创新要素集聚与区域创新绩效研究——基于浙江中小企业的实证分析

本文在对浙江中小企业发展模式探讨的基础上,以人才要素、资金要素、技术要素和研发要素四个维度构建了浙江中小企业创新要素集聚的评价指标体系,并且对中小企业创新要素集聚与创新绩效之间的关系进行了理论论述和实证分析。研究结果发现,人才要素、技术要素是推动浙江中小企业创新绩效提升的关键因素,而中小企业集群所衍生出的内部“技术锁定”是影响中小企业资金要素、研发要素对创新绩效产生作用的原因所在。     

特殊钢热循环新工艺

应用电子显微镜、Formaster-Digital全自动相变仪研究了特殊钢相变规律；应用计算机进行了传热、传质计算，研究开发了钢坯、钢锭、轧材、锻件的热处理新工艺。试验研究表明改进特殊钢厂热循环工艺可以大幅度地实现节能，提高生产率。改进后的工艺对提高钢材质量，降低退火钢材硬度有显著效果。     

Effect of amide type modified rapeseed oil as lubricating additive on friction and wear behavior of steel-steel and steel-aluminum alloy systems

A new type of environmentally friendly lube additive-amide type modified rapeseed oil was synthesized and characterized by infrared spectrum. Its effect on the friction and wear behavior of steel-steel and steel-aluminum alloy systems were investigated with a four-ball machine and an Optimol SRV friction and wear tester respectively.The morphographies of the worn surfaces were analyzed by means of scanning electron microscopy(SEM). The worn surfaces of the 2024Al alloy block were analyzed by means of X-ray photoelectron spectroscopy(XPS). The results show that the modified rapeseed oil as additives can obviously decrease the wear rate and friction coefficient of steel pair and steel-aluminum frictional pair. Its lubrication mechanism is inferred that a high strength complex protection films form on the worn surface of the Al alloy due to the adsorption or tribochemistry reaction of a long chain additive molecule and high reaction activity of N element.     

Heat treatment process of new NdFeB magnet prepared by spark plasma sintering

1　INTRODUCTIONTraditionallysinteredNdFeBmagnetcanmeettherequirementofdimensional precisionthroughpost machining ,whichusuallyresultsin 4 5 %ofma terialloss.Post machiningnotonlywastestherareearthresources ,butalsoincreasesthe productioncost .Moreover ,itisdifficulttopreparehomogeneousworkpieceswithlargedimensionandcomplicatedshapeduetosomeuncontrollablefactorsinthecon ventionalsintering process .Ontheotherhand ,al thoughthebondedNdFeBmagnethasbetterforma bilityanddimensionalprecision ,…     

钛对熔敷金属扩散氢逸出特性及组织的影响

利用酒精法测氢技术、三点弯曲法试验，并结合显微分析和断口分析方法探讨了铣含量对熔敷金属扩散氢逸出特性、焊缝组织以及断口形貌的影响。研究结果表明，随着钛含量的增加，熔敷金属扩散氢含量以及扩散氢逸出速率随之下降，焊缝组织中针状铁素体量明显增多，断口纤维率随之增加。     

常压等离子体渗氮工艺的研究

利用介质阻挡放电原理，在自行研制的设备上进行了常压非平衡等离子体渗氮。研究表明，在等离子环境中，试样表面能迅速获得很深的渗层和白亮层，而电场外试样几乎无渗层。说明电场内气体电离率高，活性粒子浓度高。整个工艺过程操作简便，是一种很有发展前景的新工艺。     

C02/H2S对油气管材的腐蚀规律及研究进展

综述了CO2、H2S在单独作用和共存条件下对油气管材的腐蚀机理及影响因素，提出了针对CO2／H2S腐蚀开发经济型油管的设想。     

电化学扫描探针显微镜在腐蚀电化学研究中的应用

从电化学扫描探针显微镜（ECSPM）的工作原理出发，综述了近几年电化学扫描探针显微镜在腐蚀电化学领域的研究进展，指出电化学扫描探针显微镜在原位，局部腐蚀，腐蚀早期过程等电化学中有重要的应用价值。     

Optimal control on special Euclidean group via natural gradient algorithm欧几里德群的最优控制问题

Considering the optimal control problem about the control system of the special Euclidean group whose output only depends on its input is meaningful in practical applications. The optimal control considered here is described as the output matrix is as close as possible to the target matrix by adjusting the system input. The geodesic distance is adopted as the measure of the difference between the output matrix and the target matrix, and the trajectory of the control input obtained in the process is achieved. Furthermore, some numerical simulations are shown to illustrate our outcomes based on the natural gradient descent algorithm for optimizing the control system of the special Euclidean group.     

Flocking under hierarchical leadership with a free‐will leader

Recently, a model for flocking was introduced by Cucker and Smale together with a proof of convergence. This proof established unconditional convergence to flocking (i.e., to a common velocity), provided the interaction between agents was strong enough and conditional convergence otherwise. The strength of the interaction is measured by a parameter β, and the critical value at which unconditional convergence stops holding is β = 1 ∕ 2. This model was extended by Shen to allow for a hierarchical leadership structure among the agents, and similar convergence results were proved. But, for discrete time, convergence result was only for the flock with an overall leader moving with a constant velocity. In this note, we establish convergence result for the flock with a free‐will leader. Copyright © 2012 John Wiley & Sons, Ltd.