreases at the early stage and is finally equilibrated. The thermal degradation behavior of the materials is not greatly influenced by the hydrothermal age. The decomposition of samples in oxygen is composed of two independent steps: the thermal degradation and oxidation at high temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2253–2259, 2001     

Enforcement avoidance behavior near automated speed enforcement areas in Korean expressways

Automated speed enforcement system (ASES) has been deployed as a safety countermeasure on Korean roadways to reduce speeding-related traffic crashes; information on ASES locations is mandated to be open to the public. However, because drivers are alerted about enforcement via on-board navigation systems and roadside signs, they can avoid enforcement by momentarily reducing their speeds near ASES locations. This enforcement avoidance behavior (EAB) can induce sudden changes in speed near the enforcement locations and thereby increase risk of crash occurrence.     

High‐Performance Transition Metal Dichalcogenide Photodetectors Enhanced by Self‐Assembled Monolayer Doping

Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based doping on the performance of WSe₂‐ and MoS₂‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 10¹¹ for octadecyltrichlorosilane (OTS) p‐doping and ≈10¹¹ for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm² V^?1 s in OTS/WSe₂ transistors and from 28.75 to 142.2 cm² V^?1 s in APTES/MoS₂ transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 10⁴ A W^?1) in the OTS/WSe₂ devices and by a factor of ≈26.4 (from 219 to 5.75 × 10³ A W^?1) in the APTES/MoS₂ devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe₂ devices and ≈24.5‐fold in the APTES/MoS₂ devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.     

Ultrasonic atomization of highly viscous biodegradable oils for MQL applications

Journal of Mechanical Science and Technology - This paper establishes the vibrating-mesh ultrasonic mist-generation of highly viscous biodegradable oils as a novel implementation for MQL (minimum...     

Structure Evolution and Electrical Properties of Y3+‐Doped Ba1−xCaxZr0.07Ti0.93O3 Ceramics

Lead free piezoelectric ceramics of Y³⁺‐doped Ba_1?xCa_xZr_0.07Ti_0.93O₃ with x = 0.05, 0.10, and 0.15 were prepared. Composition and temperature‐dependent structural phase evolution and electrical properties of as‐prepared ceramics were studied systematically by X‐ray diffraction, Raman spectroscopy, impedance analyzer, ferroelectric test system, and unipolar strain measurement. Composition with x = 0.10 performs a good piezoelectric constant d₃₃ of 363 pC/N, coercive field E_c of 257 V/mm, remanent polarization P_r of 14.5 μC/cm², and a Curie temperature T_m of 109°C. High‐resolution X‐ray diffraction was introduced to indicate presence of orthorhombic phase. Converse piezoelectric constant d₃₃* of x = 0.10 composition performed better temperature stability in the range from 50°C to 110°C. That means decreasing orthorhombic–tetragonal phase transition temperature could be an effective way to enlarge its operating temperature range.     

Friction and wear behavior of graphite fiber-reinforced composites

Friction and wear behavior of continuous graphite fiber composites was studied for different fiber orientations against the sliding direction. The effect of fiber orientation on friction and wear of the composite and on deformation of the counterface was investigated experimentally. A pin on disk type testing machine was built and employed to generate friction and wear data. A graphite fiber composite plate was produced by the bleeder ply molding in an autoclave and machined into rectangular pin specimens with specific fiber orientations, i.e., normal, transverse, and longitudinal directions. Three different wear conditions were employed for two different periods of time, 24 and 48 hours. The wear track of the worn specimens and the metal counterface was examined and a scanning electron microscope (SEM) to observe the damaged fibers on the sliding surface of the specimen and wear film generation on the counterface. A wear mechanism of the continuous graphite fiber composite during sliding wear is proposed based on the experimental results.     

Coherence technique for noise reduction in rotary compressor

The noise and vibration of a rotary compressor, a type of multi-input, single output system, are generally studied through frequency analysis. Although this method is effective in analyzing frequency components, using this method to identify the specific source of the noise (4 kHz to 6 kHz) is difficult. Hence, noise source should be studied systematically. In this study, a coherence analysis method based on systems analysis is used to identify the compressor noise source. Compressor noise source is identified through the coherence between the vibration signals on the shell of the compressor and the noise signal at one point near the compressor (1 m away from the compressor). A one-third octave band is employed for frequency analysis. The design of experiment is conducted to identify possible noise factors, such as volume, size, and neck area of the resonator in the compressor cylinder. Analysis showed that noise was generated from the cavity of the cylinder and the muffler inside the rotary compressor. A new type of muffler was applied to the rotary compressor to verify this finding. Noise was dramatically reduced.     

First dicadmium(II) complex of tripodal amide ligand with one edge-sharing monocapped octahedral geometry

A new dicadmium(II) complex [Cd₂(L)₂(H₂O)₂](NO₃)₄ · 8H₂O (1) with the tripodal amide ligand L (tris[3-aza-2-oxo-4-(2-pyridyl)butyl]amine) was synthesized and structurally characterized. Complex 1 is revealed as a dinuclear 2:2 (Cd:L) complex, in which each cadmium(II) ion is hepta-coordinated with the coordination surrounding of distorted monocapped octahedral geometry. Two cadmium(II) ions are dibridged by two carbonyl μ-O atoms forming a Cd₂(μ-O)₂ parallelogram-type moiety. Interestingly, the dinuclear coordination sphere can be seen as resulting from the fusion of two distorted monocapped octahedral [Cd(L)(H₂O)]²⁺ units through sharing one edge originated from the two carbonyl μ-O atoms as a first example. Comparative NMR, IR and FAB-mass data of 1 are also discussed.