Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

The maximum bit rates of soliton communication systems with lumpedamplifiers and filters in different distances

The maximum bit rate of a soliton communication system with lumped amplifiers and optical filters is considered. When the dispersion of the fiber varies from one amplifier spacing to another amplifier spacing, the maximum bit rate is significantly reduced. To overcome the effect, the amplitude of the soliton is amplified so that it is still the average soliton corresponding to the fiber dispersion for an amplifier spacing. Thus, the maximum bit rate is only slightly less than that without the dispersion variations. For a given distance, the maximum bit rate limited by the stability and soliton interaction is obtained. The result is compared with that limited by the Gordon-Haus effect. For shorter transmission distance, the maximum bit rate is limited by the stability and soliton interaction. For longer transmission distance, the maximum bit rate is limited by the Gordon-Haus effect     

我国聚甲醛工业的供需分析

从国内聚甲醛树脂的生产、贸易及消费状况出发 ,分析了国内聚甲醛工业的供需现状并提出短期预测。     

Adsorption and desorption kinetics of hydrocarbons in FCC catalysts studied using a tapered element oscillating microbalance (TEOM). Part 2: numerical simulations

The factors affecting the adsorption and desorption kinetics in a TEOM are reviewed in detail with particular attention given to the assumptions required to obtain physical transport parameters from the data. Two models are presented to simulate TEOM adsorption data in the case that concentration differences down the catalyst bed can be neglected, as is appropriate when the amount of catalyst used is small, the carrier gas flowrate is large, and/or the adsorbate partial pressure is low. In the first model, the effective diffusion coefficient, D_e, is taken to be constant. In the second model, the effective diffusion coefficient is assumed to obey the Darken equation, D_e=D₀/(1−θ). The TEOM results obtained on n-hexane, n heptane, n-octane, toluene and p-xylene on a commercial FCC catalyst and on pure rare-earth exchanged zeolite Y under non-reacting conditions (373-) are analysed in detail. It is found that intracrystalline diffusion is not the limiting factor affecting the overall rates of adsorption and desorption for the systems studied. Instead, it is the transport of molecules between the adsorbed and vapour phases at the edge of zeolite crystallites that is the limiting transport step affecting the overall kinetics. For the FCC catalyst, the limiting step is the transport of molecules at the zeolite-matrix interface rather than, say, the matrix-vapour interface. Local rate constants for the desorption of the hydrocarbons at the rate-controlling interface have been obtained.     

Simulation of carbon nanotube based p-n junction diodes

Taking advantage of the unique characteristics of an ambipolar carbon nanotube field effect transistor (CNTFET), a ‘p-n junction’ is simulated along the single-walled carbon nanotube channel using two separate gates close to the source and drain of the CNTFET, respectively. The current-voltage characteristics of the double-gated CNTFET are calculated using a semiclassical method based on the Schottky barrier field effect transistor mechanism. The calculation results show a good rectification performance of the p-n junction.     

Relational attention-based Markov logic network for visual navigation

The Journal of Supercomputing - We argue the agent’s low generalization problem for searching target object in challenging visual navigation could be solved by "how" and...     

Syntax–Aware graph convolutional network for the recognition of chinese implicit inter-sentence relations

The Journal of Supercomputing - In the literature, most previous studies on English implicit inter-sentence relation recognition only focused on semantic interactions, which could not exploit the...     

Information Seeking Can Be Social

For reasons ranging from obligation to curiosity, users have a strong inclination to seek information from others during the search process. Search systems using statistical analytics over traces left behind by others can help support the search experience.     

Stability radius of implicit dynamic equations with constant coefficients on time scales

This paper deals with the stability radii of implicit dynamic equations on time scales when the structured perturbations act on both the coefficient of derivative and the right-hand side. Formulas of the stability radii are derived as a unification and generalization of some previous results. A special case where the real stability radius and the complex stability radius are equal is studied. Examples are derived to illustrate results.     

A base62 transformation format of ISO 10646 for multilingual identifiers

ISO 10646 Universal Character Set (UCS) is a 31‐bit coding architecture that covers symbols in most of the world's written languages. Identifiers in programming languages are usually defined by using alphanumeric characters of ASCII, which represent mainly English words. An approach for working around this deficiency is to encode multilingual identifiers into the alphanumeric range of ASCII. For case‐sensitive languages, an encoding that utilizes [0–9][A–Z][a–z] can be more space‐efficient for multilingual identifiers. This paper proposes a base62 transformation format of ISO 10646 called UTF‐62. The resulting string of UTF‐62 is within a [0–9][A–Z][a–z] range, a total of 62 base characters. UTF‐62 also preserves the lexicographic sorting order of UCS‐4. Copyright © 2001 John Wiley & Sons, Ltd.